Professional Documents
Culture Documents
Topics: Introduction of Printing: Tariqul Islam Wet Processing-II (WPE-343) Lecturer (TECN)
Topics: Introduction of Printing: Tariqul Islam Wet Processing-II (WPE-343) Lecturer (TECN)
Fabric Printing: “Textile Printing” refers to the localized application of dyes or pigments and
chemicals by any method which can produce particular effect of colour on the fabric according
to the design. It is done on the right side of the fabric with the wrong side being unprinted or
much lighter than the right side.
Dyeing Vs Printing:
Dyeing Printing
There is no localized application. Localized application of dyes or pigments
according to design.
Colour: In form of solution. Colour: In form of thick paste.
Fabric, yarn & fibres are dyed. Fabric is only printed.
Steaming is not required. Steaming is used for fixation.
Much amount of water is used. Less amount of water is used.
More time is required. Less time is required.
Only mono color application. Both mono & multi-color application.
Dyeing machineries are comparatively simple. Printing machineries are comparatively
complex.
Fabric is handled in open width or rope form. Fabric is handled in only open width.
Salt is required. Salt is not used.
Color is applied uniformly on both faces. Printed face is darker & other face is paler.
Processed fabric may be wet or dry. Processed fabric must be dry.
Printing Flow-chart: