Professional Documents
Culture Documents
TLE MELCs Grade 7 PDF
TLE MELCs Grade 7 PDF
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
The learner demonstrates The learner independently uses LO 1. Identify caregiving tools, equipment, 1 WEEK TLE_HEUTCG7/8-
understanding on the use tools, equipment and and paraphernalia applicable to a specific 0a-b-1
of tools, equipment and paraphernalia in caregiving job
paraphernalia in 1.1 Classify equipment, tools, and
caregiving. paraphernalia according to types, and
functions
The learner demonstrates The learner independently LO 1. Identify hazards and risks 1 WEEK TLE_HECGOS7/8-
understanding on the practices occupational health and 1.1 Identify hazards and risks 0h-5
practice of occupational safety procedures in caregiving. 1.2 Determine hazard and risks indicators
health and safety in the workplace
procedures in caregiving. 1.3 Determine the effects of hazards
416
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG Code
The learner The learner independently uses LO 1. Identify sewing tools and equipment and 2 WEEKS TLE_HEDM7/8UT-
demonstrates tools in dressmaking/tailoring their uses 0a-b-1
understanding in the use 2.1 Identify sewing tools and equipment
of sewing tools in 2.2 Classify sewing machines
dressmaking 2.3 Select appropriate measuring tools
The learner The learner consistently LO 2. Clean and lubricate machine TLE_HEDM7/8BM-
demonstrates performs basic maintenance of 1 WEEK 0i-7
understanding in sewing machine in 1.1. Observe proper handling and cleaning of
performing basic dressmaking/tailoring. the machine
maintenance of sewing 1.2 Resolve common machine troubles
machine in 2.1 Follow the safety procedures in machine
dressmaking/tailoring. cleaning
2.2 Perform regular maintenance schedules
The learner The learner consistently LO 1. Identify and evaluate hazards and risks 1 WEEK TLE_HEDM7/8BM-
demonstrates practices occupational safety 0j-8
understanding in and health in 1.1. Explain workplace hazards and risks
practicing occupational dressmaking/tailoring. 1.2. Identify hazards and risks in the workplace
safety and health in 1.3. Explain the causes of hazards and risks
dressmaking/tailoring.
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG Code
The learners The learners independently LO 1. Utilize appropriate kitchen tools, equipment, 2 WEEKS TLE_HECK7/8UT-
demonstrate an use and maintain tools, and paraphernalia 0a-1
understanding the use equipment, and materials in 1.1 identify types of tools, equipment, and
and maintenance of cookery according to paraphernalia
equipment in cookery standard operating 1.2 classify the types of appropriate cleaning tools
procedures and equipment based on their uses
The learners The learners independently LO 1. Carry out measurements and calculations in 3 WEEKS TLE_HECK7/8PM-
demonstrate an measure and calculate a required task 0d-4
understanding ingredients in cookery 1.1 give the abbreviations and equivalents of
performing measurements
mensuration and 1.2 measure ingredients according to recipe
calculation in cookery requirement
1.3 convert systems of measurement according to
recipe requirement
1.4perform substitution of ingredients
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG Code
The learner The learner independently uses LO 1. Prepare the necessary tools and 1 WEEK TLE_HEBC7/8UT-
demonstrates nail care tools and equipment in equipment for the specific nail care activity 0a-b-1
understanding of the use Nail Care Servicing 1.1 Identify the uses of tools and equipment in
of tools and equipment nail care according to task requirements
in Nail Care Services. 1.2 Use tools and equipment according to task
requirement
1.3 Observe safety procedure of using tools and
equipment
The learner The learner independently LO 2. Perform basic preventive and corrective 2 WEEKs TLE_HEBC7/8MT-
demonstrates maintains tools and equipment maintenance 0d-e-3
understanding in in Nail Care Servicing 1.1 Clean tools according to standard
maintaining tools and procedures
equipment in Nail Care 1.2 Inspected defective tools and equipment
The learner The learner independently LO 1. Identify nail structure and shapes 4 WEEKS TLE_HEBC7/8MT-
demonstrates practice nail shapes in 1.1 Identify nail structure and shapes 0j-6
understanding in nail Nail Care Services 1.2 Perform nail trimmings to varied shapes
shapes in Nail Care
Services
420
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG Code
The learner The learner uses basic L.O. 1: Use basic tools in 2 WEEKS TLE_HEHD7/8EA-
demonstrates tools in embroider and embroidery 0a-b-1
understanding on the create 1.1 Basic tools and materials inembroidery are
principles embroidered article identified.
and concepts of 1.2Different embroidery stitches are
embroidery performed based on the given steps.
