This document outlines steps for configuring and testing features in an E-Series storage array simulator lab, including:
1. Configuring volumes, volume groups, hot spares, scripts and profiles.
2. Simulating drive failures and replacements to test degraded mode and repair.
3. Creating hosts, LUNs, snapshots and copies to test data protection features.
4. Configuring and testing asynchronous and synchronous mirroring between arrays.
This document outlines steps for configuring and testing features in an E-Series storage array simulator lab, including:
1. Configuring volumes, volume groups, hot spares, scripts and profiles.
2. Simulating drive failures and replacements to test degraded mode and repair.
3. Creating hosts, LUNs, snapshots and copies to test data protection features.
4. Configuring and testing asynchronous and synchronous mirroring between arrays.
This document outlines steps for configuring and testing features in an E-Series storage array simulator lab, including:
1. Configuring volumes, volume groups, hot spares, scripts and profiles.
2. Simulating drive failures and replacements to test degraded mode and repair.
3. Creating hosts, LUNs, snapshots and copies to test data protection features.
4. Configuring and testing asynchronous and synchronous mirroring between arrays.
2. Name or Rename an Array 3. Synchronize Controller Clocks 4. Create Global Hot Spare 5. Change Default Group OS to “Windows 2008” 6. Create the following Volume Groups & Volumes
7. Show Volume “Change” behaviours
8. Create DDP “GenWorkloadPool” with 12 disks 9. Change Pool Settings to a. 90% Critical Warning b. 70% Early Warning c. Background Op to Lowest Priority d. Preservation to 1 disk 10. Create DDP Volume
11. Goto Marketing Volume and Disable Write Caching
12. Delete Marketing Volume 13. Save Configuration to “TES_Config” 14. Enterprise Window -> Tools -> Execute Script -> Load Script -> “TES_Config.cfg” 15. Save Storage Array Profile to TES_Profile and view it with a text editor 16. Exit SANtricity and Break
18. View Physical Drives associated with Mar_VG 19. Failed a drive in Mar_VG (Mar_VG is now in degraded mode) 20. Replace failed drive (Mar_VG now optimal) 21. Revive failed drive (Storage now optimal) 22. Define “TES_Host1” and view its properties a. Storage Partitions b. TES_Host1_port1 c. TES_Host2_port2 d. Windows 2008 e. No shared access 23. Change WebSales Volume from Default Group to TES_Host1 as LUN 0 24. Moved all other Volumes from Default Group to TES_Host1 25. Create SnapShotImage on Marketing_2 a. Manual b. Marketing_2_SG_01 c. View Advance Options 26. Create a second SnapShotImage using the same Snapshot Group 27. Delete the second SnapShotImage 28. Delete both SnapShotImage 29. Delete Snapshot Group & its repository 30. Use Inv_VG Volume Group to create a. Exchange_Target Volume b. 5GB c. File system IO d. Map later 31. Use Exchange Volume to create a. Offline Volume Copy b. Exchange_Target c. Set Copy Priority to Highest 32. View Menu -> Monitor -> Reports -> Operations in Progress (click refresh button) 33. Goto Menu -> Copy Services -> Manage Copies and change the following: a. Re-Copy b. Remove Copy c. Disable Read Only 34. Add 1 drive to MAR_VG 35. Change MAR_VG to RAID 10 36. Change Segment Size of WebSales to 64KB 37. Activate Asynchronous Mirroring on both Storage 38. Create an Asynchronous Mirror Group & Mirror Pair using Exchange Volume 39. Goto Remote Storage & Complete Mirror Pair using Automatic add Volume & Repository 40. At MirrorGroup, change synchronization setting to Automatic 41. Change the role of the Secondary to Primary 42. Activate Synchronous Mirroring on both Storage 43. Make sure each storage has a volume of the same size 44. Create a Synchronous Mirror Pair between the two volumes 45. Change Synchronization Setting to Automatic 46. Change the role of Primary to Secondary