Professional Documents
Culture Documents
PSR Addendum - Part1 - Pon
PSR Addendum - Part1 - Pon
Earth Work
Code Description Unit Rate
2.28 Supplying and filling in plinth with river sand cum 344.69
under floors including, watering, ramming
consolidating and dressing complete.
4 . Concrete Work
Code Description Unit Rate
4.16.1 Providing and fixing upto floor five level precast cum 3257.44
cement concrete string or lacing courses,
copings, bed plate, anchor block, plain window
sill, shelves, louvers, steps, stair cases etc.
including hoisting and setting in position with
cement mortar 1:3 (1 cement : 3 sand), cost of
centring, shuttering and finishing smooth with
6mm thick cement plaster 1:3 (1 cement : 3
sand) on exposed surface complete - 1:2:4 (1
cement : 2 sand : 4 graded stone aggregate
20mm nominal size)
4.16.2 Providing and fixing upto floor five level precast cum 2928.16
cement concrete string or lacing courses,
copings, bed plate, anchor block, plain window
sill, shelves, louvers, steps, stair cases etc.
including hoisting and setting in position with
cement mortar 1:3 (1 cement : 3 sand), cost of
centring, shuttering and finishing smooth with
6mm thick cement plaster 1:3 (1 cement : 3
sand) on exposed surface complete - 1:3:6 (1
cement : 3 sand : 6 graded stone aggregate
20mm nominal size).
4.17.1 Providing and fixing at or near ground level cum 2793.00
precast cement concrete in kerbs, edgings etc.
as per approved pattern and setting in position
with cement mortar 1:3 (1 cement : 3 sand)
including the cost of required centring,
shuttering and finishing smooth with 6mm thick
cement plaster 1:3 (1 cement : 3 sand) on
exposed surfaces complete - 1:2:4 (1 cement : 2
sand : 4 graded stone aggregate 20mm
nominal size)
5.9 Providing and laying upto floor five level cum 2025.57
reinforced cement concrete in kerbs, steps and
the like excluding the cost of centring,
shuttering, finishing and reinforcement with
1:2:4 (1 cement : 2 sand : 4 graded stone
aggregate 20mm nominal size)
5.9.1 Providing and laying upto floor five level cum 2280.16
reinforced cement concrete in kerbs, steps and
the like excluding the cost of centring,
shuttering, finishing and reinforcement with
1:1.5:3 (1 cement : 1.5 sand : 3 graded stone
aggregate 20mm nominal size)
5.19 Providing, hoisting and fixing upto floor five cum 3304.33
level precast reinforced cement concrete in
string courses, bands, copings, bed plates,
anchor blocks, plain window sills and the like
including the cost of required centring,
shuttering, finishing smooth with 6mm thick
cement plaster 1:3 (1 cement : 3 sand) on
exposed surfaces complete but excluding cost
of reinforcement with 1:2:4 (1 cement : 2 sand :
4 graded stone aggregate 20mm nominal size).
5.31A finishing the exposed surface of r.c.c. work with Sqm 43.01
6mm thick cement mortar 1:3 (1 cement : 3 sand)
5.32 Extra for rendering smooth the top of suspended sqm 33.96
floors,landings and staircases (treads and risers)
with cement mortar 1:2 ( 1 cement : 2 sand)
including a floating coat of neat cement and
protecting the surface with a layer of 7.5 cm of
earth laid over 15mm of fine sand incase of
suspended floor and bricks laid in mud mortar in
case of landings and steps including
subsequent removal and cleaning of the same.
6.7 Extra for brick work with bricks of class Cum 150.48
designation 35 curved on plan upto a mean
radius not exceeding 6 metres.
6.13 Brick work 7cm thick with country bricks of class Sqm 148.35
designation 35 in cement mortar 1:3 (1 cement
: 3 coarse sand) in superstructure.
