Professional Documents
Culture Documents
Manual Usuario Part 1 Meteonorm PDF
Manual Usuario Part 1 Meteonorm PDF
Imprint
Publisher METEOTEST
Fabrikstrasse 14
CH-3012 Bern
Switzerland
sales@meteonorm.com
www.meteotest.com, www.meteonorm.com
Tel. +41 (0)31 307 26 26, Fax +41 (0)31 307 26 10
Authors METEOTEST:
Jan Remund,
Stefan Müller,
Stefan Kunz,
Christoph Schilter
Computer program meteonorm Version 7.x for personal computer under Windows
XP/Vista/7.
Contents
PART I: REVIEW AND SOFTWARE
1 Short Review
What is meteonorm?
meteonorm is a comprehensive climatological database for solar energy applications:
meteonorm is primarily a method for the calculation of solar radiation on arbitrarily orientated
surfaces at any desired location. The method is based on databases and algorithms coupled ac-
cording to a predetermined scheme. It commences with the user specifying a particular location for
which meteorological data are required, and terminates with the delivery of data of the desired struc-
ture and in the required format.
Depending on user requirements, the calculation procedure employs between one and four computa-
tion models (Tab. 1.1). In addition to the monthly values, meteonorm provides maximum radiation
values under clear sky conditions. For Switzerland, standardized data (design reference years) for
building simulation purposes are available for a number of locations.
Short Review 2 meteonorm
Tab. 1.1: Sequence in which the computational models are coupled in generating hourly radiation
data on an arbitrarily orientated surface at a site for which no measurements are availa-
ble.
- Models:
- Enhanced interpolation models to calculate mean values for any site in the world
- Additional models for calculation of diffuse and direct radiation.
- Enhanced temperature and humidity generation for building simulation (including extreme
events).
- Uncertainty, variability and trend information of yearly values of radiation and temperature for
any site.
- Software:
- Total redesign of software and graphical user interface: e.g. new high resolution map tool, easi-
er activation of the software with a license key.
- Update of the data import interface for user defined data (including current data by internet).
- Effects of high horizon considered in radiation calculations. High horizon calculated automatical-
ly for all regions worldwide.
- Calculation of panel reflections.
- Update of the English user manual, maps and illustrations included.
- New output formats added: IBK-CCM, Solinvest.
• Climatic variations:
The meteonorm radiation data base is based on 20 year measurement periods, the other meteoro-
logical parameters mainly on 1961–1990 and 2000–2009 means. Comparisons with longer term
measurements show that the discrepancy in average total radiation due to choice of time period is
less than 2–3% (rmse) for all weather stations.
• Computational models:
The models used in meteonorm are designed to calculate radiation on inclined surfaces and addi-
tional meteorological parameters. One or more models are used depending on data basis. If the
results are to be passed on to another software, the data basis and models used should be speci-
fied to ensure that the results are correctly interpreted.
• In general, the hourly model tends to slightly overestimate the total radiation on inclined surfaces
by 0–3% (depending on the model). The discrepancy compared to measured values is ±10% for
individual months and ±6% for yearly sums.
It is important for users of meteonorm to be aware that the data basis and computational models only
approximate the real situation. Notwithstanding this, the mean variation in measured total radiation
between one year and another is greater than the inaccuracy in the models.
Software Description 4 meteonorm
2 Software Description
2.2 Installation
The installation package for the software can be downloaded from the internet at
www.meteonorm.com/download/software. The file downloaded is an easy-to-use installation package.
Run the downloaded file and follow the instructions given.
To install and run the program, a personal computer with Windows XP/Vista/7 is required. 800 MB of
storage space is required on the hard disk. At least 512 MB RAM is needed. If not present, the .NET
framework 4.0 (freely available from microsoft.com) will be installed automatically. A screen resolution
of at least 1024x800 pixels is recommended. An internet connection is required for license checking.
The license conditions must be read prior to installation. See chapter 2.1 where to find them.
If required, the directory can be changed. Additionally software specific as well as personal configura-
tion files are stored in the user's configuration directory, e.g.:
c:\Users\<username>\AppData\Roaming\Meteotest\meteonorm7\
The meteonorm7.exe file and several files are contained in the mn7 directory. The program is started
with the meteonorm7.exe file or with an entry in the start list provided by the installation program.
The operating language of the program is English (default), but this can be changed during program
operation (see 2.2.3). Help is only available in English.
After installation the software runs in demo mode which has restrictions in saving data files. For full
usage of the software a license key is required.
2. Enter your license key (16 character long string) to register and obtain full software usage. En-
ter your personal information for a quicker identification in case you have support questions
and click ok.
3. You will be informed by a popup window on the success of the activation process. Push the
Start button for working with meteonorm.
In case the license is already activated on another machine, the license has to be revoked there first.
Your license will be deactivated and meteonorm will restart in demo mode.
In case your license cannot be revoked due to a computer crash, contact support@meteonorm.com to
deactivate your license manually.
• User options:
o Default output directory: Directory where per default the results are written to.
o Use online maps: Select to use higher resolved MapQuest tiles from the internet
whenever possible.
• Application options:
o Proxy server: Set your proxy server settings if a proxy server is used in your local ar-
ea network.
