Professional Documents
Culture Documents
D Cosp309 WW Eng Indnet8 Portdinrailmnt W
D Cosp309 WW Eng Indnet8 Portdinrailmnt W
specifications
8-port DIN rail mount copper patch panel shall be made of high impact 8-Port DIN Rail Mount Copper
polycarbonate material and shall mount to a standard 35mm DIN rail. Patch Panel
Product shall have a removable faceplate that includes four label 8-port DIN panel: CDPP8RG
pockets, labels and covers for port identification. The product shall
include adjustable latches to lock it in place when mounted on the Mini-Com ® Copper Jack Modules
DIN rail. Latch design shall also allow product to mount on a flat surface Category 6,
for vertical bulkhead mounting. 8-port DIN rail mount patch panel shall unshielded: CJ688TG**
accept any Mini-Com® Module that occupies a single space. The
Category 6,
panel shall be suitable for use in shielded or unshielded applications.
unshielded, keyed: CJK688TG**
technical information Category 6,
shielded: CJS688TGY
Standards: Norme International Standard CEI IEC 60715; DIN EN 60715; Category 6,
DIN EN 50022; DIN 46277-3; BS 5584:1978:, IEC 60068 shielded, keyed: CJSK688TG**
Environmental Testing; cULus Listed to UL1863
Category 5e,
Material: ^
UL94V-0, Impact-resistant polycarbonate unshielded: CJ5E88TG**
RoHS compliance: Compliant Category 5e,
unshielded, keyed: CJK5E88TG**
Mounting options: Mounts to a standard 35mm DIN rail; can also mount to other Category 5e,
surfaces using mounting holes in latches shielded: CJS5E88TGY
Packaging: Copper patch panel includes 6-32 x 3/8" phillips head screws Category 5e,
to mount faceplate to patch panel and 4 labels and shielded, keyed: CJSK5E88TG**
label covers. Mini-Com ® Blank Modules
Temperature: Temperature range of -10°C to 60°C (14°F – 140°F) complies Blank modules: CMBIG-X‡
to UL 508 A Control Panel standard and operating range of
the ethernet switches Shielded Jack Module
Shielded applications: For use in shielded or unshielded applications; for shielded Grounding Kit
application, use with grounding kit CJSGK-XY Grounding Kit: CJSGK-XY
Pre-configured large
DIN rail mount Employs dual purpose, snap-in mounting latches which have an
(3-DIN rail) zone
audible click to indicate the latch is in the correct position. The
enclosure: IAZ2436C
latches serve to hold the unit on the DIN rail while allowing it to
slide side to side. Latches also serve as wall mounting brackets Pre-configured medium
via an external mounting hole in the latch. (2-DIN rail) zone
enclosure: IAZ2424C
Modular Accepts up to eight single Mini-Com® Copper and A/V Modules. Pre-configured small
Patching Easy and logical port mapping to common Ethernet mini-switch (1-DIN rail) zone
ports enables convenient MACs (Moves, Adds and Changes) enclosure: IAZ1214C
in industrial telecommunications zone enclosure or control
panel applications. IndustrialNet™ 8-port DIN Rail Mount Ultimate ID ® Replacement Covers
Patching Solutions provides a testable permanent link for link 2-port clear cover: UILC2CL-X
commissioning and troubleshooting, and provides flexibility and
scalability for future growth. Ultimate ID ® Labels
Identification DIN rail mount patching solutions include label pockets, labels, 2-port white,
and transparent label covers for clear identification; complies non adhesive: UILWOL2-L
with ANSI/EIA/TIA-606-B labeling requirements LS8E and LS9: UILS8BW
Laser/Ink Jet: UILJ2
applications ** = IW (Off White), WH (White),
IG (International Gray), AW (Arctic White),
IndustrialNet™ 8-port DIN Rail Mount Patching structured cabling solutions are important as EI (Electric Ivory), BL (Black), BU (Blue),
Solutions conserve precious real estate by Ethernet reaches further into the industrial RD (Red), YL (Yellow), GR (Green),
consolidating all patching onto the DIN rails automation network, enabling traditional OR (Orange), VL (Violet). Keyed jacks are not
available in all colors. See www.panduit.com
of a zone enclosure or control panel, and are IT departments to manage change in the for the complete selection.
designed to “port map” to Industrial Ethernet industrial network through the use of familiar ‡For other colors, replace
modular mini-switches. These products patching facilities and structured cabling IG (International Gray) with IW (Off White),
can be deployed as flexible, reconfigurable models. The use of Panduit IndustrialNet™ EI (Electric Ivory), WH (White),
and high performance structured cabling Modular Patching allows customers to easily RG (Rock Gray), or BL (Black).
elements in traditional hierarchical star, fiber deploy copper connectivity in the same For complete copper patch cord offering,
visit www.panduit.com
to the enclosure (zone) or device level ring modular DIN footprint in such applications.
Industrial Ethernet architectures. These
w w w. p a n d u it.c o m
IndustrialNet™ 8-Port DIN Rail Mount Copper Patching Solution
Ty p i c a l C o n f i g u r a t i o n s f o r 8 - P o r t D I N R a i l C o p p e r P a t c h P a n e l
CDPP8RG CMBIG-X
(8-port DIN Rail Copper Patch Panel) (Blank Adapter Module) Copper Jack Modules P/Ns Qty.
1 4 CJ688TG**, CJK688TG**, CJS688TGY, 4
CJSK688TG** – Category 6 copper jack module.
1 4 CJ5E88TG**, CJK5E88TG**, CJS5E88TGY, 4
CJSK5E88TG** – Category 5e copper
jack module.
1 0 CJ688TG**, CJK688TG**, CJS688TGY, 8
CJSK688TG** – Category 6 copper jack module.
1 0 CJ5E88TG**, CJK5E88TG**, CJS5E88TGY, 8
CJSK5E88TG** – Category 5e copper
jack module.
Available colors listed on the previous page.
5.66
5.92 [144]
[105]
6.62
[168]
Latches
engaged