Professional Documents
Culture Documents
Ultrasonic Flow Sensor Specification
Ultrasonic Flow Sensor Specification
www.pztceramics.com violet.shan@pztceramics.com
Ultrasonic Flow Sensor Parameter
Electrical specification:
type JDRC-14002 Resonant <100Ω Sensitivity >35db
impedance
capacitance 1200PF±10% Center 960KHz±10KHz Return radio >0.6mv
frequency
Aftershock <10Bus Work 0°C-95°C Sealing Epoxy resin
temperature method potting
Pressure >3.0MPa Degree of IP68 Lead position Sensor center
resistance protection
Note: All materials comply with the requirements of environmental protection, while
Piezoelectric ceramic exempt from lead restriction.
www.pztceramics.com violet.shan@pztceramics.com
Package:
PCS/CTN Packing plate Packing box Gross weight Net weight
(cm) (cm) ( Kg ) ( Kg )
500 32.5×30×3.5 34×32×26 6.3 5.6
Note:
1.Storage Condition:-25°C~11°C.
2.Please take Anti interference into consideration when designing driving circuit.
3.Driving voltage is suggested to be lower than 5Vpp.
4.Operating temperature:0°C~+95°C.
5.Maximum pressure endurance is 3.0MPa.
www.pztceramics.com violet.shan@pztceramics.com