Professional Documents
Culture Documents
Lecture 7 Material, Tools, and Equipment
Lecture 7 Material, Tools, and Equipment
Crimping tools - Is used for joining two or more pieces of metal or other ductile
material by deforming one or both of them to hold the other.
MATERIALS, TOOLS, EQUIPMENT and TESTING DEVICES - The bend or deformity is called the crimp.
Materials
8. Soldering iron (30 watts) - is a hand tool used in soldering. It supplies heat to
- the matter from which a thing is or can be made. melt solder so that it can flow into the joint between two workpieces.
Examples: 9. Wire stripper - is a small, hand-held device used to strip the electrical insulation from
electric wires.
1. Software Applications
2. Network OS Software 10. LAN Tester - is designed to test most network cable wiring.
3. RJ 45- is a standard for a physical interface between customer wiring and telephone
company wiring. 11. Anti-static wrist wrap - is a key piece of safety gear that helps to prevent the buildup
of static electricity near sensitive electronics or other projects where static charge
4. UTP Cat5 Cable- Unshielded Twisted Pair, is a popular type of cable used in computer could damage electronics or cause safety issues.
networking that consists of two shielded wires twisted around each
Examples:
Tools
- a handheld device that aids in accomplishing a task. 1. LAN Card - is a network interface card. This is a computer circuit board or card that is
installed in a computer so that it can be connected to a network.
Examples: 2. UPS - is an electrical apparatus that provides emergency power to a load when the
input power source or mains power fails.
1. Screwdriver(standard) – is used to drive or fasten negative slotted screws
3. Server - is a part of a network. It is a special computer that users on the network can
2. Screwdriver(Philips) - is used to drive or fasten positive slotted screws access to carry out a particular job.
3. Long nose pliers - is used for holding, bending and stretching the lead of electronics 4. Port-hub - is a connector on the back of a computer or other device.
component or connecting wire.
5. Modem - is a device that allows a given computer to share data or otherwise a device
4. Mechanical pliers – used to hold objects firmly, which let computers exchange information.
5. Allen wrench - is a simple tool used to drive bolts and screws with hexagonal sockets 6. Fax machine - is a device that is used to send documents electronically over a
in their heads. telephone network
9. USB Flash Drive - is a plug-and-play portable storage device that uses flash memory
and is lightweight enough to attach to a key chain.
10. BIOS - is a chip that controls the most basic functions of the computer and performs a
self-test every time you turn it on.
11. RAM - is a primary memory.
- This memory is used inside the computer to hold programs and data while it
is running.