6.20A Extra for providing and placing in position 2nos. Sqm 38.27
6mm dia. M.S. bars at every third course of half
brick masonry (with brick class designation 35)
Pondicherry Page 11
6 . Brick Work
Code Description Unit Rate
Pondicherry Page 12
9 . Wood Work
Code Description Unit Rate
Pondicherry Page 13
10 . Steel Work
Code Description Unit Rate
10.6 Providing and fixing 1mm thick m.s. sheet Sqm 1602.87
sliding shutters with frame and diagonal braces
of 40x40x6mm angle iron, 3mm M.S.gusset
plates at the junction and corners, 25mm dia.
pulley, 40x40x6mm angle and t-iron guide at
the top and bottom respectively including
applying a priming coat of approved steel
10.7.1 Providing and fixing 1mm thick M.S. sheet door Sqm 1268.67
with frame of 40x40x6mm angle iron and 3mm
M.S. gusset plates at the junction and corners,
all nessesary fittings complete,including
applying a priming coat of approved steel
primer- using M.S. angles 40x40x6mm for
10.7.2 Providing and fixing 1mm thick M.S. sheet Sqm 1198.33
garage door with frame of 40x40x6mm angle
iron and 3mm M.S. gusset plates at the junction
and corners, all necessary fittings complete,
including applying a priming coat of approved
Pondicherry Page 14
10 . Steel Work
Code Description Unit Rate
10.19 Providing and fixing M.S. fan clamp type-i of each 59.63
16mm dia m.s. bar bent to shape with hooked
ends in R.C.C. slabs during laying including
painting the exposed portion of loop, all as per
standard design complete.
10.20 Extra over rate of code no.10.19 for providing cm.heig 0.95
and fixing M.S. fan lamp type-ii as per design
in R.C.C. beams during laying towards the
additional height of the clamp due to beam rib.
Pondicherry Page 15
10 . Steel Work
Code Description Unit Rate
10.21 Providing and fixing circular cast iron box for each 68.01
ceiling fan clamp 140mm internal dia, 73mm
height, 5mm thick rim bottom and top lids,
1.5mm thick M.S. sheet with its top surface
backed for proper bonding top lid shall be
screwed into the cast iron box by means of
3.3mm dia round headed screws, one lock at
the corners. clamps shall be made of 12mm dia
M.S. bar bent to shape as per standard
Pondicherry Page 16
10 . Steel Work
Code Description Unit Rate
Pondicherry Page 17
11 . Flooring
Code Description Unit Rate
11.10.1 Cement plaster skirting (upto 30cm height) with Sqm 114.16
cement mortar 1:3 (1 cement : 3 sand) finished
with a floating coat of neat cement including
rounding of junctions with floor - 18mm thick.
11.10.2 Cement plaster skirting (upto 30cm height) with Sqm 121.18
cement mortar 1:3(1 cement :3 sand) finished
with a floating coat of neat cement including
rounding of junctions with floor - 21mm thick.
11.81 Providing and laying in floors fully vitrified tiles sqm 1186.94
of thickness not less than 10mm of size 60cm x
60cm of premium quality make of
Johnson/Regency/Naveen tiles of approved
colour and design laid on 20mm thick cement
mortar 1:4 (one cement : four sand ) including
grouting the joints with white cement and
matching pigment etc.,complete.
11.82 Providing and laying in floors fully vitrified tiles sqm 1380.13
of thickness not less than 10mm of size 60cm x
60cm of premium quality make of Bell tiles of
approved colour and design laid on 20mm thick
cement mortar 1:4 (one cement : four sand )
including grouting the joints with white cement
and matching pigment etc.,complete.
11.83 Providing and laying in floors fully vitrified tiles sqm 864.18
of thickness not less than 8mm of size 45cm x
45cm of premium quality make of
Johnson/Regency/Naveen tiles of approved
colour and design laid on 20mm thick cement
mortar 1:4 (one cement : four sand ) including
grouting the joints with white cement and
matching pigment etc.,complete.
