Professional Documents
Culture Documents
1.1 29. Remote Management
1.1 29. Remote Management
1.1 29. Remote Management
Remote Management
KHAWAR BUTT
CCI E # 12353 [R/S, SECURI TY, SP, DC, V OI CE, STORAGE & CCDE]
Overview
Remote Management
Telnet
SSH c
Remote Management
It is not practical to configure the Routers using the Console port as the routers
are generally in a Data Center or in the Server Room.
The Admin needs to configure the Router initially to specify the IP Address
information and configure the Remote Management Protocol.
The 2 protocols that can be used for Remote Management are Telnet or SSH.
Telnet
Telnet is a simple protocol.
In order to configured Telnet, you need to configure a Password for the Virtual
Terminal Lines. You can also do authentication based on Username and
Password.
If the Admin wants to remotely connect into the Privilege exec mode and beyond,
the enable password is also required.
SSH
SSH using encryption to secure the transmission from the router to the
admin device.
c
SSH requires you to create an encryption key.
If the Admin wants to remotely connect into the Privilege exec mode and
beyond, the enable password is also required.
Whiteboard