The document summarizes the design check of a pin connection according to EN 1993-1-8:2005. The pin has a diameter of 150mm, is made of steel S355J2, and is designed to resist a shear force of Fv,Ed=3049 kN. All design resistances including shear, bearing, bending and combined shear and bending are calculated and found to be greater than the design forces, indicating the pin connection is adequate.
The document summarizes the design check of a pin connection according to EN 1993-1-8:2005. The pin has a diameter of 150mm, is made of steel S355J2, and is designed to resist a shear force of Fv,Ed=3049 kN. All design resistances including shear, bearing, bending and combined shear and bending are calculated and found to be greater than the design forces, indicating the pin connection is adequate.
The document summarizes the design check of a pin connection according to EN 1993-1-8:2005. The pin has a diameter of 150mm, is made of steel S355J2, and is designed to resist a shear force of Fv,Ed=3049 kN. All design resistances including shear, bearing, bending and combined shear and bending are calculated and found to be greater than the design forces, indicating the pin connection is adequate.