Professional Documents
Culture Documents
Codigos de Diodos SMD PDF
Codigos de Diodos SMD PDF
Codigos de Diodos SMD PDF
8mm 8mm
Package Suffix Tape Orientation Package Suffix Tape Orientation
X2-DFN1010-4
Bar Denotes Cathode Side X2-DFN1210-6
X2-DFN1210-8
X3-DFN0603-2 -7 X2-DFN1409-6
X2-DFN1410-6
X2-DFN1612-8
U-DFN2020-6 Type B
U-DFN2020-6 Type C
-7
U-DFN2030-8
Dot Denotes Cathode Side V-DFN3020-14
U-DFN3030-8 Type E
X1-DFN1006-2 -7 U-DFN3030-10
X2-DFN1006-2 -13 U-DFN3030-12
U-DFN3030-14
U-QFN3030-16
U-QFN3030-20
Pin 1
-7
X1-DFN1006-3 X1-DFN1212-3 -7
-13
X2-DFN1006-3 X1-DFN1212-3 Type B -13
X2-DFN0606-3
X2-DFN0806-3
X1-DFN1006-3 -7B X2-DFN1310-6 -7
X2-DFN1006-3
X2-DFN0808-4 X1-DFN1411-3
U-DFN2020-3
X2-DFN1010-6 TA
-7 U-DFN2020-6 Type E
U-DFN2018-6 -7
X2-DFN2020-6
X2-DFN3020-6
U-DFN2523-6
Pin 1
Pin 1
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only. Direction of feed
AP02007 Rev. 74 3 of 17 Surface Mount (SMD) Packaging
www.diodes.com © Diodes Incorporated
Device Tape Orientation
For Part Marking, Refer to Datasheet
8mm 8mm
Package Suffix Tape Orientation Package Suffix Tape Orientation
U-DFN1610-6
X2-DFN2015-8 -7 V-DFN3020-8 Type B TA
U-DFN3020-8 Type M
Pin 1
Pin 1
V-DFN3020-8 Type K
V-DFN3030-8
-7
U-DFN2020-3 -7
TA
Pin 1
U-DFN2020-3 Type B TA
W-DFN3020-12 -7
-7
U-DFN2030-6 Type B -13 U-DFN3030-4 -7
U-DFN3030-8
U-DFN3030-8 Type B
X1-DFN2030-8 -7 U-DFN3030-8 Type D -7
U-DFN2510-10
X1-DFN3313-8
-7
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only. Direction of feed
8mm 8mm
Package Suffix Tape Orientation Package Suffix Tape Orientation
POWERDI®123 SOT25 -7
POWERDI®323 -7 SOT353 -13
SOD323F SOT553 TA
SOT25
SOT353
TSOT25 -7
POWERDI®3030-8 -7
TA
Note: Analogue
Only
SOT25
SC59 -7
SOT353
SOT23 TA -7
SOT553
SOT523 TD
SOT23F -13
Note: Logic Only
SC74R
SOT26
SOD123 -7 SOT363
-7
SOD323 -13 SOT563
* SOD-523 only -13
SOD523* TA SOT666
SOD923 TC TSOT26
YM
YM
KXX YM KXX KXX
(Asymmetrical)
SOT-563 / SOT-666 SOT-26/SOT-363 SC-74R
SOT26
-7 SOT363 -7
SOT143
SOT563 -13
(Symmetrical)
KXX YM
KXX YM KXX YM
SOT-26/SOT-363 SOT-563
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only.
Direction of feed
8mm 8mm
Package Suffix Tape Orientation Package Suffix Tape Orientation
-7
SOT963
SOT323 -13 -7
Symmetrical
TA
U-WLB0707-4
-7R -7
SOT363 U-WLB0808-4
-13R
YM
KXX
SOT-363
X3-WLB1006-2 -7
SOT563 -7B
X3-WLB1406-2
X3-WLB1608-2
SOT953 -7 -7
X2-WLB2010-2
SOT963 U-WLB1010-4
-7 -7
Asymmetrical U-WLB1515-9
U-WLB1510-6
SOT963
-7B X1-WLB1818-4 -7
Asymmetrical
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only.
Direction of feed
8mm 8mm
Package Suffix Tape Orientation Package Suffix Tape Orientation
U-WLB1510-6 -7R
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
Direction of feed
12mm 12mm
U-DFN4030-12 MSOP-8 TA
U-DFN4030-14 -13 MSOP-8-EP -13
U-QFN4040-16 MSOP-10 TC
U-DFN4030-12 Type B
-13 -7
U-DFN4030-12 Type C POWERDI®3333-8
U-DFN4030-12 Type D -13
Pin 1
U-QFN4040-16 Type B TC
W-DFN5060-4 -13 U-QFN4040-20 Type B TC
Pin 1
-7
MELF U-QFN4040-16 Type C -13
-13
MiniDIP -T
QSOP-16 TC
T-MiniDIP -13
Pin 1
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only.
