Professional Documents
Culture Documents
Single USB Key Tool Creation Quick Start Guide
Single USB Key Tool Creation Quick Start Guide
These instructions build a single USB key that includes both the
HP System Board Configuration tool and
HP System Board Replacement & System Diagnostics utilities
To download and build the tool, please follow the steps below:
3. Place an 8GB or greater USB key into any available USB port.
4. Right click over the “MakebootableDMI.exe” and select “Run as Administrator”
5. With the command shell window selected, press Enter
6. The inserted USB key will be seen with a number assigned to it.
7. Select the number corresponding to the USB you would like to format.
8. Press Y key twice to format the USB.
9. Type 1 to select the USB image tobuild.
10. Image will now build.