Software Description 7 meteonorm
1. Locations form: Select San Diego from the "Available locations" list in the "Locations" tab on the
right side of the application window. You can search the list by typing "San Diego" in the search
bar above the station list. Add the location to the list of selected locations on the left side of the
window by clicking on the green plus sign on the right of the station name or by double-clicking the
entry.
Press the Next button on the bottom right to move to the next page.
2. Modifications form: Enter the plane orientation by typing 45° in the inclination box, and leave the
azimuth at 0° (due south) to set the right orientation.
4. Output Format form: Choose output format Standard. The meteonorm standard output file con-
tains the global radiation, diffuse radiation, global radiation inclined, diffuse radiation inclined, di-
rect normal radiation and air temperature.
5. Output: The calculation takes about 2 to 10 seconds. The monthly values are first interpolated,
then the hourly global horizontal radiation values and the temperature are calculated, and finally
the radiation on the inclined surface is calculated. The results are shown in the display. The
monthly average values of the resulting parameters can be displayed with the View results from all
locations button and saved as a PDF document.
Software Description 10 meteonorm
6. By pressing the Save all results on disk button you can store the values. In the opening dialog box
select the time format of the data Month for monthly values, Day for daily values or Hour for Hourly
values.
In a second step, a stochastic weather generator runs on the interpolated monthly data to generate a
typical mean year of data in hourly resolution (8'760 values per parameter) for most of the output for-
mats. Some of the output formats even require a minute-by-minute time resolution.
Software Description 11 meteonorm
2.3.2.1 Introduction
To obtain a result, a user has to consecutively go through the following five steps:
1. Locations: Select the locations for which you want to run meteonorm.
Basically, there are seven different site types for locations defined: Interpolated cities, weather sta-
tions, weather stations without global radiation measurement (that means global radiation is interpo-
lated for them), design reference years (DRYs), user-defined sites, sites with imported monthly values
(User (month)) and sites with imported hourly values (User (hour)). Worldwide, cities with more than
100'000 habitants – and for Switzerland all 3'020 municipalities – are included.
To have meteonorm calculate meteorological data, the question of which data basis to use arises. Do
you have your own data, should one of meteonorm's built-in sites be used, or should an interpolation
based on the nearest meteonorm sites be used?
The fixed database in meteonorm 7 contains approx. 6'200 cities, 8'300 weather stations and 1'200
DRY (Design Reference Year) sites. For weather stations, monthly average values are stored. Should
you require hourly values, these are generated accordingly. For cities, the monthly average values
(long term averages) are interpolated and then the hourly values generated. For other sites, the
monthly values are likewise interpolated and hourly values generated. If you choose a DRY site, the
stored hourly data will automatically be read in and used in the calculations.
If your project is near a weather station, this station can be used directly. The distance between your
location and the nearest weather station should not be more than 20 km, and the altitudes should not
differ by more than 100 m. When a weather station is selected, its data is used in the calculations.
Software Description 12 meteonorm
If your project lies far from the next city or weather station included in meteonorm, it is recommended
to define a user defined site (form Available Locations – Tab User defined – button Add new...) so that
data from nearby weather stations are interpolated.
The Location selection window is divided into two parts. To the left you can see the list of your select-
ed locations and to the right the list of selectable locations, divided into three tabs.
• The Favorites tab is a list of the locations you marked as your personal favorites. This is
shown per default on starting up if it is not empty.
• The Locations tab lists all the pre-defined locations. Weather stations as well as interpolated
cities and Design Reference Years are mixed. You can search over the search bar for certain
location names. With the filter button, you can filter the list by station types and continent.
For each location, a short description of the location is displayed: The name and the site type
on the left side, the coordinates and weather parameters available for either the old and the
newer period as green and red squares in the center (move your mouse over the colored
squares to see the tool tip for an explanation) and on the right side the selection toolbox.
• The User defined tab lists your own added stations. You can add new locations by clicking the
Add new... button. Details for defining a new site are given in the section "Defining a user de-
fined site" below.
The selection toolbox contains four buttons. The globe sign on top left opens the map tool
and a map centered to the coordinates of the location is displayed. With the green plus sign
on the top right you can select the location for your calculations. The location will be added
to the list of selected locations on the left side of the window where the green plus sign is
turned into a red cross for removing the station out of the selected location list. You can also select
and deselect locations by double clicking. When pressing the information button on the bottom left a
window with location specific information will pop up. The greyed star on the bottom right adds the
location to your favorites. The color of the star will change to yellow when the location is included in
your favorite list.
In addition to the lists, all sites may also be chosen on a World Map. This is accessed
with the Map icon on top right of the Locations window. To zoom in and out you can either
use the buttons at the bottom of the window or using the mouse wheel. Pan the map by
clicking and dragging. Locations are marked as colored dots on the map. They can be switched on
and off with the check boxes on the left side under location types.
Software Description 13 meteonorm
More information about a location is displayed when clicking on a location dot in the map. You will see
the same type of location bar as in the list of available locations. You can then directly select a location
for your calculation or view details with the available buttons.