1.3 Proper use of tools is observed
LO2. Create embroidered article 2 WEEKS TLE_HEHD7/8EA-
2.1 Embroidered article is created based 0c-d-2
on the principles and elements of
design.
2.2 Color scheme are applied increating the
design.
2.3 Design is transferred following the given
steps.
2.4 Good working habits are observed
The learner The learner understands and LO 1. Understand Recycling 1 WEEK TLE_HEHD7/8RP-
demonstrates create recycled project 1. Recycled articles are identified based 0e-f-2
understanding on the on recyclable materials
principles
and concepts of
recycling
LO2. Create Recycled project TLE_HEHD7/8RP-
2.1 Recycled articles are produced 0e-g-3
artistically based on the given steps.
2.2 Tools are properly used.
2.3 Good working habits are observed.
The learner The learner understand LO1. Wrap Gift Items 2 WEEKS TLE_HEHD7/8WG-
demonstrates wrapping of gift items 1. Tools are properly used. 0h-i-2
understanding on the 2. Principles and elements of design are
principles applied.
421
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG Code
The learner The learner independently use USE TOOLS, EQUIPMENT, AND 1 WEEK TLE_HEFS7/8UT-
demonstrates tools, equipment, and PARAPHERNALIA 0ab-2
understanding on the paraphernalia in FOS LO 1. Identify FOS tools, equipment, and
use of tools, equipment, paraphernalia applicable to a specific job
and paraphernalia in FOS 1.1. classify equipment, tools, and
paraphernalia according to types and
functions
1.2. describe equipment, tools, and
paraphernalia based on the specified task
The learner The learner independently PERFORM MENSURATION AND 1 WEEKS TLE_HEFS7/8MC-
demonstrates perform calculations in FOS CALCULATIONS 0e-6
performing calculations LO 1. Perform simple calculations
in FOS 1.1. prepare simple report from arrival to
departure of customers
The learner The learner independently PRACTICE OCCUPATIONAL HEALTH AND 1 WEEK TLE_HEFS7/8OHS-
demonstrates the practice occupational health and SAFETY 0g-8
practice of occupational safety procedures in FOS in LO 1: Identify hazards and risks
health and safety accordance with standards 1.1. clarify and explain regulations and
procedures in FOS workplace safety and hazard control
practices and procedures
1.2. identify hazards/risks in the workplace and
their corresponding indicators
The learner The learner independently INTERPRET DESIGN AND LAYOUT 1 WEEK TLE_HEFS7/8ID-
demonstrates how to interpret layouts areas of front- LO 1. Read and interpret front-office reception 0j-12
interpret layout areas of office reception area
front-office reception 1.1. read and interpret symbols and layout in a
given sample plan for a front- office
reception area
1.2. describe parts and functions of a front-
office reception layout
1.3. evaluate a sample front office reception
layout
423
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG
COMPETENCIES Code
The learner demonstrates The learner uses and maintain LO 1. Select tools, equipment, utensils TLE_AFFP9-
understanding of uses and appropriate food (fish) and instruments 2 WEEKS 12UT- 0a-1
maintenance of food (fish) processing tools, equipment, 1.1. Select tools, equipment, utensils
processing tools, equipment, instruments and utensils and and instruments according to food
instruments and utensils in food reports accordingly upon (fish) processing method
(fish) processing. discovery of defect/s. 1.2. Explain the defects in tools,
equipment, utensils and
instrument
1.3. Follow procedures in reporting
defective tools, equipment,
utensils and instruments
TLE_AFFP9-
LO 2. Use tools, equipment instruments 12 UT-0b-2
and utensils by following the standard
procedures
2.1. Interpret a food processing
procedure
2.2. Apply standard procedures in
using tools, equipment,
instruments, and utensils
2.3. Calibrate tools, equipment
instruments and utensils
2.4. Follow procedures in sanitizing
tools, equipment, instruments and
utensils
2.5. Use tools, equipment,
instruments, and utensils
according to job requirements and
manufacture’s specification
424
The learner demonstrates The learner performs basic LO 1. Tabulate the recorded data TLE_AFFP9-
understanding of basic measurements and calculation relevant to production of processed 2 WEEKS 12MC-0d-1
measurements and calculation. that relate with weight and food
