Professional Documents
Culture Documents
Technical Specifications: Hydraulic Excavator
Technical Specifications: Hydraulic Excavator
Technical Specifications: Hydraulic Excavator
Hydraulic Excavator
Technical Specifications
Engine Track
Engine Model ALUW06DTI Standard Track Shoes Width 600 mm 24 in
Net Power – ISO 9249 85 kW 114 hp Number of Shoes (each side) 45
Net Power – SAE J1349 85 kW 114 hp Number of Track Rollers (each side) 7
Gross Power – ISO 14396/SAE J1995 100 kW 134 hp Number of Carrier Rollers (each side) 2
Bore 104 mm 4 in
Stroke 113 mm 4 in Drive
Displacement 5.76 L 351 in3 Maximum Gradeability 35°/70%
• Non-certified emission engine. Maximum Travel Speed 5.5 km/h 3.4 mph
• Recommended for use up to 4000 m (13,120 ft) altitude with Maximum Drawbar Pull 210 kN 47,210 lbf
engine power derate above 3000 m (9,840 ft).
• Net power advertised is the power available at the flywheel when Hydraulic System
the engine is equipped with fan, air cleaner, muffler, and alternator.
• Rating at 1,800 rpm. Main System – Maximum Flow – 400 L/min 106 gal/min
Implement (200 L/min (53 gal/min
Engine rpm × 2 pumps) × 2 pumps)
Maximum Pressure – Equipment – 35 000 kPa 5,075 psi
Operation 1,700 rpm
Implement
Travel 1,800 rpm
Maximum Pressure – Travel 35 000 kPa 5,075 psi
Swing Mechanism Maximum Pressure – Swing 25 000 kPa 3,625 psi
Pilot System – Maximum Flow 17 L/min 4 gal/min
Swing Speed 11.00 rpm Pilot System – Maximum Pressure 3900 kPa 566 psi
Swing Torque 62 kN·m 45,581 lbf-ft Boom Cylinder – Bore 120 mm 5 in
Boom Cylinder – Stroke 1260 mm 50 in
Weights
Stick Cylinder – Bore 140 mm 6 in
Operating Weight 20 800 kg 45,860 lb Stick Cylinder – Stroke 1504 mm 59 in
• Standard undercarriage, 5.7 m (18'8") reach boom, 2.5 m (8'2") Bucket Cylinder – Bore 120 mm 5 in
HD reach stick, 1.00 m3 (1.31 yd3) GD bucket, 600 mm (24") shoes.
Bucket Cylinder – Stroke 1104 mm 43 in
320D3 Hydraulic Excavator Specifications
600 mm (24") Wide, 10 mm (0.4") Thick 600 mm (24") Wide, 8.5 mm (0.3") Thick
Triple Grouser Shoes Triple Grouser Shoes
Weight Ground Pressure Weight Ground Pressure
3.7 mt (8,160 lb) Counterweight + Base Machine
5.7 m (18'8") reach boom, 2.5 m (8'2") HD
20 800 kg 45,860 lb 43.2 kPa 6.3 psi 20 670 kg 45,570 lb 43.0 kPa 6.2 psi
reach stick, 1.00 m3 (1.31 yd3) GD bucket
All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.
2
320D3 Hydraulic Excavator Specifications
kg lb
Base machine with 3.7 mt (8,160 lb) counterweight, swing frame, base frame with track rollers and carrier rollers, 14 520 32,010
two boom cylinders, pins, fluids and 75 kg (165 lb) operator
Track Shoes:
600 mm (24") Width, 10 mm (0.4") Thick, Triple Grouser Track Shoes 2480 5,470
600 mm (24") Width, 8.5 mm (0.3") Thick, Triple Grouser Track Shoes 2400 5,290
Two Boom Cylinders 360 790
Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 430 940
Counterweight:
3.7 mt (8,160 lb) Counterweight 3700 8,160
Swing Frame:
Standard Swing Frame 1770 3,900
Undercarriage:
Base Frame with Standard Track Rollers and Carrier Rollers 4180 9,220
Boom (including lines, pins, stick cylinder):
Standard Reach Boom 5.7 m (18'8") 1910 4,200
Stick (including lines, pins, bucket cylinder, bucket linkage):
HD Reach Stick 2.5 m (8'2") 1080 2,380
Buckets (without linkage):
1.0 m³ (1.31 yd³) GD, with Sidecutter and Tip 760 1,680
1.0 m³ (1.31 yd³) HD, with Sidecutter and Tip 970 2,140
3
320D3 Hydraulic Excavator Specifications
Dimensions
All dimensions are approximate and may vary depending on bucket selection.
3 4
5
6
9 7
10 8
2
4
320D3 Hydraulic Excavator Specifications
Feet Meters
35
10
30 9
8
25
7
20 6
5
15 3 4
4
10 3
2
5 5
1
0 0
2
1
5 R2.5B1 (8'2")
2
7
10 3 1 6
4
15
5
20 6
7
25
8
11 10 9 8 7 6 5 4 3 2 1 0 1 Meters
35 30 25 20 15 10 5 0 Feet
5
320D3 Hydraulic Excavator Specifications
R2.5B1 HD
4080 mm (13'5")
2200 mm (7'3")
mm
in
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
6
320D3 Hydraulic Excavator Specifications
Reach Boom
Width Capacity Weight Fill HD Reach Stick 2.5 m (8'2")
Linkage mm in m3 yd3 kg lb % 600 mm (24") Shoes
Pin-On (No Quick Coupler)
General Duty (GD) B 1250 50 1.00 1.31 758 1,671 100
Heavy Duty (HD) B 1050 42 1.00 1.31 840 1,852 100
kg 2640
Maximum load with pin-on (payload + bucket)
lb 5,820
The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do Maximum Material Density:
not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended 1800 kg/m3 (3,000 lb/yd3)
at ground line with bucket curled.
Capacity based on ISO 7451:2007.
Bucket weight with General Duty tips.
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are
outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including
but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or
catching of heavy loads will reduce the life of the boom and stick.
PIN-ON ATTACHMENTS
Boom Type Reach Boom
Stick Size HD Reach Stick 2.5 m (8'2")
Hydraulic Hammers B20 Top-mount 9
B20 Side-mount 9
H120Es 9
H130Es 9
7
320D3 Standard and Optional Equipment
8
320D3 Hydraulic Excavator Specifications
9
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEXJ0071-01 (09-2018)
at www.cat.com Replaces AEXJ0071
(India)
© 2018 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.