Professional Documents
Culture Documents
Appendix A References: J. Structural Division
Appendix A References: J. Structural Division
REFERENCES
AISI (1981). Wire rope user's manual. 2nd edition, American Iron
and Steel Institute, Washington DC.
ANSI/ASCE (1991). Design of latticed steel transmission towers.
ANSI/ASCE Standard 10-90, New York.
ASCE (1972). Guide for the design of aluminum transmission towers.
J. Structural Division, ASCE, December.
ASCE (1990). Design of steel transmission pole structures. ASCE
Manual No. 72, ASCE, 2nd edition, New York.
ASCE (1991). Guidelines for electrical transmission line structural load-
ing. ASCE Manual 74, New York.
ASTM (1989). Standard specification for steel wire strands. ASTM
Standard A475.
ASTM (1992). Standard specification for zinc coated parallel and helical
steel wire structural strands. ASTM Standard A586-92.
Behncke, R. H., Milford, R. V., and White, H. B. (1994). "High
intensity wind and relative reliability based loads for transmission
line design." Paper 22-205, CIGRE, Paris, August.
Bresler, B., Lin, T. Y., and Scalzi, J. B. (1960). Design of steel struc-
tures. 2nd edition, John Wiley, New York.
CAN/CSA (1986). Antennas, towers and antenna supporting struc-
tures. CSA Standard S37.M86, Canadian Structural Association,
Rexdale, Ontario.
CAN/CSA (1992). Zinc coated steel wire strands. CAN/CSA Stan-
dard G12-1992, Canadian Structural Association, Rexdale, On-
tario.
Gere, J. M. and Carter, W. O. (1962). "Critical buckling loads for
tapered columns." /. Structural Division, ASCE, 88 (ST1), Febru-
ary, 1-12.
IEEE (1985). Trial-use guide for transmission structure foundation de-
sign. IEEE Standard 691, New York (under revision).
79
80 DESIGN OF GUYED ELECTRICAL TRANSMISSION STRUCTURES