measurements. 1.1. Record weights and
measurements of raw materials
and ingredients
1.2. Summarize/sum up recorded
weights and measurements of
processed products
1.3. Perform how a seam is measured
The learner demonstrates The learner exhibits basic LO 3. Calculate the production inputs 1 WEEK TLE_AFFP9-
understanding of basic mathematical skills that relate and output 12MC-0e-3
mathematical skills that relate with computation of percentage 3.1. Compute for the percentage
with spoilage, rejects and the of spoilage, rejects and recovery equivalents of actual spoilage and
percentage of recovery of yields. of yields. rejects
3.2. Calculate the percentage of
actual yields and recoveries
according to enterprise
requirements
3.3. Record calculated data according
to enterprise requirements
The learner demonstrates The learner interprets plans and LO 1. Interpret a layout plan 1 WEEK TLE_AFFP9-
understanding of interpreting drawings that relate with basic 1.1. Explain the meanings of signs and 12ID-0f-1
plans and drawings that relate fish processing activities. symbol used in lay outing plan for
with basic fish processing fish processing activity
activities. 1.2. Interpret layout plan for fish
processing area according to
standard set
The learner demonstrates The learner observes basic LO 1. Observe personal hygiene and 1 WEEK TLE_AFFP9-
understanding of basic principles principles and rules to be good grooming 12OS-0g-1
and rules to be observed to ensure observed to ensure food safety 1.1. Explain the importance of good
food safety and sanitation when and sanitation when he/she grooming in a workplace
he/she packages fish products. packages fish products.
425
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG
COMPETENCIES Code
The learner demonstrates The learner demonstrates LO 1. Prepare equipment, tools, materials 1 WEEK TLE_AFFP9-
understanding on independently the procedures of and utensils 12SL-Ia-c-1
processing food by salting, processing food by salting, curing 1.1. Prepare Equipment and tools for
curing and smoking. and smoking. salting, curing and smoking in
accordance with manufacturer’s
specifications
1.2. Check, sanitize and calibrate
Equipment for the above food
processing methods in accordance
with manufacturer’s specifications
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG
Code
The learner demonstrates The learner independently LO 1. Prepare equipment, tools and utensils 1 WEEK TLE_AFFP9-
understanding food demonstrates procedures of 1.1. Select equipment, tools and utensils for 12FR-IIh-i
processing by fermentation fermentation and pickling. fermentation and pickling are according
and pickling. to requirements
427
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG
COMPETENCIES Code
The learner demonstrates The learner demonstrates LO 1. Prepare Equipment, Tools and 1 week TLE_AFFP9-
understanding on food independently the method of food Utensils 12SC-IVa-b-1
processing by sugar processing by sugar concentration. 1.1. Prepare equipment, tools and
concentration. utensils for preserving foods by
sugar concentration in accordance
with manufacturer’s manual
1.2. Calibrate equipment, tools and
429
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
1 WEEK TLE_IAMS7/8UT-
The learner demonstrates an The learner independently prepares LO 1. Prepare masonry materials 0a-1
understanding of concepts in appropriate masonry materials and and tools for the task
the preparation of materials tools using the different forms in tile 1.1 Prepare a list of masonry tools
and tools using the different setting based on industry standards. and materials for a specific job
forms in masonry.
TLE_IAMS7/8UT-
LO 2. Request appropriate masonry 0b-2
supplies materials and tools
applicable to a specific job
2.1 Use the appropriate form in
requesting for masonry tools,
supplies and materials for a
specific job
The learner demonstrates an The learner independently reads and LO 1. Analyze signs, masonry 1 WEEK TLE_IAMS7/8ID-
understanding of the interprets specifications of simple symbols and data 0c-1
concepts and underlying technical drawings and plans. 1.1 Read and interpret masonry
principles in interpreting signs, symbols and data
simple technical drawings
and plans in tile setting.
