Professional Documents
Culture Documents
API 570 Quiz - Recertification 2016 Nov
API 570 Quiz - Recertification 2016 Nov
A. MAWP
B. 90% of SMYS
C. ASME allowable stress
D. 150% of design
Question 3 of 25 Time Remaining: 236
Question: A complex listing and description of piping damage mechanisms experienced in the
refining industry is included in:
A. API RP 579
B. API RP 574
C. API RP 580
D. API RP 571
A. hydrogen-induced cracking
B. creep
C. caustic stress corrosion cracking
D. fatigue
Question 5 of 25 Time Remaining: 234
Question: A methodology whereby flaws and conditions contained within
piping systems are assessed in order to determine the structural integrity of
the piping for continued service is referred to as:
A. the owner/user
B. a repair organization
C. the holder of a valid r-stamp
D. the holder of a valid v-stamp
uestion 13 of 25 Time Remaining: 221
Question: Piping class 4 services are:
A. non-flammable
B. off-plot
C. located in tank farms and piperacks
D. water and steam only
A. API 577
B. API 579
C. API 578
D. API 580
Question 16 of 25 Time Remaining: 218
Question: An item that is not in accordance with specified codes, standards or other
requirements is known as:
A. defect.
B. out-of-compliance
C. non-conformance.
D. non-standard.
Question 17 of 25 Time Remaining: 217
Question: Which of the following standards provides guidance for the visual examination of
FRP components during initial manufacturing and assembly?
A. ASME B16.34
B. API Specification 5L
C. ASME B16-.20
D. ASTM D5263
Question 18 of 25 Time Remaining: 213
Question: According to API 570, when developing an inspection plan, the methods and extent
of NDE:
A. 2235
B. 2025
C. 579/581
D. 179/181
Question 20 of 25 Time Remaining: 210
Question: The potential for brittle fracture during pneumatic testing should be evaluated for
what type of steel, subject to temper embrittlement?
A. 1 1/4 Cr -1/2 Mo
B. Carbon steel
C. C - 1/2 Mo
D. 2 1/4 Cr - 1Mo
Question 21 of 25 Time Remaining: 208
Question: Piping systems not included within the plot boundary limits of a process unit is know
as:
A. off-site piping.
B. piperack piping.
C. tank farm piping.
D. off-plot piping
Question 22 of 25 Time Remaining: 207
Question: For high temperature thickness measurements, what is the most important component
of the thickness testing equipment?
A. to signal to the inspector that it is time for determining the minimum structural
thickness
B. to signal to the inspector that it is time for a remaining life assessment
C. to signal to the inspector that a fitness-for-service assessment is necessary
D. to signal to the inspector that it is time for determining the pressure minimum
thickness
Question 24 of 25 Time Remaining: 203
Question: How frequently should thickness measurements be conducted on class 4 piping
systems?
A. Every 15 years
B. Every 20 years
C. Option of owner/user
D. Every 10 years
Question 25 of 25 Time Remaining: 201
Question: According to API 570, guidance on the inspection of flanged joints can be found in:
A. API 579
B. API 571
C. ASME B31.3
D. ASME PCC-1
If you have not already done so, please submit your application. API staff will
process your application and will issue your recertification documents.