11.88 Tile work in skirting, risers of steps over 12mm Sqm 772.55
thick bed of cement mortar 1:3 (1 cement : 3
sand) and jointed with grey cement slurry @ 3.3
kg/sqm including pointing in white cement
mixed with pigment of matching shade
complete - Fully vitrified tiles 45x45cm 8mm
thick.Premium quality make of
Johnson/Regency/Naveen of approved colour
11.89 Tile work in skirting, risers of steps over 12mm Sqm 1272.02
thick bed of cement mortar 1:3 (1 cement : 3
sand) and jointed with grey cement slurry @ 3.3
kg/sqm including pointing in white cement
mixed with pigment of matching shade
complete - Fully vitrified tiles 60x60cm 10mm
thick.Premium quality make of Bell approved
11.90 Tile work in skirting, risers of steps over 12mm Sqm 1085.02
thick bed of cement mortar 1:3 (1 cement : 3
sand) and jointed with grey cement slurry @ 3.3
kg/sqm including pointing in white cement
mixed with pigment of matching shade
complete - Fully vitrified tiles 60x60cm 10mm
thick. Premium quality make of
Johnson/Regency/Naveen tiles of approved
11.91 Tile work in skirting, risers of steps over 12mm Sqm 577.42
thick bed of cement mortar 1:3 (1 cement : 3
sand) and jointed with grey cement slurry @ 3.3
kg/sqm including pointing in white cement
mixed with pigment of matching shade
complete - Rectified tiles 40.50x40.50cm 8mm
thick.Premium quality make of Johnson/
Pondicherry Page 19
11 . Flooring
Code Description Unit Rate
Pondicherry Page 20
12 . Roofing
Code Description Unit Rate
12.13 Extra for providing and fixing wind ties of 40 x 6 metre 62.24
mm flat iron section.
12.33A Providing and laying pressed clay tiles (as per sqm 201.00
approved pattern 20 mm nominal thickness and
of approved size) on roofs jointed with cement
mortar 1:4 (1 cement : 4 coarse sand) mixed
with 2% integral water proofing compound laid
over a bed of 20 mm thick cement mortar 1:4 (1
cement : 4 coarse sand) and finsihed neat
Pondicherry Page 21
13 . Finishing
Code Description Unit Rate
13.51A Providing and fixing on wall face with broken sqm. 146.74
glasses in C.M. 1:4 (one cement : 4 sand)
Pondicherry Page 23
14 . Repairs To Buildings
Code Description Unit Rate
Pondicherry Page 24
16 . Miscellaneous Building Works
Code Description Unit Rate
16.15 Brick edging 7cm wide 11.4cm deep to plinth metre 11.62
protection with bricks of class designation 35
including grouting with cement mortar 1:4 (1
cement : 4 fine sand).
16.24 Providing and fixing factory made PVC door metre 245.95
frame manufactured by M/s. Rajshri or
equivalent of size 50x47mm with a wall
thickness of 5mm, made out of extruded 5mm
rigid PVC foam sheet mitred at corners and
joined with 2 Nos. of 150mm long brackets of
15x15mm M.S. square tube, the vertical door
profiles to be reinforced with 19x19mm M.S.
square tube of 19 guage, EPDM rubber gasket
weather seal to be provided through out the
frame. The door frame to be fixed to the wall
using M.S. screws of 65/100mm size complete
as per manufacturers specification and direction
of Engineer-in-Charge.
16.25 Providing and fixing 30mm thick factory made sqm 1753.00
PVC rigid foam panelled door shutters
manufactured by M/s. Rajshri or equivalent
made from M.S. tube of 19 gauge thickness,
size 19x19mm for styles and 15x15mm for top
and bottom fails, covered with heat moulded
PVC "C" channel of 5mm thick sheet and
30x50mm wide to to form styles and 5mm thick
and 75mm wide PVC sheets for top rail, lock rail
and bottom rail on either side and 5mm thick,
20mm wide cross PVC sheet as gap insert for
top rail and bottom rail, panelling of 5mm thick
PVC sheet fitted in the M.S. frame welded /
sealed to the styles and rails with 5x30mm PVC
sheet beading on either side and joined
together with solvent cement adhesive etc.,
complete as per manufacturerrs specification
and direction of Engineer-in-Charge fixed to
frames with 4 Nos. M.S. powder coated butt
hinges (For W.C. and bathroom shutters)
Pondicherry Page 25
16 . Miscellaneous Building Works
Code Description Unit Rate
16.26 Providing and fixing 30mm thick factory made sqm 2181.15
PVC rigid foam panelled door shutters
manufactured by M/s. Rajshri or equivalent
made from M.S. tube of 19x19mm, 19 gauge
for styles and 15x15mm for top and bottom
rails, covered with heat moulded prelaminated
PVC "C" channel of 5mm thick sheet and
30x50mm wide to form styles and 5mm thick
and 75mm wide prelaminated PVC sheets for
top rail, lock rail and bottom rail on either side
and 5mm thick, 20mm wide cross PVC sheet as
gap insert for top rail and bottom rail, panelling
of 5mm thick PVC sheet prelaminated on both
sides fitted in the M.S. frame welded / sealed to
the styles and rails with 5x30mm prelaminated
PVC sheet beading on either side and joined
together with solvent cement adhesive etc.
