Professional Documents
Culture Documents
SE Structural Course Slide Corrections
SE Structural Course Slide Corrections
17 Lateral Forces, Bridges: Wind Loads and Seismic Detailing
Slide: 26
Change From:
To:
Slide: 28
Change From: 0.031
To: 0.093
Slide: 33
Change From: 0.010
To: 0.1
Slide: 67
Change From: (C) vertical
To: (C) transverse
Last Update 10/2/2019 Page 1 of 1
Structural Engineering Course Slide Corrections
01 Calculating Vertical Loads
Slide: 37
Change From: minimum roof snow load may need to be adjusted for
To: roof snow load may need to be adjusted for
Slide: 39
Change From:
To:
02
Slide: 139
Change From: ...at each bare end...
To: ...at each bar end...
Slide: 148
Change From:
To:
Last Update 8/13/2019 Page 1 of 1
SE Structural Course Slide Corrections
04 Reinforced Concrete Design Part 2
Slide: 21
Change From:
To:
Slide: 78
Change From: In lecture note area, change ACI Sec. 13.4
To: ACI Sec. 22.6.4.3
07 Steel Part 1
Slide: 23
Change From: "Lateral displacement" dimension for flange on Section A‐A is shown from tip to
centerline of rotated section
To: Dimension should instead indicate flange‐tip‐to‐flange‐tip of the undisplaced to
displaced beam
08 Steel Part 2
Slide: 130
Change From: On the diagram for Tension Field Action, we recommend that the "no tension field
action" bays adjacent to the web opening be labeled as "adjacent" to the hole and
therefore DQ'd from TFA
To: bays adjacent to the web opening be labeled as "adjacent"
Last Update 8/22/2019 Page 1 of 1
PE Environmental Engineering Slide Corrections
05 Foundations
Slide: 62
Change From: Bullet in right column should be the second bullet on the page.
To: • align...
• take moments...
• sum...
Last Update 8/26/2019 Page 1 of 1
PE Environmental Engineering Slide Corrections
06 Prestress Concrete
Slide: 77
Change From: Per
To: Pel
Last Update 9/9/2019 Page 1 of 1