The document provides calculations for sizing a clean out door that is 36 inches by 48 inches. It first calculates that the minimum required cross-sectional area of reinforcement over the top of the opening is 10,692 mm^2. It then details that a reinforcing plate with thickness of 22 mm and height of 1,400 mm is provided, giving an area of 11,000 mm^2, which meets requirements. Finally, it calculates the minimum required thickness of the bottom reinforcing plate to be 31.2 mm and specifies a thickness of 32.0 mm will be provided.
The document provides calculations for sizing a clean out door that is 36 inches by 48 inches. It first calculates that the minimum required cross-sectional area of reinforcement over the top of the opening is 10,692 mm^2. It then details that a reinforcing plate with thickness of 22 mm and height of 1,400 mm is provided, giving an area of 11,000 mm^2, which meets requirements. Finally, it calculates the minimum required thickness of the bottom reinforcing plate to be 31.2 mm and specifies a thickness of 32.0 mm will be provided.
The document provides calculations for sizing a clean out door that is 36 inches by 48 inches. It first calculates that the minimum required cross-sectional area of reinforcement over the top of the opening is 10,692 mm^2. It then details that a reinforcing plate with thickness of 22 mm and height of 1,400 mm is provided, giving an area of 11,000 mm^2, which meets requirements. Finally, it calculates the minimum required thickness of the bottom reinforcing plate to be 31.2 mm and specifies a thickness of 32.0 mm will be provided.
Clean Out Door Size 36 in x 48 in 1 )- Claculations of shell reinforced plate As per clause 5.7.7.4 required cross -section area of the reinforcement Over the top of the opening Acs <=K1*h*t/2 10692 where Acs =cross-sectional area of the reinforcement over the top of the opening ,in mm^2 k1= area of coefficient from fig. 1.08 h =Vertical height of Clear Opening ,in mm 900 mm b=horizontal width of clear opening ,in mm 1200 mm t= Calc. thickness of the lowst shell course exclusive of any corr. allowance. 22.00 mm computing for vertical axis in fig. 271,269 (H+8.8)D+71.5 123 t 1.408 h * 4.9D (H-0.3 = 0.8 Where H= Max.design liquid level 17 m D= Nominal tank diameter 46 m G=sp. gravity not less than 1.00 Unite scale horiz.=0.004 Therefore Value of K1 from FIG .5-11 = 1.08 Min.Cross -Sectional area ,Acs 10692 mm^2 as per clause 3.7.7.5 max .height of reinforcement ,1.5h = 1350 mm Dimension of reinforcing plate (RF) Provided Ap =tpx(L-h) 25% Wtp=thickness of RF plate = 22.00 mm L=hieght of RF Plate = 1400 mm h=height of clear opening = 900 mm 11000 mm^2 safe area Calculation of bottom reinforcing plate As per clause 5.7.7.6 required min.thickness of bottom reinforcing plate tb =( h^2/360000)+( b/170)*sqrt(HG) 31.2 mm Provide thickness 32.0 mm