The document contains a short term CNC course test with multiple choice and fill-in-the-blank questions about CNC machine programming and operation. It covers topics like CNC programming codes, measuring instruments, safety procedures, and technical drawing standards. The test is intended to evaluate the learner's knowledge of fundamental CNC, measurement, and technical drawing concepts.
The document contains a short term CNC course test with multiple choice and fill-in-the-blank questions about CNC machine programming and operation. It covers topics like CNC programming codes, measuring instruments, safety procedures, and technical drawing standards. The test is intended to evaluate the learner's knowledge of fundamental CNC, measurement, and technical drawing concepts.
The document contains a short term CNC course test with multiple choice and fill-in-the-blank questions about CNC machine programming and operation. It covers topics like CNC programming codes, measuring instruments, safety procedures, and technical drawing standards. The test is intended to evaluate the learner's knowledge of fundamental CNC, measurement, and technical drawing concepts.
1. CNC Stands for _________ a) Computerized Numerical Control c) Cad & Cam b) Constant control d) Computerized Neutral Control 2. With __________ positioning, each tool movement is made with reference to the last tool position. a) Absolute b)Incremental c) Co-ordinate d) Off set 3. In Milling ___________ is rotating a) Work b) Vice c) Cutter d) All 4. Main spindle on C/W ________ a).G03 b) M06 c) M03 d).M05 5. Finish Turning Cycle Code _________ a)G72 b)G70 c) G74 d)G71 6. In Milling ___________ is rotating a) Work b) Collet c) Cutter d)All 7. In CNC program the letter ‘O’ indicates _______ a) Machine number b) Program number c) Block number d) None of these 8. In CNC program the letter ‘N’ indicates __________ a) Program number b) Machine number c) Block number d) None of these 9. G17 Indicates _________ Plane a) XY-Plane b) YZ-Plane c) XZ-plane d) All 10. G90 Means _________ System a) Absolute b) Incremental c) A&B d) None of these 11. Centre Punch is ________ Degree a) 90˚ b) 45˚ c) 60˚ d) 30˚ 12. In a lathe machine tool post is a ______ holding device a) Tool b) Drill c) Work d) None 13. In Program ‘S’ indicates _____ a) Cutting speed b) Spindle speed c) Machine speed d) None of these 14. G21 Means ____ dimensioning system a) Metric b) Inch c) A&B d) None of these 15. M98 Means _____ a) Sub Program end b) Sub program Call c) Sub program Stop d) none of these 16. Incremental System code is ___ a) G81 b) G91 c) G51 d) G71
17. G54 Means ____
a) Work offset b) Tool offset c) Program offset d) None of these 18. Tool clamp & D-clamp is done _____ mode. a) Edit b) Auto c) Jog d) Hand 19. Least count of Vernier caliper is ______ a) 0.02mm b) 0.01mm c) 1.0mm d) 2.0mm 20. In Milling _____ axis are their a) 3 b) 2 c) 1 d) None of these 21. Rapid traverse G code is _______ a) G00 b) G01 c) G02 d) G03 22. Making a threads in the hole is called ______ operation a) Reaming b) Tapping c) Drilling d) Boring 23. Number of pass in sub program=_____ a) L b) N c) P d) Q 24. In Turning ___________ is constant a). Work b). Tool c).Chuck d).All 25.Micro meter least count is _____ a)0.01mm b)0.02mm c)0.1mm d)0.2mm 26. 25 microns is equals to ______ a)0.1mm b)0.025mm c)0.25mm d)0.0025mm
27. In CNC turning multiple tool holder is called as _________
a) tool post b)tool holder c)turret d) all the above
28. Choose the correct program number_________
a) O00012 b) O01 c)O2222 d)O025200.
29. M01 stands for _______
a)coolant on b)spindle stop c) spindle on c/w d) optional stop 30. In CNC Turning Programme end block number is _________ a) P b) Q c) R FILL IN THE BLANKS 1. VMC stands for ______________ 2. MDIstands for ______________ 3. DNC stands for ______________ 4. SBK stands for ______________ 5. Coolant on & off ______________ 6. EOB stands for ______________ 7. MLK stands for ______________ 8. WCS stands for ______________ 9. MCS stands for ______________ 10. DRN stands for ______________
MATCH THE FOLLOWING
a) M04 1. Optional stop b) M08 2. Program end & reset c) M30 3. Sub program end d) M98 4. Mirror command on along X axis e) M65 5. Sub program Call f) M99 6. Spindle on C/W g) M01 7. Coolant On h) M00 8. Program end i) M02 9. Program stop j) M03 10. Spindle on CC/W
ANSWER THE FOLLOWING QUESTIONS
1. Write the advantages and disadvantages of CNC machines. 2. Write rough turning and finishing program for the below job. 3. Write the simple program for the following job
4. Write the industrial safety?
5. Name the different types of measuring instruments?
6. Write any five preparatory and miscellaneous codes?
7. Name the different drawing sheet size?
8. Write the difference between first angle & third angle projection?
9. Write the different types of line and its application?
10. Name the different types of scale with examle?