Professional Documents
Culture Documents
Beilharz Product Catalog 13.03.2015
Beilharz Product Catalog 13.03.2015
Q U A L IT Y F R
RER
M A N UI NF AG CE RTMUA N Y
MADE
Delineators 4
VARIO-Delineator cap 16
Impact cushions 19
Reflectors 20
WINTER EQUIPMENT
Snow fences 40
Qualification, experience and quality come Delineators are a precautionary method to pre-
first in terms of safety. Well reflecting deline- vent cars from abandoning the track. Ultimately
ators provide an essential contribution to road Beilharz Delineators make a significant contri-
safety and accident prevention. Delineators are bution to the preservation of economic values.
a supporting device to the road markings, par-
ticularly outside built-up areas, especially at
night and in cases of poor visibility condition.
4 Delineators
Road Equipment
Beilharz has more than 50 years’ experience Quality characteristics of the delineators ISO 9001:2008
Cer tific Qualitätsmanagement
RA at
made by Beilharz:
EK i
There are two main characteristics about de- • An increase of the thickness in critical ze
r tifiz ier
t
Regelmäßige freiwillige
Überwachung nach ISO 9001:2008
lineators made by Beilharz: high functionality areas (clamping areas) improves the
and permanent quality! The high molecular stability of delineators made by Beilharz
5 YEARS
BEILHARZ ROAD DELINEATORS
low-pressure polyethylene (PE-HD-HM) used • The black daytime marking is perfectly
for the production of our delineators contains smooth and fully bonded to the surface of
WARRANTY
selected additives in order to extend the the delineator
UV-stability beyond the 5 year warranty period • Reflectors, classification and stationing
and to secure a permanent durability. mark plates in embedded pockets
• Standard drillings for mounting of
Delineators made by Beilharz are manufac- telephone information signs
tured in one piece with a perfectly smooth • Extremely rugged, UV-resistant and
surface. As a result our delineators don’t have ozone-resistant
any welds where they might break. • Cold-resistant and heat-resistant
• Acid-resistant and alkali-resistant
• Resistant to exhaust fumes and gritting salt
• Resistant to mechanical strains
and rock slide
• Easy cleaning and maintenance
Delineators 5
D E L IN E ATO R
GERMANY
-c er tif ie d
GROUND-MOUNTED DELINEATOR
Type LP 611
Reinforcement without /
tubular core/profile section core
1) 2) 3) 4) 5) 6) 7) 8)
6 Delineators Germany
Road Equipment
SHEAR-OFF DELINEATOR
LP 311 Wedge & break-off clip LP 315 Perfect LP 316 Brilliant
105
2/3/4.5/special thicknesses
with wedge for tipping up for pitching up
and break-off clip
50/75
Circular tube base part ,9)
Universal base part 11) Universal base part 12)
particularly for LP 311 with wedge,
Universal base part for mounting Universal base part for mounting
break-off clip and fixing metal strap
on concrete ground 13) on concrete ground 13)
Universal base part with
wedge and break-off clip 10)
Universal base part for mounting
on concrete ground 13)
Delineators Germany 7
SELF-RIGHTING DELINEATOR DIG-IN DELINEATOR
Type LP 317 LP 621 LP 624
8 Delineators Germany
Road Equipment
OPTIONS
All delineators made by Beilharz All delineators are available with Delineators with integrated Delineators with various-colored
are available with integrated embedded pockets for the different snow poles or drilling for one-sided or both-sided daytime
wild animal warning reflectors. stationing mark plates to rivet, to screw snow poles available. marking available
in and for clip-in.