In the center of the map you can see a red cross. To define a new User
defined location click on the Create new location button. The coordinates
for the new location will be taken from the position of the red cross. In the
window opening enter a name for the location, the altitude and time zone. See the subsection "Defin-
ing a User defined site" below for further instructions.
Software Description 14 meteonorm
• name of site
• coordinates (as longitude, latitude in decimal degrees)
• altitude
If altitude is left empty, meteonorm will retrieve the information from its digital terrain model. Specifica-
tion of time zone, terrain (situation) and time reference are optional. Default values are used if omitted.
The default value for the time zone is that of the corresponding country (defined in a 1° grid). For Cen-
tral European Time (CET), it is +1. The sign of the time zone matches the general standards. Daylight
saving time is ignored.
The time reference in minutes specifies the difference between the center of the interval and the full
hour. The default value is -30. This means that the current full hour designates the end of the interval.
For example, 14:00 hours designates the time interval 13:00–14:00 hours. The time reference is ex-
plained in detail in the meteonorm Theory Manual in chapter 6.
The default value for the location situation (i.e. the surrounding terrain) is open situation. In the section
Situation, this can be changed. The specification of the situation is central to the interpolation and
generation procedure, and must be very carefully considered. There are 14 types of situations from
which to choose (Tab. 2.3.1). They are classified according to the local surroundings as shown in Fig-
ure 2.3.1 and Tab. 2.3.1.
Terrain Features
Open Open site, open terrain, north facing incline, no raised skyline. Applies to most sites.
Depression Depression or very flat valley floor, in which cold air collects, (e.g. in Switzerland particularly in
the Jura and the Alps).
Cold hollow Extensively cold hollows.
Sea/lake Shore of sea or larger lake (up to 1 km from the shore).
City Centre of larger city (over 100’000 inhabitants).
S incline South facing incline (above approx. 10° inclination, facing between SE–S–SW). At least 200 m
above valley floor.
W/E incline West or east facing incline (exceeding approx. 10° inclination, facing between SW–W–NW or
NE–E–SE). At least 200 m above valley floor.
Valley Valley floor in mountainous valley at higher altitudes. Valley floor inclined (flat valleys are often
treated as depressions).
Valley Central Floor of large central Alpine valley (e.g. Alpine regions of Valais, Switzerland).
Alps
Föhn valley Valley floor of Föhn valley (regions with warm descending air currents).
Valley Alpine Valley floor in northern Alpine foothills.
foothills
S valley side South facing incline (exceeding approx. 10° inclination, facing between SE–S–SW) up to 200
m above valley.
W/E valley side West or east facing incline (exceeding approx. 10° inclination, facing between SW–W–NW or
NE–E–SE) up to 200 m above valley floor.
Summit Open summit above 500 m. Overlooking surroundings in all directions.
Software Description 16 meteonorm
Summit
S N City Depression
E
Lake
General
Corrections of global radiation measurements
This point affects only a few stations in deep valleys in the Swiss Alps where measurements are highly
influenced by high horizons. The data is corrected as if there is no horizon line. This setting is only
available if one of these stations is selected.
Location specific
Plane orientation
Here you can set the orientation and inclination of your solar panel for the calculations of the radiation
components on the inclined plane.
Software Description 18 meteonorm
• The azimuth is the angle between the horizontal projection of the normal to the surface and
due south. The azimuth angle is defined as follows: 0° = South / 90° = West / -90° = East /
180° = North.
• The inclination angle is the angle between the surface and the horizontal plane, and ranges
from 0° to 90° (0° = horizontal, 90° = vertical).
Albedo
The albedo can be set to a user defined value (Custom). The albedo is the part of the shortwave ra-
diation that is reflected by the ground. It normally lies between 0.1 and 0.8 (mean values of grass are
0.15–0.2). Use the slider or enter the value directly in the input field.
If the albedo is not set by the user (selection Automatic), it is calculated using a temperature depend-
ent model (see meteonorm Theory Manual 6.7.2). This model takes the snow coverage into account.
This will cause the albedo value to be variable between winter (if there is snow) and summer.
Horizon
In meteonorm the influence of the horizon profile on the monthly and hourly values is taken into ac-
count. Should the horizon (for the Northern Hemisphere) be raised above 10° in the directions NE
through S to NW, a noticeable reduction in average monthly radiation occurs. For hourly values, a
relatively little elevated horizon may already have a strong influence on individual values. For these
reasons it is important to consider the effects of a raised horizon.
• None: Do not use a horizon line at all. The terrain is assumed to be flat and no shading is tak-
en into consideration.
• Automatic (topographic): Use the topographic horizon line from the meteonorm server. This
requires a working internet connection. The software searches for the horizon line served by
an internet horizon server provided by METEOTEST. This online horizon information is provid-
ed for all regions of the world between 60°N and 60°S using a 90 m digital terrain model. The
coverage is visualized on http://meteonorm.com/download/horizon/.
• Use custom: Use a horizon line edited with the horizon editor.
The button Edit horizon... will open the horizon editor which allows
drawing your personal horizon line.
Software Description 19 meteonorm
The horizon editor allows modifying the horizon line according to the local neighborhood. The green
area at the bottom shows the horizon of the surrounding landscape retrieved from the horizon server.