complete as per manufacturers specification
and direction of Engineer-in-Charge fixed to
frames with 4 Nos. M.S. powder coated butt
16.27 Providing and fixing PVC rigid foam sheet 1mm sqm 316.25
thick manufactured by M/s. Rajshri or
equivalent on existing door shutters (bathroom
and W.C. doors) using synthetic rubber based
adhesive (Fevicol SR 998 or equivalen)
16.59 Providing and fixing of M.S rungs of 25cm wide each 117.12
of required shape using 16mm dia. M.S rods at
required spacing fixing in cement concrete
block of size 65x23x15cm in C.C 1:2:4( 1
cement :2 sand : 4 HBG 20mm metal) including
painting with required ready mixed paint (two
or more coats) over one coat of primer of
approved quality all as directed by the
Pondicherry Page 27
20 . Water Supply
Code Description Unit Rate
20.2.1.1 Providing and fixing G.I. pipes complete with metre 98.39
G.I. fittings and clamps, including cutting and
making good the walls etc. (internal work)
exposed on walls - 15mm nominal bore (1.22
20.2.1.2 Providing and fixing G.I. pipes complete with metre 123.16
G.I. fittings and clamps, including cutting and
making good the walls etc.(internal work)
exposed on walls - 20mm nominal bore (1.58
20.2.2.1 Providing and fixing G.I. pipes complete with metre 126.35
G.I. fittings and clamps, including cutting and
making good the walls etc. (internal work)
Concealed pipe including painting with anti
corrosive bitumastic paint, cutting chases and
making good the wall - 15 mm nominal bore
20.2.2.2 Providing and fixing G.I. pipes complete with metre 149.35
G.I. fittings and clamps, including cutting and
making good the walls etc. (internal work)
Concealed pipe including painting with anti
corrosive bitumastic paint, cutting chases and
making good the wall - 20 mm nominal bore.
20.3.1 Providing and fixing G.I. pipe complete with metre 108.90
G.I. fittings including trenching and refilling
etc., (extranal work) - 15 mm dia nominal bore
20.3.2 Providing and fixing G.I. pipe complete with metre 129.30
G.I. fittings including trenching and refilling
etc., (extranal work) - 20 mm dia nominal bore
20.3.3 Providing and fixing G.I pipes complete with metre 156.84
G.I fittings including trenching and refilling and
etc. (external work ) - 25 mm dia nominal bore
20.3.5 Providing and fixing G.I. pipes complete with metre 225.25
G.I. fittings including trenching and refilling etc.
Pondicherry Page 28
20 . Water Supply
Code Description Unit Rate
20.3.8 Providing and fixing G.I. pipes complete with metre 469.96
G.I. fittings including trenching and refilling etc.
(external work) - 80mm nominal bore.
Pondicherry Page 31
21 . Drainage
Code Description Unit Rate
Pondicherry Page 32
21 . Drainage
Code Description Unit Rate
21.12.2.2 Extra for depth for manholes - size 120 x 90 cm metre 2151.61
- with bricks of class designation 35.
Pondicherry Page 38
22 . Miscellaneous
Code Description Unit Rate
22.27.5 Charges for developing the borewells with air 1 hour 616.00
compressor of 600 CFM capacity (minimum 8
hours) including transportation labour and fuel
charges for compressor as directed by the
Engineer-in-charge and conducting yield test by
'v' Notch Methods
Pondicherry Page 41
30 . Irrigation
Code Description Unit Rate
30.11 Supplying with gravel for apron and rivetment. cum 222.48
Pondicherry Page 42