Delineators Germany 9
GUARD-R AIL DELINEATOR
Type LP 536 LP 539 LP 540 LP 544 A/B
1) 2) 3) 4)
10 Delineators Germany
Road Equipment
GUARD-R AIL DELINEATOR
LP 540 Stand-up LP 544 Stand-up LP 548
55
2/3/4.5/special thicknesses
Fixation coating/
holder with screw bridge
Delineators Germany 11
GUARD-R AIL DELINEATOR
Type LP 546 LP 541 LP 547 Stand-up
Guard-Rail Delineator Screw holder for guard-rails Metal holder for concrete barriers, Metal holder with spring-tilt-element
with box system, for mounting for mounting straight on the top of the for concrete barriers, for mounting
straight on the box concrete barrier straight on the top of the concrete
barrier
12 Delineators Germany
13
Road Equipment
L
IN TE R N ATI O N A
D E L IN E AT O R
-c er tif ie d
INTERNATIONAL DELINEATOR
Type Round delineator Ø 120 mm, Round delineator Ø 120 mm, Swiss Freeway/Motorway
length 1.20 m 1.40 m
Description Ground-mounted Delineator Dig-in Delineator Ground-mounted Delineator/
Dig-in Delineator
Delineator length [cm] 120 140 120 – 160
Thicknesses [mm] 2/3/4.5/special thicknesses 2/3/4.5/special thicknesses 2/3/4.5/special thicknesses
14 International Delineator
Road Equipment
INTERNATIONAL DELINEATOR
Austria Russia Belgium triangular Belgium flat Netherlands flat
Ground-mounted Delineator Dig-in Delineator Dig-in Delineator Dig-in Delineator Dig-in Delineator
100 – 200 100 – 200 120 112 and 140 112 and 140
3/4.5/special thicknesses 3 3 3 3
open – open/closed – –
50/75/100/155 – 50/75/100
triangular 120 x 3 mm, triangular 100 x 3 mm, 100 x 3 mm,
half-round/flexible half-round/flexible half-round/flexible
40 x 180 mm for instance 40 x100 mm 80 x 120 mm 40 x 180 mm 40 x 180 mm
or 40 x180 mm,
other dimensions possible
with/without integrated with/without with/without pull-out safety with pull-out safety with pull-out safety
snow pole black daytime marking mechanism mechanism mechanism
special length possible
International Delineator 15
OM THE
Q U A LI T Y FR
RER
M A N UI NFAG CE RTMUA N Y
MADE
VARIO-DELINEATOR CAP
for marking of curves with a tight radius and on dangerous tracks
The VARIO-Delineator cap serves the signalization (marking) in a variety special design the VARIO-Delineator cap can be easily clipped
of applications. Primary developed for marking of curves with a tight on in just a few seconds and in different delay angels and
radius and on dangerous motorcycle tracks, the VARIO-Delineator cap rotation-locked. While developing, on the initiative and in close coop-
also qualifies for flexible and fast marking of further danger zones or eration with the Department for Transport and Infrastructure of Baden-
temporary road works such as mowing, traces of oil, etc. The VARIO- Wurttemberg, the main focus was little weight and rounded edges, to
Delineator cap is characterized by little weight, fast and varia- ensure no further danger for the road users in cases of an accident.
ble mounting on delineators as well by high visibility. Due to its
16 VARIO-Delineator cap
Road Equipment
POSSIBLE OPER ATION AREAS
Curve marking
Attention
Speed limit
VARIO-Delineator cap 17
GRASS STOP PLATES
Grass stop plates are synonymous for economic and environmentally con-
scious working, as they prevent the framed objects from plant growth. In
addition the cost-intensive and time-intensive extra-mowing by hand is being
reduced and the use of herbicides is being limited.
TYPES
– Square grass stop plate 300 x 300 mm with a cut-out in the middle
– Grass stop plate completely closed
– Fits perfectly with Recyclable dig-in base Type 160 and 145
– Square grass stop plate 500 x 500 mm with a cut-out shifted to the road
– Grass stop plate completely closed
– Suitable for all triangular delineators
– Cut-out with clamping-effect
Road Equipment
Impact cushions made by Beilharz make an important contribution to
increase the safety on roads and the protection of all road users. The
impact cushion serves as absorbing, passive protective device. Being
mounted at the vehicle restraint system, it prevents primarily motorcyclists
within an accident.