The topographical horizon can be calculated for all regions of the world between 60°N and 60°S using
a 90 m digital terrain model. This normally gives quite a good approximation of the horizon line. If the
horizon is very near (e.g. the site is on a slope) the horizon is shown as blocks. The thick red line
shows the final horizon line which is a mixture of the topographical horizon and the custom horizon.
The topographical horizon is used as a base horizon line. With left mouse clicks you can add the cus-
tom horizon line from additional nearby objects like buildings or trees. Points are marked as black
squares. Remove points with right mouse clicks or by dragging the points out of the window. In the
example above, a skyscraper in the neighborhood is added to the topographical horizon.
• Background image: If you have a 360° image of the surrounding of your location e.g. made
with meteonorm horicatcher1, geological compass, theodolite or fish-eye camera, you can
load this image into the editor as a background image for more precise digitizing of the horizon
line. The image can be imported in jpg or png format. The image must stretch from N to W, S,
E to N again (azimuth from +180° to -180°) and from 0° to 90° elevation.
• Display: A legend of the different colored lines in the image is given. Checkboxes are used to
switch on/off the topographical horizon, to display the sun paths for winter solstice,
spring/autumn and summer solstice and to display the reflections of a solar panel according to
the plane orientation.
• Horizon: You can load a horizon line from a previously stored *.hor file. You can save the
horizon line as a *.hor file. The data are stored with a 1° resolution. The button Remove cus-
tom horizon will delete the custom set points. The topographical horizon remains.
• The opacity slider changes the transparency of the green topography layer.
1
see http://www.meteonorm.com/products/meteonorm-horicatcher/
Software Description 20 meteonorm
For fixed hourly output formats (DOE, TMY2, TRY etc.), the global radiation is corrected for the hori-
zon profile (e.g. the selected raised horizon is included in the calculation) and written to the output. For
standard and user-defined output formats, radiation on inclined planes (Gk and Dk) is corrected for
horizon profile, but not radiation on the horizontal plane (Gh and Dh). Gh and Dh are calculated with
an astronomical horizon and written unmodified to the output.
Horizon Example
In the example below we have drawn the topographical horizon plus two objects in the nearby neigh-
borhood. We have a setup of a solar panel oriented -40° azimuthal and 20° inclined. The sun paths
show us that we have shading from object 1 in the early morning hours in summer and shading from
object 2 at noon in winter. In spring and autumn we will have reflections from the panel at object 1 in
the afternoon.
Atmospheric turbidity
The part of the solar radiation reaching the ground is influenced by the turbidity of the atmosphere.
meteonorm uses the concept of the Linke turbidity factor. Turbidity information in meteonorm is based
on a mixture of satellite data from the satellite experiments MISR and MODIS and ground station
measurements from Aeronet. More theoretical details about the turbidity are described in the mete-
onorm Theory Manual in chapter 6.5.3.
The selection can be made whether to use the interpolated satellite data (default) from meteonorm,
from the nearest Aeronet station (ground data) or to use user modified values.
Software Description 21 meteonorm
The button Edit turbidity... opens the turbidity editor which allows enter-
ing your own turbidity values.
• Monthly values: Choose between three datasets of monthly values. The selected one will be
marked in orange in the value table on the right side. Interpolated interpolates the values from
the meteonorm turbidity climatology. Aeronet is from a ground station network. The nearest
site is shown by following the red arrow in the image above. Custom lets you enter your per-
sonal values.
• Daily values: Select 'Variable (default)' for variable values on a daily basis. To hold them con-
stant throughout the month select 'Constant'.
Data import
• Import of current monthly values for a specific year through the meteonorm data web-
service. Hourly values will be generated from these by meteonorm.
• You can enter your own monthly values and make a simulation with them. This is described
in more detail in chapter 2.4.
• Import of your own hourly values. You can import your hourly values. They will be passed
through the meteonorm processor. Additional parameters will be added by meteonorm if
needed depending on the output format. This is described in more detail in chapter 2.4.
• add additional monthly values to the database. These monthly values can also be used for in-
terpolation if the location has been defined as a User (month) site.
Software Description 22 meteonorm
• do calculations on inclined planes if you only have global radiation horizontal values
Current monthly data can be imported automatically. By pressing the button Current data, the period
can be entered (1–12 months) and the data (radiation and temperature, for Switzerland also tempera-
ture distributions) is downloaded automatically from a server operated by METEOTEST. Data is always
interpolated. The data exists from 1998 onwards. Data will be available approx. 2 weeks after the end
of each month.
Example
2. Select the start of your desired year. In the example April 2011 is selected which will retrieve
4. The table will be filled with values. On the right you will see information about the data quality.
Fig 2.: Import of current monthly values for one whole year by internet. Set the starting month and
push the button 'Download'.
Basic Settings
In the basic settings you can define which data basis and which time period will be used for the calcu-
lations.
Dataset
The dataset field (in orange) specifies whether to use the meteonorm 7 climate database or to use the
imported data from the data import in the modification part in the step before. When selecting Use
imported data neither the provided time periods nor a future scenario can be chosen.
