Professional Documents
Culture Documents
Az - GHD HH - Jungle - Gfo - Copie
Az - GHD HH - Jungle - Gfo - Copie
chemical additives with GEM's advanced cEOR chemical additives based cEOR processes.
features. GEM is the only simulator that models STARS is the only simulator that accounts for the
Miscible Injection + Foam + ASP + Low salinity in complex phenomena required to accurately
a single model model processes such as Alkaline-Surfactant-
Polymer (ASP) flooding, low salinity water
Full physics capability for modelling ASP, injection, and foam flooding.
Foam and other cEOR processes in both clastic Eeasily set-up, design and evaluate
and carbonate reservoirs the effectiveness of all chemical
Model polymer, surfactant or Alkali injection additives and recovery processes
with geochemical effects Advanced process wizards allows for
Accurate ASP process modelling with quick and easy model building of most
saponification (create soap in-situ) and salinity advanced cEOR processes
gradients in full-field 3D environment Recover more oil by accurately
Achieve optimum recovery and prevent modelling effects of IFT reduction in
process failures by maintaining a strict salinity the reservoir via recurrent relative
gradient during an ASP flood permeability interpolation
Models Windsor type I, II and III phase Reaction kinetics for rate-temperature-
behavior during ASP injection process concentration dependent processes
Models Micro Emulsion (ME) phase using two allow for proper modelling of ASP
liquid phases (oil and water) floods
Simulate mobility control by polymers or foam Mechanistically model complex foam-
injection, and interfacial tension reduction using flooding physics, or full-field enhanced
surfactants and/or alkalis low salinity waterfloods
Study complex effects of foam with the Properly capture the formation,
empirical foam model breaking of emulsions and foams by
Forecast production/recovery factor by simulating it via reactions
configuring lab scale or full-field ASP or Foam Model important fluid-reservoir rock
models, using Builder process wizard chemical reactions (geochemical
Improve recovery and NPV by reactions) including aqueous
optimizing chemical slug size, concentration, electrolyte chemistry,
injection schedule, and optimal injector- precipitation/dissolution of minerals
producer well location and ion exchange reactions with clays
Optimize chemical EOR design and
operational parameters using CMOST