Professional Documents
Culture Documents
Olb y LBH Appleton
Olb y LBH Appleton
Applications
• Meet a wide range of classified area
requirements.
• Corrosion-resistant–ideal indoors or out.
• For pulling of wires.
• Connect conduit lengths and change
direction of conduit.
• Provide access for maintenance.
Features: All Bodies and Boxes
• Malleable iron bodies have high
tensile strength and ductility. Provides
great resistance to corrosion, impact,
and shock.
• Accurately tapped, tapered hub
threads for tight, rigid joints and ground
continuity.
• Furnished with covers.
• General purpose wiring.
Features: GR and GRF
➊GR offers ten hub arrangements.
➋GRF has integral mounting flange.
• Function as sealing fittings when
used with sealing covers (see NEC for
restrictions).
• Internally threaded body with
externally threaded cover.
• Covers have pry notches for bar or
J
wrench.
• Accommodate sealing, dome, hub
and union hub covers, and canopies.
• Standard O-rings provide raintight fit.
NEMA 3,4.
• Internal ground screw standard.
• Smooth, rounded integral bushing in
each hub type box protects conductor
insulation.
Features: GRH
➌Designed for use in Class I, Groups
A, B, C, and D; Class II, Groups E, F,
and G; and Class III.
• Inter nally threaded body with
externally threaded covers.
• Standard O-rings provide raintight fit.
NEMA 3,4.
• Internal ground screw standard.
• Smooth, rounded integral bushing in
each hub type box protects conductor
insulation.
14 GU
Features: ELBD
➍Exclusive built-in pulling rollers in
each end (2-1/2 thru 4” sizes) protect 13 GRSS
cable from damage and make cable
pulling easier.
Effective September, 2005 800-621-1506
Copyright 2005 www.appletonelec.com
PAGE 2
J-3
Conduit Outlet Boxes and Bodies:
Malleable Iron or Aluminum;
Explosionproof, Dust-Ignitionproof
UNILETS® for use with Threaded Metal Conduit.
• Excellent for use in wiring of motors, • Function as sealing fittings when Features: GRSS and GRSSA
panelboards, circuit breakers, entrances used with sealing covers (see NEC for •
13Multiple hubs permit flexibility.
to buildings, etc. restrictions).
• • Copper-free aluminum body and
• Body and cover have ground mat- Inter nally threaded body with
externally threaded cover.
cover provide superior corrosion
ing surfaces to meet classified-location resistance.
requirements. • Smooth, rounded integral bushing in
• Internal ground screw standard.
• Smooth, rounded integral bushing in each hub type box protects conductor
insulation. Features: GU
each hub type box protects conductor
insulation. Features: GRJ •
14Designed for Class I, Groups B,C,D;
Class II, Groups E,F,G; and Class III.
Features: ELBY Small, round conduit outlet boxes.
• • Exter nally threaded body with
Serve as pulling fittings. • Function as sealing fittings when internally threaded cover.
• Make 90° bends in conduit. used with sealing covers (see NEC for • Smooth, rounded integral bushing in
• Threaded cover opening permits easy restrictions). each hub type box protects conductor
access for pulling conductors thru hubs. • Externally threaded body with inter- insulation.
• Easily removable threaded cover. nally threaded cover. • Internal ground screw standard.
Features: CPU • Smooth, rounded integral bushing in
Standard Materials
each hub type box protects conductor
Universal design with four threaded insulation. • GR, G R F, G R H , a n d G R J S :
universal hubs and three close-up Malleable iron bodies with aluminum
plugs. Features: ER covers.
• Serve as mounting outlets for lighting Compact, rectangular conduit outlet
boxes are ideal in classified locations
• Aluminum GR Series: Copper-free
fixtures when used with hub cover. body and cover.
• Wide, accurately ground explosion- where space is limited.
• GU, GRUO, GRUJ, GRU (Union),
proof mating surfaces. • Six different hub arrangements. GRJ, CPU, ER, ELBD and ELBY:
• Smooth, rounded integral bushing in • Ground surface contact between body Malleable iron bodies and covers.
each hub type box protects conductor and cover assures a flame-tight joint. • GRU, GRUE, and GRSS: Aluminum
insulation. • Smooth, rounded integral bushing in copper-free bodies and covers.
Features: GRU and GRUE each hub type box protects conductor
insulation.
• GRG O-Rings: Neoprene.
Universal design with five threaded Standard Finishes
Features: GRUO and GRUJ
•
J
universal hubs and three close-up Malleable iron bodies and
plugs. • Threaded universal hubs for wiring covers (except ELBY) triple-coat—
• Copper-free aluminum body and flexibility. (1)zinc electroplate, (2) dichromate, and
cover provide resistance to corrosive GRUO has eight hubs. (3) epoxy powder coat.
atmospheres. GRUJ offers up to eleven hubs. • Aluminum bodies and covers: epoxy
• Function as sealing fittings when
• Ideally suited for use where space is
powder coat.
used with sealing covers (see NEC for
restrictions). limited, such as for gasoline pumps. • ELBY malleable iron body and cover:
zinc electroplate and clear chromate.
• GRU has internally threaded body • Function as sealing fittings when
Options
and externally threaded cover. GRUE used with sealing cover (see NEC for
has externally threaded body and restrictions). • PVC available—consult factory.
internally threaded overlapping cover. • Externally threaded body with inter-
Compliances
• Standard O-Rings provide raintight fit. nally threaded covers.
• UL Standard 886.
NEMA 3,4. • Smooth, rounded integral bushing in
• Federal Spec. W-C-586B.
• Covers have pry notches for bar or each hub type box protects conductor
insulation. • Appleton malleable iron products
wrench.
conform to ASTM A47-77, Grade
• Smooth, rounded integral bushing in Features: GRU (Union Hubs) 32510, which has the following proper-
each hub type box protects conductor Union hubs permit easy wiring. ties: tensile strength, 50,000 psi; yield,
insulation.
• Function as sealing fittings when 32,000 psi; and elongation, 10%.
Features: GRJS used with sealing covers (see NEC for • Appleton aluminum products are
Universal design with five threaded restrictions). produced from a high strength copper-
openings and three close-up plugs. • Externally threaded body with inter- free (4/10 of 1% max.) alloy.
• Compact round box for use where nally threaded cover. • Suitable for Class I, Div. 1 & 2, if
space is limited. • Smooth, rounded integral bushing in installed in compliance with NEC 501-
4(a)(b) and for Class II, Div. 1 & 2, if in
• Serve as mounting means for lighting each hub type box protects conductor
insulation. compliance with NEC 502-4(a)(b).
fixtures when used with hub cover.
• GR Series: CSA -LR25875-30.
Effective September, 2005 800-621-1506
Copyright 2005 www.appletonelec.com
PAGE 3
Class I, Div. 1 and 2
J-15
Groups D ER Conduit Outlet Boxes:
Class II, Div. 1 and 2 Explosionproof, Dust-Ignitionproof
Groups E,F,G
Class III UNILETS® for use with Threaded Metal Conduit.
J
ERT 1/2 ERT50
3/4 ERT75
Hub
Size (In.) A B C D E F G H
Dimensions in Centimeters
JJ
GU All 19.0 311.4
ELBD 7.0 7.0 25.0 25.0 69.0 69.0 240.0 240.0 540.0 540.0
ELBD 114.7 114.7 409.7 409.7 1130.7 1130.7 3932.9 3932.9 8849.0 8849.0
GU ELBD
GRSS