TLE_IAMS7/8ID-
LO 2. Interpret technical drawings 0d-2
and plans
431
1.1.3 Insulating
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
1 WEEK TLE_IACP7/8UT-
The learner demonstrates an The learner independently prepares LO 1. Identify materials and tools 0a-1
understanding of the carpentry tools and construction for a task
underlying principles in the materials based on industry 1.1 Describe tools and materials
preparation of carpentry standards. used in carpentry
tools and construction 1.2 Prepare tools and materials for
materials. a task
TLE_IACP7/8UT-
LO 2. Request appropriate 0b-2
materials and tools
433
TLE_IACP7/8MT-
LO 2. Perform basic preventive 0c-2
maintenance
2.1 Repair defective tools
2.2 Conduct preventive
maintenance of carpentry tools
1 WEEK TLE_IACP7/8MC-
The learner demonstrates an The learner independently performs LO 1. Select measuring instruments 0d-1
understanding of the accurate measurements and 1.1 Identify linear measuring
concepts and underlying calculation based on a given task. instrument appropriate for a
principles in performing given task
measurements and
calculations.
TLE_IACP7/8MC-
LO 2. Carry out measurements and 0d-e-2
calculations
2.1. Measure given materials
2.2. Calculate amount of materials
for a specific task
1 WEEK
The learner demonstrates an The learner independently reads and LO 1. Analyze signs, symbols and TLE_IACP7/8ID-
understanding of the interprets simple technical drawing data 0f-1
434
concepts in interpreting signs and symbols based on standard 1.1 Explain the importance of
technical drawing signs and specifications. signs, symbols and data in
symbols in carpentry. interpreting a work plan
1.2 Determine appropriate signs
and symbols needed in the
plan
1 WEEK
LO 2. Interpret technical drawings TLE_IACP7/8ID-
and plans 0f-2
2.1 Read working plan
2.2 Interpret working plan
1 WEEK
The learner demonstrates an The learner independently prepares LO 1. Identify hazards and risks TLE_IACP7/8ID-
understanding of the an occupational health and safety 1.1 List down the different health 0i-1
concepts of occupational checklist being applied in carpentry. hazards and risks found in the
health and safety workplace
procedures. 1.2 Discuss the effects of health
hazards and occupational risks
435
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
1 WEEK TLE_IAAW7/8UT-
The learner demonstrates The learner independently LO 1. Identify and select materials and 0a-1
an understanding of the prepares appropriate SMAW tools
preparation of SMAW materials and tools based on 1.1 Manipulate the tools and materials
materials and tools. industry standards. in a job/task
1 WEEK TLE_IAAW7/8MC-
The learner demonstrates The learner independently LO 1. Select measuring instruments 0d-1
an understanding of performs accurate measurements 1.1 Manipulate the measuring tool for a
concepts and underlying and calculation based on given specified task
principles in performing tasks.
measurements and
calculations.
TLE_IAAW7/8MC-
LO 2. Carry out measurements and 0d-e-2
calculations
2.1 Measure and calculate the
dimensions of a specific object
1 WEEK TLE_IAAW7/8OS-
The learner demonstrates The learner independently LO 2. Evaluate hazards and risks 0f-2
an understanding of the identifies hazards correctly in 2.1 Identify work hazards in the
concepts and underlying accordance with OHS procedures. workplace
principles in OHS
procedures.
O 3. Control hazards and risks TLE_IAAW7/8OS-
1.1 Demonstrate the use of PPEs in the 0g-3
workplace
436
The learner demonstrates The learner independently reads LO 1. Analyze signs, symbols and data 1 WEEK TLE_IAAW7/8ID-
an understanding of the and interprets simple technical 1.1 Determine appropriate welding 0i-j-1
concepts and underlying drawings. materials based on technical
principles in interpreting drawings
simple technical drawings
in SMAW.
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
The learner demonstrates The learner independently LO 1. Prepare plumbing materials and 1 WEEK TLE_IAPB7/8UT-
an understanding of prepares appropriate plumbing tools for the task 0a-1
concepts in the materials and tools using the 1.1 Prepare a list of plumbing tools and
preparation of plumbing different forms in electrical materials for a specific job
materials and tools using installation and maintenance
the different forms in based on industry standards.
electrical installation and
maintenance.
The learner demonstrates The learner independently reads LO 1. Analyze signs, plumbing symbols TLE_IAPB7/8ID-
an understanding of the and interprets specifications of and data 0e-1
concepts and underlying simple technical drawings and 1.1 Read and interpret plumbing signs,
principles in interpreting plans. symbols and data
simple technical drawings 1.2 Analyze plumbing components and
and plans in plumbing materials based on electrical signs,
installation and symbols and data
maintenance.
