1. American Petroleum Institute (API), 1220 L Street, N.W., Washington,
D.C. 20005. API RP14F, Design and Installation of Electrical System for Offshore Produc- tion Platforms. API Standard 614, Lubrication, Shaft-Sealing, and Control-Oil Systems for Special-Purpose Applications. API Standard 616, Type H Industrial Combustion Gas Turbines for Refinery Services. API Standard 670, Vibration, Axial-Position, and Bearing-Temperature Moni- toring Systems. API Standard 11E, Specification for Pumping Units. 2. American Society of Mechanical Engineers (ANSI/ASME), United Engi- neering Center, 345 East Forty-Seventh Street, New York, NY 10017. B133.6-1978, Procurement Standards for Gas Turbines. PTC 19.5-1959, Flow Measurement. PTC 22-1985, Gas Turbine Power Plants. 3. Diesel Engine Manufacturers Association (DEMA). Standard Practices for Stationary Diesel and Gas Engines, 1972. 4. Durham, G., O. Marcus and Clark R. Lockerd Optimal Sizing of Motors for Beam Pumping Units, Paper No. PCIC 87-35. Copyright material of Institute of Electrical and Electronic Engineers (IEEE). 5. Electrical Design Guide for Non Electrical Engineers, (Chevron USA, Rich- mond Refinery). 6. Electrical Drafting and Design, Charles W. Snow (Prentice-Hall, Inc., 1976). 7. Electric Machinery Synchronizer, McGraw-Edison. (Latest publication by Elec- tric Machinery Mfg., Company, Minneapolis, Minnesota). This is a basic reference which includes discussion on induction motors, synchronous motors, generators and controls. 8. Engineering Data Book, (Gas Processors Association, 1987).
Chevron Corporation Reference-1 October 1989
References Driver Manual
9. Gas Turbine Engineering Handbook, Meherwan P. Boyce, Second Printing,
January, 1987, Gulf Publishing Company. A reference covering design, major components, materials, fuel systems and technology, auxiliary components, installation, operation and maintenance. 10. Grouting Handbook, (U.S. Grant Corporation, 1983). 11. IMI Candidate Manual, Integrated Machinery Inspection Staff (Chevron USA, 1981). 12. Internal Combustion Engines and Air Pollution, Edward F. Obert (Harper & Row, Inc., New York, 1968). 13. Machinery Reliability Procedures, (Chevron USA, 1986). 14. National Electrical Manufacturers Association (NEMA) Washington, D.C. MG 1-1987. A reference covering dimensions, ratings, testing, application and performance of electrical machines. 15. Practical Machinery Management for Plants, Volume 2, Heinz P. Block (Gulf Publishing Company, 1983). 16. Sawyer’s Gas Turbine Engineering Handbook, Third Edition, Turbomachinery International Publications. A reference covering theory and design, selection and application, accessories and support. 17. Sawyer’s Turbomachinery Maintenance Handbook, Volume 1. Edited by John W. Sawyer (Turbomachinery International Publications, 1980). 18. Sillett, E., Electric Motor Bearing Lubrication, February 1987, Society of Tribologists and Lubrication Engineers. 19. Standard Handbook for Electrical Engineers, Eleventh Edition, Donald G. Fink and H. Wayne Beaty (McGraw-Hill Book Company). 20. Total Alignment, V. R. Dodd (Petroleum Publishing Co., 1975). 21. Turbomachinery Handbook (Gulf Publishing Company, 1974).
Induction Coils - How To Make, Use, And Repair Them: Including Ruhmkorff, Tesla, And Medical Coils, Roentgen, Radiography, Wireless Telegraphy, And Practical Information On Primary And Secodary Battery