Software Description 24 meteonorm
The time period can be chosen on one hand for the radiation parameters (radiation) and on the other
hand for temperature and all the other parameters. Two climatological time periods are available for
both groups as well as a future time period for a climate change scenario:
• Temperature (and all other parameters except for radiation): 1961–1990 and 2000–2009
• Radiation: 1981–1990, 1986–2005
• Future: By selecting Future the field IPCC Scenario for future time periods is activated. There you
can choose between different scenario types which affect the climate differently. More details
about this topic are given in chapter 3.2 Climate change data.
The 2000–2009 period for temperature and the 1986–2005 period for radiation depict the periods most
commonly used. At some stations, the periods can differ from these standard periods. By opening the
information window of a weather station in the Locations part you can see which data is available and
from which period it is. For Cities or User defined sites the radiation period of cannot be chosen. The
radiation values are pre-interpolated for these sites. For this interpolation a database including global
radiation measurements of all time periods is used.
Advanced settings
Advanced settings are intended for more experienced users, as they allow changing the standard
setting by selecting different radiation models or other specific settings. By changing the defaults the
green dot on the button "Advanced settings" changes to yellow. By pushing the Reset button all set-
tings in the Data step are reset to their default.
Radiation model
• Default (hour). Hourly values for one typical year are generated. The chain of algorithms from
(Remund, 2008) is used. See chapter 6.8.1 in the theory manual for details.
• Minute (Aguiar & Collares-Pereira). Minute values for one year are generated according the
TAG model. See chapter 6.8.1 in the theory manual for details.
• Minute (Skartveith & Olseth). Minute values for one year are generated according Skartveith and
Olseth (1991). See chapter 6.8.1 in the theory manual for details.
• Clear sky radiation: Calculation of maximum global radiation and corresponding diffuse radiation
for clear days (cloudless sky) at hourly intervals. This affects the automatic selection of the clear
day temperature model (warmest possible temperature).
• Monthly variation: This will produce a more variable year instead of a typical mean year. The
monthly values are not the mean of the selected climatological period but are varied between the
climatological extreme boundaries.
• 10 years: This will generate 10 single years of the 'monthly variation' type. 10 files are written to
the output (10 x 8760 values).
For minute data only the special output format "Standard Minute" and "PVScout" will be available in
the settings of the Output step. Only the radiation parameters are generated in minute resolution. The
other parameters will be generated in hourly resolution.
You have the choice between two models for the calculations of the diffuse and direct part of the ra-
diation. See the theory manual for further details.
• Perez (default): This is the standard model which was already used in meteonorm version 6.
(Perez, 1991)
• Boland/Ridley/Lauret (BRL): Added in version 7.0. (Ridley, 2010)
Software Description 25 meteonorm
Temperature model
• Standard (hour): The default model for hourly temperature values produces hourly extremes,
which correspond to mean extreme values.
• 10 year extreme (hour): This model for hourly temperature values produces hourly extremes,
which correspond to 10 year hourly extreme values. This option will spread the distribution of val-
ues while the climatological mean remains the same. It is suited for simulations in which also ex-
tremely warm or cold values have to be considered (e.g. building simulations).
• Clear sky temperature: This model is selected automatically when the clear sky radiation model
is chosen and cannot be selected by the user himself.
The Perez model is the default model. Three further models are optionally available for the calculation
of radiation on tilted planes.
• Perez (1986): This is the default model. It delivers the most robust and best results for generated
time series.
• Hay’s model (1979): This delivers slightly better results for vertical surfaces than the Perez mod-
el.
• Skartveit and Olseth model (1986)
• Gueymard’s model (1987)
See chapter 6.7.2 for test results.
10 different first random numbers of the generation algorithm of hourly radiation can be chosen. By
changing this number, different time series of all meteorological parameters are generated due to a
different initialization of the stochastic process. The monthly means remain the same.
Time system
For the analysis of radiation and temperature extremes at the selected location there is the possibility
to simulate rare climate events. The option allows displaying the variations at a certain location.
• Summer/Winter allows selecting summer and winter periods specifically. With this function you
can produce e.g. a cold winter together with a hot summer which is a worst case scenario for heat-
ing and cooling simulations.
Extremes can be simulated for temperature and global radiation only.
For radiation the 10 year extreme monthly values of the 6 nearest measurement stations are interpo-
lated to obtain the extreme conditions for each location.
For temperature the extreme values are calculated using the standard deviation of the interpolated 6
nearest sites with such measurements. For the maximum values the standard deviations, multiplied by
the factor 1.28, are added to the mean, for the minimum values the standard deviations are subtract-
ed. The annual mean resulting this way does not correspond to any realistic value, because 12 ten
year extreme months are not probable to follow each other.
For the output format PHPP/WaVE the parameters for calculating the heating and cooling degree days
can be modified.
Heating loads:
• Number of cold days: equals the number of days in which a building cools down or is heated up.
• Critical temperature Outside: Above this outside daily mean temperature heating is not needed
any more.
• Average hours above: Number of hours to calculate minimum temperature to satisfy the comfort
criteria (e.g. 12 = 12-hours minimum is calculated)
Cooling loads:
• Number of hot days: Equals the number of days in which a building heats up (in summer).