1 WEEK
The learner demonstrates The learner independently LO 2. Perform basic preventive TLE_IAPB7/8MT-
an understanding of the performs proper maintenance of maintenance 0g-2
concepts and underlying plumbing tools and equipment 1.1 Maintenance of tools is done
principles in the based on industry standards. regularly
maintenance of plumbing
tools and equipment.
manufacturer specifications or
standard operating procedure
1 WEEK
The learner demonstrates The learner independently LO 1. Identify hazards and risks TLE_IAPB7/8OS-
an understanding of the identifies hazards correctly in 1.1 Observing safety work habits in the 0i-1
concepts and underlying accordance with occupational work place
principles in occupational health and safety procedures. 1.2 Preventing hazards in the workplace
health and safety
procedures
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
1 WEEK
The learners demonstrate The learners shall be able to LO 1. Select Measuring Instrument
an understanding of perform mensuration and 1.1 Identify object or component to be
concepts and underlying calculation based on job measured
theories and principles in requirements 1.2 Obtain correct specifications from
performing measurements relevant source
and calculations 1.3 Select appropriate measuring
instrument as per job requirement
1 WEEK
LO 2. Carry out measurement and
calculation
440
1 WEEK
The learners demonstrate The learners shall be able to read LO 1. Identify and access manual/ TLE_IAMSES9-
an understanding of and interpret specification and specifications 12RIA-Ih-11
concepts and underlying manual 1.1 Identify and access appropriate
theories and principles in manuals as per job requirement
interpreting manuals of 1.2 Check version and date of manual to
specifications in ensure correct specification and
automotive servicing identify procedures
1 WEEK
LO 2. Interpret manuals TLE_IAMSES9-
12RIA-Ih-12
441
1 WEEK
The learners demonstrate The learners shall be able to LO 1. Inspect and clean tools, equipment TLE_IAMSES9-
an understanding of perform shop maintenance in and work area 12PSM-Ij-18
concepts and underlying accordance with OHS 1.1 Inspect and clean tools, equipment,
principles in performing (occupational health and safety) and work to ensure that they are free
shop maintenance procedures from dust, grease, and other
substances
1.2 Observe cleaning solvent used as per
workshop cleaning requirements
1.3 Check and clean work area
1.4 Keep dry wet surface or spot in the
work area
1 WEEK
The learners demonstrate The learners shall be able to LO 1. Interpret technical drawing TLE_IAAUTO9-
an understanding of interpret/execute technical 1.1 Recognize components and assemblies 12ITD-IVf-g-24
concepts and underlying drawing of objects
principles of 1.2 Recognize and interpret symbols
interpreting/drawing 1.3 Identify appropriate dimensions
technical drawings 1.4 Follow instructions
1.5 Identify required materials and other
consumables
1 WEEK
The learners demonstrate The learner shall be able to LO 1. Apply basic safety procedures TLE_IAAUTO9-
an understanding of perform job in practicing health, 1.1 Maintain policies and procedures to 12PHSE-Ia-c-
concepts and underlying safety, and environment achieve a safe working environment in 27
principles of practicing procedures line with OHS
health, safety, and 1.2 Report all unsafe situations according
environment procedures to worksite policy
1.3 Report all machinery and equipment
breakdown to supervisor and/or to
person in charge
443
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
The learner demonstrates The learner independently LO 1. Prepare electrical materials and TLE_IAEI7/8UT-
an understanding of the prepares appropriate electrical tools for the task 1 week 0a-1
concepts in the preparing materials and tools using the 1.1 Prepare a list of electrical tools and
electrical materials and different forms in electrical materials for a specific job
tools using the different installation and maintenance
forms in electrical based on industry standards.
installation and
maintenance.
