Professional Documents
Culture Documents
EnGenius Report
EnGenius Report
DHM
Prepare for
DHM
Prepare by
EnGenius
Location
Semarang
Report Date
November 7, 2018
Report Description
The following report is a network layout plan generated using the EnGenius ezWIFI
Planner. This tool analyzes your foor plan’s dimensions and features to determine an
optimized placement of access points for signal strength and range. This report can be
conveniently adjusted and recreated to take ongoing plan modifications into account.
The design proposal presented in this document is based upon the functional requirements and constraints specified by the customer above, in terms of how the network
shall be used and the physical environment in which the network shall operate. EnGenius
R bears no responsibility for verifying the accuracy or completeness of these
specifications. Additionally, this design is based on the assumption that there shall be no significant sources of external radio frequency (RF) interference on the 2.4 GHz or
5 GHz unlicensed bands from co-located and/or neighboring systems, either owned and operated by the customer or third parties.
If there are substantial deviations to the requirements or constraints as specified, or if substantial RF interference is present in the deployed environment, then the design
provided by EnGenius
R may not be appropriate or applicable.
DHM
Table of Contents
Executive Summary.................................................................................................... 1
Overview 1
Floor Plan Overview 2
Executive Summary
Overview
The ezWIFI Planner is simplifies the process of mapping out your network layout. By uploading a
copy of your foor plan, and using the online interface to add additional foor plan feature information,
the tool intelligently generates an optimized placement plan and visualization of your access points.
This layout proposal can be easily modified and re-generated to get a network plan most suited to
your needs.
Executive Summary 1
DHM
1 DHM SM 343.0 m2 3
Executive Summary 2
DHM
AP Locations
The tool auto-generates a proposed location for each of your access points, based on the number
of access points required. Placements are calculated to create an optimal coverage area across your
floor plan. Add additional access points for better coverage. (Figure 2)
Figure 2: AP Locations
Number of APs: 3
AP List
This list contains a comprehensive list of your network plan’s hardware requirements. Including
access point model numbers, radio band, channel information, and location of placement. (Table 2)
Table 2: AP List
Radio Channel
Name Model Name Mode Channel Power Location
Band Size
20.0
2.4G AP 1 20 MHz
1 AP-1 EWS350AP dBm
17.0
5.0G AP 149 20 MHz
dBm
11.0
2.4G AP 11 20 MHz
2 AP-2 EWS350AP dBm
17.0
5.0G AP 157 20 MHz
dBm
11.0
2.4G AP 6 20 MHz
3 AP-3 EWS350AP dBm
17.0
5.0G AP 153 20 MHz
dBm
Total APs: 3
Signal Coverage
Heatmaps helps you visualize the likely signal strength and coverage areas for your floor plan, based
on your project’s current constraints. Access point locations can be individually changed to generate
a new heatmap and visualize other suggested layout options. (Figure 3)
5G
WDS Link
The WDS Link predicts the likelihood that Wi-Fi signal strength will be sufficient between two specific
points on your floor plan, given your project’s requirements and current layout. Blue indicates that
your connection satisfies project needs, while red indicates that this signal strength is likely to be
inadequate. (Figure 4)
Figure 4: WDS
2.4G
5G