• Critical temperature outside: Above this outside daily mean temperature cooling is needed.
• Night ventilation limits: Limitations of temperature and humidity to use night time cooling based
on ventilation.
Moving the mouse over a data format will activate a tool tip showing the parameters stored in this for-
mat. This is demonstrated in the image above. The tool tip first shows the time step the data is stored
in in brackets ([h]: hourly, [min]: minutely, [mon]: monthly) and then the list of the parameter abbrevia-
tions. Parameters and their abbreviations are described in detail in chapter 5.
If you choose the standard or the user-defined output, you are free to choose any desired surface
orientation. If you select a fixed format for a particular simulation software, the surface orientation and
also the units may be disabled, as these settings will be applied in the simulation software itself.
Tab. 2.3.2: Definition of designated meteonorm output formats: Number and sequence of parame-
ters. Symbols: y: year, m: month, dm: day in month, dy: day in year, h: hour, hy: hour in
year. The remaining symbols are defined in chapter 5.
Tab. 2.3.5: Definition of output formats for solar thermal simulation software.
*: For a horizontal surface, HGk, HDk and HBk are replaced by HBh, and GGk, GDk, GBk by GBh.
** Special parameters for TMY2/3 and Energy Plus (not calculated): LZ: Zenith Luminance; N1:
opaque sky cover (calculated with linear regression from N); Vis: Visibility, Hc: Ceiling Height;
Wc: Current Weather; Aod: Aerosol Optical Depth, Sn: Snow Depth; Ds: Days since last snow-
fall, lprec: liquid precipitation depth
**** www.solarschmiede.de
Software Description 30 meteonorm
You can define a data format yourself. You choose the parameters, units and the delimiter symbol
yourself. The user defined format is stored for later usage. The single format definition files are stored
as files with the extension *.muf in the folder
c:\Users\<username>\AppData\Roaming\Meteotest\meteonorm7\CustomFormats\.
In meteonorm version 6 the user defined formats were stored in files with the extension *.muf. These
*.muf files can be imported for usage in version 7.
The default units for radiation are [kWh/m²] for monthly values, and [W/m²] for hourly values. The de-
fault unit for the temperature is [°C]. If you subsequently select a fixed output format, the units will be
reverted to their fixed values. A header with four lines can be activated. The first line contains the
name of the site, the second line the latitude and longitude, height above sea level, time zone and
elevation and azimuth of the plane (if elevation is greater than 0°). The third line is blank, and the
fourth line contains the parameter headings.
Select
From the drop down list you can select one of your previously
defined data formats. Once you have selected a data format
from the list, you can edit it by clicking on the Edit button.
Create
To create a new data format click on the New button. A dia-
log window asks you to enter a name for your format. This
will become the filename and the name shown in the
dropdown list. A new window will open. You can select a
parameter by double clicking on it (or select and push the
green plus button ). This moves the parameter to the output box (highlighted with an orange border)
on the right hand side. To remove a parameter, double click on it in the output box (or select and click
the red cross button ).
Software Description 31 meteonorm
Delete
To delete a user defined format, select it from the drop down list, click Edit and then click the Delete
button ( ) at the bottom.
Standard/opt. calculates the optimal angle of panel inclination for the site. meteonorm evaluates the
optimal azimuth and inclination angle with the highest radiation income in steps of 5°.
PHPP/WaVE calculates the heating and cooling loads. Five different stochastic runs are carried out.
The calculation of design temperatures for cold and cloudy situations is based on the cloudiest period.
The design temperatures can be adopted statistically in order to correct the bias (which is recom-
mended as it reduces uncertainty). Beside a calculation based on long term monthly means, a worst
case calculation is also carried out. This calculation is based on 10 year extremes (cloudy, cold win-
ters and sunny, hot summers).
TMY3 includes aerosol information shown is based on the meteonorm turbidity information (also for
original DRY / TMY3 sites). Columns with uncertainties in this data format are reported for all sites
identically: 10% for global irradiation and 20% for beam irradiation. For the meteorological parameters
the flag E and the uncertainty level 8 is set.
Software Description 32 meteonorm
This software delivers its format specifications in form of a User defined format (*.muf file) included in
its software package distribution. This file needs to be imported for correct data output. Please follow
the instructions given by the user manual of LightTools.
For this software *.WEA (weather data files) files are required. There is a possibility to convert Ener-
gyPlus (*.epw) files into *.WEA files. Follow the instructions given by:
http://wiki.naturalfrequency.com/wiki/Converting_EnergyPlus_Weather_Data
eQuest
For data import into the software eQuest, use binary files generate in the DOE data format.
As a second option you can generate an EnergyPlus (epw) file and use the tool eQ_WthProc
(http://doe2.com/index_wth.html) from DOE to convert it to a DOE binary file. If you receive the error
message 'invalid floating point', it is related to the regional and language options from the Windows
operating system. Go to 'System settings' → 'Change date, time, number, currency value settings' →
Click the 'Customize this format' button → Set the decimal symbol to dot (.) and the digit grouping
symbol to comma (,).
Trane Trace
This software can import weather files in the TMY2 and TMY3 data format.
This software accepts the meteonorm standard output format and the EnergyPlus (epw) format.