The learner demonstrates The learner independently LO 1. Select electrical measuring tools 2 weeks TLE_IAEI7/8MC-
an understanding of the performs accurate measurements and instruments 0c-1
concepts and underlying and calculation based on given 1.1 Identify object or component to be
principles in performing tasks. measured
measurements and 1.2 Choose test instruments to be used
calculations. for specific tasks
LO 2. Carry out measurements and TLE_IAEI7/8MC-
calculations 0d-2
1.1 Use appropriate measuring devices
for specific tasks
1.2 Compute for required data
LO 1. Analyze signs, electrical symbols 1 week TLE_IAEI7/8ID-
and data 0e-1
1.1 Read and interpret electrical signs,
symbols and data
1.2 Analyze electrical components and
materials based on electrical signs,
symbols and data
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
The learners demonstrate The learners shall be able to apply LO 1. Assess quality of received materials TLE_IAEPAS9-
an understanding of the quality standards based on or components 1 week 12AQS-Ia-1
underlying principles in prescribed procedures and 1.1 Obtain work instructions in accordance
applying quality standards standards with standard operating procedures
based on prescribed 1.2 Carry out work in accordance with
procedures and standards standard operating procedures
1.3 Check received materials or
component parts against workplace
standards and specifications
1.4 Isolate faults and faulty materials
446
The learners demonstrate The learners shall be able to LO 1. Plan and prepare for task to be 1 week TLE_IAEPAS9-
an understanding of the perform computer operations undertaken 12PCO-Ic-d-4
underlying principles of based on the task assigned and 1.1 Determine requirements of task in
operation and required outcome accordance with job specifications
maintenance of a 1.2 Select appropriate hardware and
computer based on the software in accordance with task
task assigned and required assigned and required outcome
outcome
The learners demonstrate The learners shall be able to LO 1. Select measuring instrument TLE_IAEPAS9-
an understanding of the perform mensuration and 1.1 Identify object or component to be 1 week 12PMC-Ig-h-9
underlying principles in calculation in line with job measured
measurements and requirements 1.2 Obtain correct specifications from
calculations in line with job relevant source
requirements 1.3 Select measuring tools in line with job
requirements
simple technical drawings requirements and company 1.1 Select appropriate technical drawing
and electronics diagram procedures according to job requirements
according to job 1.2 Segregate technical drawings in
requirements and accordance with the types and kinds of
company procedures drawings
The learners demonstrate The learners shall be able to use LO 2. Prepare hand tools TLE_IAEPAS9-
an understanding of the and maintain hand tools based on 2.1 Check appropriate hand tools for 12UMHT-IIg-
underlying principles in the standard company procedures proper operation and safety 1 week 17
use and maintenance of 2.2 Mark unsafe or faulty tools for repair
electronic hand tools in accordance with standard company
based on standard procedure
company procedures
449
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
The learner demonstrates The learner independently LO 1. Prepare RAC materials and tools for TLE_IARA7/8UT-
an understanding of the prepares appropriate RAC the task 1 week 0a-1
concepts in the materials and tools using the 1.1 Prepare a list of electrical tools and
preparation of RAC different forms in RAC based on materials for a specific job
materials and tools using industry standards.
the different forms in
RAC.
The learner demonstrates The learner independently LO 1. Select electrical measuring tools TLE_IARA7/8MC-
an understanding of the performs accurate measurements and instruments 0c-1
concepts and underlying and calculation based on given 1.1 Identify object or component to be 1 week
principles in performing tasks. measured
measurements and 1.2 Choose measuring tools to be used
calculations. for specific tasks
1.3 Identify alternative measuring tools
without sacrificing cost and quality of
work
451
The learner demonstrates The learner independently reads LO 1. Analyze signs, RAC symbols and TLE_IARA7/8ID-
an understanding of the and interprets specifications of data 1 week 0e-1
concepts and underlying simple technical drawings and 1.1 Read and interpret RAC signs,
principles in interpreting plans. symbols and data
simple technical drawings 1.2 Analyze RAC components and
and plans in RAC. materials based on electrical signs,
symbols and data
1 week
The learner demonstrates The learner independently LO 1. Check condition of tools and TLE_IARA7/8MT-
an understanding of the performs proper maintenance of equipment 0g-1
underlying principles in RAC tools and equipment based 1.1 Label functional and non-functional
the maintenance of RAC on industry standards. tools and equipment
tools and equipment.
TLE_IARA7/8MT-
LO 2. Perform basic maintenance 1 week 0h-2
452
The learner demonstrates The learner independently LO 1. Identify hazards and risks 1 week TLE_IARA7/8OS-
an understanding of the simulates occupational health 1.1 List down hazards and risks in the 0i-1
concepts and underlying and safety procedures. workplace
principles of occupational
health and safety
procedures.