Direction of feed
12mm 12mm
Package Suffix Tape Orientation Package Suffix Tape Orientation
-13
SMB -13 SOT223
TA
TC
-13
SO-8 TSSOP-14
TA -13
SO-8EP TSSOP-16EP
TC
-7
SOT89-3
-13
-7R
SOT89-3
-13R
TA
SOT89-3
TC
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only.
Direction of feed
16mm 16mm
DF-S -T QSOP-20 TC
+ + +
® -7
POWERDI 5 TSSOP-20EP TC
-13
® -7
POWERMITE 3 -13
-13
TO252 (DPAK)
TC
SOP-14 -13
SOP-16 -13
Note: a) Device tape orientation applicable to all product types unless otherwise specified.
b) Tape and package drawings are not to scale and are shown for device tape orientation only.
Direction of feed
D2PAK -T
POWERDI 5SP
TO263 -13 POWERDI 5SP-B
-13
YYWWK
ABCDE
Cathode notch
B1 D1 K R
Tape Size F P2 W Package Type
max min max min
1.0 (Note 2) Refer to 8mm Device Tape
8mm 4.5 0.35 (Note 3) 3.5 0.05 2.4 2.0 0.05 25 8.0 0.30
Orientation Table
Refer to 12mm Device Tape
12mm 8.2 1.5 5.5 0.05 4.5 2.0 0.05 30 12.0 0.30
Orientation Table
1.4 7.5 0.10 2.25 2.0 0.10 16.0 0.30
1.5 7.5 0.10 3.29 2.0 0.10 16.0 0.30 Refer to 16mm Device Tape
16mm 12.1 40
1.5 7.5 0.10 3.70 2.0 0.10 16.0 0.30 Orientation Table
1.5 7.5 0.05 2.89 2.0 0.05 16.0 0.2
Refer to 24mm Device Tape
24mm 20.1 1.5 11.5 0.10 6.5 2.0 0.10 50 24.0 0.30
Orientation Table
P
Tape Size 2.0 0.05 4.0 0.10 8.0 0.10 12.0 0.10 16.0 0.10
SOT563 (-7B)
SOT953/SOT963
SOD923
All other packages
DFN0603, DFN0606
using 8mm tape in the
8mm DFN0806, DFN0808
Device Orientation
DFN1006 (-7B)
tables
WLB1006
WLB1406
WLCUS0603
All other packages using
12mm SMA, MELF, DFN5020 12mm tape in the Device
Orientation tables
All packages using 16mm
16mm DF-S
tape except DF-S
24mm D2PAK; TO263
40.40mm POWERDI5SP
POWERDI5SP-B
Notes: 1. Ao Bo Ko are determined by component size. The clearance between the component and the cavity must comply to the rotational and lateral movement
requirement provided in figures on page 14.
2. Applies to components 2.0mm x 1.2mm or larger.
3. Applies to components smaller than 2.0mm x 1.2mm.
P0 P2 D
B0 A0
F
W
1.00
1.90
0.60
Note: P, P0, P2, D, E, F and W dimensions are the same as provided in the EMBOSSED CARRIER TAPE DIMENSIONS table.
φ
Tape Maximum
Width (mm) Rotation (φ )
A0
8,12 20
16-200 10 Tape Maximum
Width (mm) Rotation (φ )
8,12 20
16-56 10
Typical Component Centerline 72-200 5
B0
Bending Radius
Embossed See Note 1
Carrier
Cavity
Di
re
ct
io
n
of
fe
ed
100mm
1mm Max.
Tape
1mm Max.
250mm
Notes: 1. Tape and components shall pass around radius ‘R’ without damage.
B* C
A D* N
Full Radius
G (measured at hub)
* Drive spokes optional. If used,
dimensions with asterisks apply.
A B* D* N T
Tape Size C G
Max Max Max Min Max
2.0 +0.5 13 +0.5 8.4 +2.0
330 2 20.5 0.2 100 2 14.4
-0 -0.2 -0.0
8mm
2.0 +0.5 13 +0.5 8.4 +1.5
178 2 20.5 0.2 55 5 14.4
-0 -0.2 -0.0
2.0+0.5 13 +0.5 12.4 +2.0
330 2 20.5 0.2 100 2 18.4
-0 -0.2 -0.0
12mm
2.0 +0.5 13 +0.5 12.4 +2.0
178 2 20.5 0.2 55 5 18.4
-0 -0.2 -0.0
2.0 +0.5 13 +0.5 16.4 +2.0
16mm 330 2 20.5 0.2 100 2 22.4
-0 -0.2 -0.0
2.0 +0.5 13 +0.5 24.4 +2.0
24mm 330 2 20.5 0.2 100 2 30.4
-0 -0.2 -0.0
Start
No Components* Components
Min. 160mm 2 Min. 390mm 1
Notes: 1. There shall be a leader of 230mm [9.05 inches] minimum which may consist of carrier and/or cover tape or a start tape followed by a
minimum of 160mm [6.30 inches] of empty carrier tape sealed with cover tape.
2. There shall be a trailer of 160mm [6.30 inches] minimum of empty carrier tape sealed with cover tape. The entire carrier tape must
release from the reel hub as the last portion of the tape unwinds from the reel without damage to the carrier tape and the
remaining components in the cavities.