EDSL Tas
On the left hand side of the window you can store your results by clicking the appropriate icons of the
selection toolbox. The magnifier icon will open the preview sheet which can be stored as a PDF file.
The graphs presented in the output part as well as a table with the monthly values are in-
cluded in the PDF. Additionally, the nearest sites (up to three sites with the distance to each
one of them) or the WMO number for weather stations which were used for the interpolation
are shown. Furthermore, information on the uncertainty of the yearly value for radiation and
temperature as well as the trend and the year to year variability of the global radiation is provided. The
floppy disk icon lets you store the data as ASCII files. You will be prompted for the time resolution to
store the data. The data is stored according to the data format selected in the format window. The
icons on the left hand side (green globe and information) show information (e.g. coordinates) about
the selected location.
The hourly files may contain very different parameters depending on the selected output format. The
parameters and the parameter order are shown in Tab. 2.3.2. Hourly files consist of 8'760 lines. Each
line contains the values for one hour.
The monthly files contain a table with the values and information about the setting used as well as
information about the nearest three stations used for the interpolation procedure and uncertainty in-
formation for radiation and temperature.
The measurement uncertainty (as part of the uncertainty model), the variability and trend information
is taken from the 6 nearest stations with long term measurements (subset of GEBA database with
approximately 800 stations). The same interpolation method as for the other meteorological parame-
ters is used (see chapter 6.2.1). Only results are given, if the nearest GEBA station is closer than 1500
km.
Software Description 34 meteonorm
meteonorm is tuned to the parameters global radiation and temperature. Do not make wind assess-
ments with meteonorm.
Tab. 2.4.1: Parameters for monthly data import. The timestamp (Month) is mandatory, all other pa-
rameters are optional.
Hourly data must be defined according to a predefined format. There are three different types of files
which can be read:
The Italian weather station format includes 11 header lines and the following parameters:
Year, month, day, day of year, hour, global radiation, temperature, relative humidity, precipitation,
pressure, wind direction, wind speed and longwave incoming radiation. All radiation parameters must
2
be in W/m , temperatures in °C, pressure in hPa and wind speed in m/s.
Free format
The parameters of the free format are specified in Table 2.4.2. Missing values are permitted and are to
be coded as -999. Data series covering less than a full year are also permitted. A two line header is
mandatory.
Tab. 2.4.2: Parameters for data import. The timestamp (m, dy or dm, h) is mandatory, all other pa-
rameters are optional. The parameters must be separated with tabulators. The abbrevia-
tions must be in the second line.
In the first header line the text "mn7 import file" must be written (with no additional tabulators). In the
second line the different parameter abbreviations have to be listed. The order of the parameters can
be chosen freely (make sure that header lines and values columns match).
The time definition used in the measurements have to be used in the definition of the site. The time is
defined with the two parameters time zone and time reference (see chapter 6.1 in the Theory Manual).
If the definitions do not match, meteonorm tries to correct time definition in order to let the data be
imported. If too many hours with global radiation at negative sun elevations or no global radiation with
positive sun elevations occur, the import is stopped.
The easiest way to examine the time definition of the measured values is to save standard output val-
ues for the same site (change the type to "User defined site") for clear sky radiation with different time
zones and time references and compare them to the measured time series e.g. in Excel.
Software Description 37 meteonorm
2.4.3 Examples
Example: hourly values import
For a project in Sidney, Australia, hourly values for a complete year are to be imported. The measured
data are from the Sydney weather station and were stored with normal time reference (Chap. 6.1), i.e.
the IZRM = -30, and the time refers to the end of the measurement interval. Using the measured glob-
al radiation data in [W/m²], the radiation on a vertical, north facing (!) surface is to be calculated.
1. Selection of site: The first step is to select the site within Sydney (Interpolated city).
2. Specification of surface: azimuth: -180°, inclination: 90°.
3. Select the hourly import file in the register "Modifications" with the button "Select hourly values file
…": The hourly example file to import can be found under Help / Example files: sydnhimp_mn7.txt.
4. Selection of output format: All output formats can be chosen. In this example the standard format
is ok.
5. Click on Next or the Output register to run the calculation.
6. Save the results as PDF ("show preview for this location") or ASCII files (monthly, daily or hourly
data).
Data Basis 38 meteonorm software
3 Data Basis
In this chapter the data basis of meteonorm is presented, the sites to which the models were adapted
and validated are listed, and the climatic classification system used for the generation of hourly values
is defined.
The Swiss database already used in the 1995 version 2 has been retained partly. This was compiled
by the MeteoSwiss and contains 10-year mean data for Gh, Ta, FF, DD and Sd for 64 weather sta-
tions for the period 1983–1992. These values can be accessed for these sites for radiation parame-
ters.
For worldwide applications, several different international databases are included. Global radiation
data was taken from the GEBA Global Energy Balance Archive (WMO World Climate Program - Wa-
ter) (Gilgen et al., 1998). The data was quality controlled using six separate procedures (checking of
physical probability, time series analysis and comparison of cloud data). Temperature, humidity, wind
data, sunshine duration and days with rain were taken from WMO Climatological Normals 1961–1990
(WMO, 1998). To replace missing data and ensure a homogeneous distribution of weather stations,
other databases such as the data summary of international weather stations compiled by the National
Climatic Data Center, USA (NCDC, 1995/2002) were added. For some stations in the USA, monthly
mean values 1961–1990 of global radiation of the National Renewable Energy Laboratory (NREL)
database "The Solar Radiation Data Manual For Buildings" were used.