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
LESSON 1: USING AND MAINTAINING HAND TOOLS (UHT)
The learners The learners shall be able to use LO 1. Plan and prepare for tasks to be
demonstrate an hand tools and equipment for undertaken TLE_IACSS9-
understanding of the use computer systems servicing 1.1 Identify tasks to be undertaken 12UHT-IIIa-17
of hand tools and properly
equipment for computer 1.2 Identify and select appropriate hand
systems servicing tools according to the task
requirements
LO 2. Prepare hand tools TLE_IACSS9-
2.1 Check appropriate hand tools for 12UHT-IIIb-18
0 proper operation and safety
2.2 Identify and mark unsafe or faulty
tools for repair according to standard 1 Week
company procedure
TLE_IACSS9-
LO 3. Use appropriate hand tools and test 12UHT-IIIc-19
equipment
3.1 Use tools according to tasks
undertaken.
3.2 Observe all safety procedures in using
tools at all times and use appropriate
PPE
3.3 Report malfunctions, unplanned or
unusual events to the supervisor
TLE_IACSS9-
LO 4. Maintain hand tools 12UHT-IIId-20
4.1 Do not drop tools to avoid damage;
carry out routine maintenance of tools
according to standard operational
procedures, principles, and techniques
454
LO 2: Terminate/connect electrical
wiring/ electronic circuits TLE_IACSS9-
12TCEW-IIIg-
i-22
459
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
LESSON 1: USE OF TOOLS AND EQUIPMENT (UT)
` The learners The learners shall be able to use
LO 1. Prepare hand tools and equipment TLE_ICTTD7/8UT-
0 demonstrate an hand tools and equipment in
in technical drafting 0a-1
understanding of Technical Drafting 1.1 List hand tools and equipment based
hand tools and on job requirement 1 Week
equipment in Technical 1.2 Identify appropriate hand tools and
Drafting equipment
1.3 Classify hand tools and equipment
according to function and task
requirement
LESSON 2: MAINTAIN HAND TOOLS, DRAWING INSTRUMENTS, EQUIPMENT AND PARAPHERNALIA (MT)
462
The learners The learners shall be able to LO 1. Maintain hand tools, drawing TLE_ICTTD7/8MT-
demonstrate an maintain tools, drawing instruments, equipment, and 0b-1
understanding of instruments, equipment, and paraphernalia
concepts and principles paraphernalia 1.1 Perform safety procedures in
in maintaining hand maintaining hand tools, drawing
tools, drawing instruments, equipment, and
instruments, paraphernalia
equipment, and 1.2 Follow procedures in cleaning,
paraphernalia tightening and simple repair of hand 2 Weeks
0 tools, drawing instruments,
equipment, and paraphernalia
1.3 Identify common malfunction
(unplanned or unusual events) when
using tools, drawing instruments,
equipment, and paraphernalia
LO 2. Inspect hand tools, drawing TLE_ICTTD7/8MT-
instruments, equipment, and 0c-d-2
paraphernalia received in technical
drafting
2.1 Follow the standard procedures in
accomplishing forms
2.2 Check the list of hand tools, drawing
instruments, equipment, and
paraphernalia to be requested per
job requirement
2.3 Evaluate the condition of all the
requested hand tools, drawing
instruments, equipment, and
paraphernalia for proper operation
and safety
LO 3. Prepare an inspection report of TLE_ICTTD7/8MT-
the hand tools, drawing instruments, 0e-3
equipment, and paraphernalia received
in technical drafting
463
The learners The learners shall be able to LO 1. Analyze signs, symbols, and data TLE_ICTTD7/8TD-
demonstrate an read and interpret technical 1.1 Identify signs and symbols used in 0h-1
understanding of drawings and work plans technical drawing
concepts and principles accurately 1.2 Analyze data indicated in the
0 in interpreting technical technical drawing
drawings and work 2 Weeks
plans
464
The learners The learners shall be able to LO 1. Identify hazards and risks TLE_ICTTD7/8OS-
demonstrate an consistently observe 1.1 Follow OHS policies and procedures 0j-1
understanding of precautionary measures and in identifying hazards and risks
concepts and underlying respond to risks and hazards in 1.2 Explain hazards and risks in the
principles of the workplace workplace
Occupational Health 1.3 Identify hazards and risks indicators
0 and Safety (OHS) in as prescribed by the manufacturer
relation to health and 1.4 Apply contingency measures in 1 Week
risk hazards in the accordance with the OHS procedures
workplace LO 2. Evaluate and control hazards and TLE_ICTTD7/8OS-
risks 0j-2
2.1 Determine the effects of hazards in
the workplace
2.2 Identify the methods in controlling
hazards and risks
2.3 Follow OHS procedures for
controlling hazards and risks
LO 3. Maintain Occupational Health and TLE_ICTTD7/8OS-
Safety 0j-2
465
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
LESSON 1: USE OF HAND TOOLS (UT)
` The learners The learners shall be able to use
LO 1. Prepare hand tools and equipment
0 demonstrate an hand tools and equipment in in Illustration TLE_ICTIL7/8UT-
understanding of hand Illustration 1.1 List hand tools and equipment based 0a-1
tools and equipment in on job requirement 1 Week
Illustration 1.2 Identify appropriate hand tools and
equipment
1.3 Classify hand tools and equipment
according to function and task
requirement
LESSON 2: MAINTAIN HAND TOOLS, DRAWING INSTRUMENTS, EQUIPMENT AND PARAPHERNALIA (MT)
The learners The learners shall be able to TLE_ICTIL7/8MT-
demonstrate an maintain tools, drawing LO 1. Inspect hand tools and equipment 0b-1
understanding of instruments, equipment, and received in Illustration
concepts and principles paraphernalia 1.1 Check list of tools and equipment to
in maintaining hand be requested per job requirement
tools, drawing 1.2 Inspect the condition of all the
instruments, requested tools and equipment
equipment, and 1.3 Assess the hand tools and equipment
paraphernalia for proper operation and safety 2 Weeks
0 LO 2. Use and maintain hand tools, TLE_ICTIL7/8MT-
measuring instrument and equipment 0c-2
466
The learners The learners shall be able to LO 1. Analyze signs, symbols, and data TLE_ICTIL7/8TD-
demonstrate an read and interpret technical 1.1 Prepare tools and instruments used in 0f-1
understanding of drawings and work plans illustration
concepts and principles accurately 1.2 Interpret signs, symbols, and data
0 in interpreting technical according to job specifications
drawings and work 1.3 Perform simple trade mathematical 2 Weeks
plans conversions
LO 2. Interpret illustration drawings and TLE_ICTIL7/8TD-
plans 0g-2
2.1 Identify illustration tools and
materials to be used in preparing a
simple illustration
2.2 Identify dimensions and specifications
according to job requirements
LESSON 5: PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURE (OS)
The learners The learners shall be able to LO 1. Identify hazards and risks TLE_ICTIL7/8OS-
demonstrate an consistently observe 1.5 Follow OHS policies and procedures 0h-1
understanding of precautionary measures and in identifying hazards and risks
concepts and underlying respond to risks and hazards in 1.6 Explain hazards and risks in the
principles of the workplace workplace
Occupational Health and 1.7 Identify hazards and risks indicators
0 Safety (OHS) in relation as prescribed by the manufacturer
to health and risk 1.8 Apply contingency measures in 1 Week
hazards in the accordance with the OSH procedures
workplace LO 2. Evaluate and control hazards and TLE_ICTIL7/8OS-
risks 0i-2
468
QUARTER CONTENT STANDARDS PERFORMANCE MOST ESSENTIAL LEARNING DURATION K-12 CG Code
STANDARDS COMPETENCIES
The learner demonstrates The learner Discuss principles and strategies 1 Week
understanding of the key concepts independently creates on identifying business
and underlying principles of a business vicinity map opportunities
identifying business opportunities showing target market
and market in one’s community or in his/her community
Explore business/ career
locality or locality
opportunities
The learner demonstrates The learner Analyze the market needs 2 Weeks TLE_ICTAN11/12PC-
understanding of concepts, independently Ia-1
underlying principles of developing prepares and present a Determine the possible products
simple business plan simple business plan and services that will meet the
need
469
Note: Simulation of a Simple Home-Based Micro Business aligned to the mini course/s taken, may be employed as an alternative.
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING COMPETENCIES DURATION K-12 CG Code
1ST The learner applies the The learner performs skillfully LO 1. Understand concepts related to 1 WEEK TLE_HEHC9-
QUARTER principles of art and the use of design, materials, needlecraft 12PE-Ia-b-2
handicraft to create a and techniques to create 1.1 Identify major needlecraft techniques
beautiful and embroidered products. 1.2 State safety and precautionary
measures
marketable
embroidered product.