• Swiss database (based on Swissmetnet of MeteoSwiss): The main period for radiation was ex-
tended to 1986–2005 for radiation and to 2000–2009 for temperature, wind and precipitation.
• Globalsod data (NCDC, 2002): The parameters temperature, wind speed (10 m above ground)
and precipitation were processed to 2000–2009 means.
• Turkish State Meteorological Service: 9 stations with global radiation from 2004–2010 were add-
ed.
• NREL: Monthly means of selected TMY3 sites (those within the lowest uncertainty class) were
added.
The monthly average radiation values were calculated for periods of at least 10 years. Although the
10-year periods differ between the stations, a uniform period was used for each continent (Tab. 3.1.1).
For some stations the data was extended with data from neighboring stations using a differential pro-
cedure. The database contains a total of 8'275 weather stations. Table 3.1.1 gives an overview of
the global distribution and the type of the weather stations.
Data Basis 39 meteonorm software
For most primary stations outside the USA, average values of temperature, humidity, wind and rainfall
are available for the measurement period 1961–1990. In the USA, average values of these parame-
ters are available for most weather stations for the period 1961–1990. All sites of type station (weather
stations without global radiation measurements) now have average values for the period 2000–2009
(in version 5.x: 1961–1990, 6.x: 1996–2005).
In addition to the monthly data, 1'020 DRY within the USA (tmy3 datasets based on 1991–2005 of
NREL), the 15 German "Testreferenzjahre" (of DWD) and 45 additional sites of sia ("Merkblatt 2028",
www.energycodes.ch) are included in meteonorm. The sia datasets correspond to the period 1984-
2003 and are based on EN ISO 15927-4. They can only be accessed with a special license (Add on:
"sia Merkblatt 2028", see www.meteonorm.com/order/). 25 TMY3 datasets are included in the soft-
ware. The rest can be downloaded from www.meteonorm.com/download/tmy3/.
The method used for processing the satellite images is an approximation of methods like Heliosat II
(Lefèvre et al., 2002): The 3 hourly pictures of the visible channel of the 5 geostationary satellites have
been used (period 2003–2005). The satellite pictures are processed to daily means of global radiation
and summed up to monthly values. These monthly values are interpolated with mean ground meas-
urements (mainly GEBA data). The difference between the ground measurements and satellite infor-
mation is interpolated spatially with the inverse distance method (see Chapter 6.2.1). This provides a
result which includes the values at the ground stations and the variation of the satellite pictures.
For Europe a high resolution (2–3 km) satellite map has been compiled by MeteoSwiss based on im-
ages from 2004–2010 of the visible and the infrared channel of Meteosat Second Generation satellite.
This data is included in meteonorm version 7.0
.
Data Basis 40 meteonorm software
Fig. 3.1.1: Map of yearly sum of global irradiation in kWh/m² based on satellite and ground infor-
mation. Means adapted mainly to the period 1986–2005.
The forecast changes of global radiation until 2100 with all scenarios are relatively small compared to
temperature changes. They are in the range of one tenth of a percent up to some percent. The differ-
ences between the three scenarios are also relatively small (Table 3.2.1 and Figure 3.2.1). In average,
the global radiation will slightly decrease. However, in the Mediterranean region the trend is positive (+
2–4 % until 2100). The changes of the last 25 years go in the same direction but are already bigger
than the forecasted anomalies for the period until 2030. However it has to be noted that the variations
in the past 50 years (global dimming and brightening) have been underestimated by the climate mod-
els in the past.
Tab. 3.2.1: Change of mean global radiation values in scenario A2. Yearly means 1981–2000 ac-
cording to meteonorm 6.1.
Fig. 3.2.1: Anomalies of global radiation in kWh/m² compared to 1961–1990 for the period 2080–
2099 with IPCC scenario A2.
It is important to be aware that predictions from climate models are always subject to uncertainty be-
cause of limitations on our knowledge on the climate system and the development of emissions and
on the computing resources available.
Data Basis 42 meteonorm software
V Tropical zones
IV, 1 Tropical rain climates
IV, 2 Tropical humid summer climates
IV, 3 Tropical humid winter climates
IV, 4 Tropical dry climates
IV, 5 Tropical desert or semi-arid climates
Data Basis 43 meteonorm software
The load zones are shown in the monthly output of the two output formats Meteo and sia 380/1.
Data Basis 44 meteonorm software
Note: As most computer programs do not provide for subscripts, there are two modes of representa-
tion for each variable. In the meteonorm program and most of the figures, the subscripts are repre-
sented by a suffix preceded by an underscore.
Example of variable representation:
G_Gh : Designates average hourly radiation intensity for global horizontal radiation.
H_Gh : Designates time integral of horizontal global radiation which corresponds to the en-
ergy absorbed.
Parameters and Units 48 METEONORM