TYPES
Impact cushion
Impact cushion 19
OM THE
Q U A LI T Y FR
RER
M A N UI NFAG CE RTMUA N Y
MADE
REFLECTORS
Certified according to EN 12899
20 Reflectors
Road Equipment
REFLECTORS FOR CONCRETE BARRIERS
Execution Multiple-cell reflector or glass bead Multiple-cell reflector or glass bead Reflector one-sided
reflector, one-sided or both-sided reflector, one-sided or both-sided or both-sided
Assembly For mounting on concrete barriers, For sidewise mounting on concrete For screwing or gluing on
guard rails with box section barriers and tunnel walls
Reflectors 21
REFLECTORS FOR DELINEATORS
Dimension 40 x180 mm, Ø 60 mm, Ø 80 mm 40 x180 mm, Ø 60 mm, Ø 80 mm 40 x180 mm, Ø 60 mm, Ø 80 mm
Assembly with fixed snap-in element with rivets or screws as click-reflector, with rivets
or screws
Dimension 18 x120 mm
22 Reflectors
REFLECTORS FOR GUARD-R AILS
Dimension Ø 60 mm 40 x160 mm Ø 60 mm
Road Equipment
Coefficient of Class 2 according to EN 12899 RA2/B/C certification DIN 67520 Class 2 according to EN 12899
luminous intensity
Assembly for guard-rails with longitudinal hole for guard rails with long hole Guard-rails with screw M16,
mounted at the transition stack
Reflectors 23
„THE GENERAL“ – WILD ANI-
MAL WARNING REFLECTOR
„The General“- wild animal warning reflector made by Beilharz is a real all-rounder, because he
combines the advantages of all available systems on market. The semi-circle profile guarantees
a circulating reflection and the used plastic reflector assures that the car light is getting reflected
parallel to the road. Thereby an optical warning fence is build which prevents wild animals to
cross the road.
TYPE
Certification Photometric audited by the LTI Light Engineering Angle of radiation by the wild animal reflector
Institute University Karlsruhe
Angle of radiation by the Wild animal reflector
Resistance Road salt resistant and weather resistant wild animal reflectors light-blue and silver-white
Road Equipment
Engraved stationing sign
Stationing and classification signs serve the determination of location in traffic and therefore de-
liver important information for paramedics and police forces as well as for the road maintenance
staff. Due to our newly developed concept of engraved stationing plates we reach a maximum
of safety and reliability.
Stationing 25
There are no boundaries regarding the arrangement of alignment and dimension of the informa-
tion on the engraved stationing plates. The following Type scheme shows some of the available
possibilities.
Classification and stationing plate as The “All-In“ plate combines the information Even further detailed information
separated plates of the classification plate and the is possible
stationing plate
26 Stationing
Plug-in stationing plate Advantages The stationing plates for mounting on the delin-
The multipart stationing plate for delineators • Easy mounting directly on the delineator eators are equipped with the specifically de-
and buildings are another alternative for the • High quality and UV-resistant plastic veloped self-assurance of the number and letter
identification of highways, state roads and • The letter and number fields are coloured fields. Just plug-in the fields and you’re done.
county roads. The use of identification plates on and therefore scratch-resistant The information sits immovable and is perfectly
constructions such as bridges is also possible. • The surfaces are smooth, slanted and protected against vandalism. As a standard all
The Plug-in stationing plates are available in therefore easy to clean fields are being delivered in traffic white (RAL
different dimensions and versions. • Many special colours available 9010) with traffic black (RAL 9017) scripting.
(e.g. grey, green, yellow, red, blue)
Road Equipment
• Many different versions available Below you will find a selection of available
(e.g. Clip-in delineators, slant or types. By request we will send our complete cat-
straight edges) alogue with all available types and components.
The self-locking system assures a firm hold of the letter and number fields. The colouring ensures
visibility for decades.
Stationing 27
OM THE
Q U A LI T Y FR
RER
M A N UI NFAG CE RTMUA N Y
MADE
The trapezoid honeycomb pavers have been For providing the maximum passive road se-
developed by Beilharz especially for road curity for all road users the honeycomb pavers
pavement. Based on its special form the honey- are equipped with acoustic pass over nubs.
comb pavers can be used on straight roads as Additionally the trapezoid honeycomb pavers
well as in curved areas. The use of curve radius dispose boreholes for a possible longitudinal
elements is not necessary within our solution. fixing.
The slot and key system ensures a form-locking
connection in any position.
Road Equipment
– Black
grit etc.
• Sowing (if desired)
Beilharz Anti-glare screen systems protect the Quality Performance in case of an impact/crash
car driver extensively against glare emanat- Anti-glare screen systems made by Beilharz are Anti-glare screen systems act passive in general,
ing from light sources and therefore make a tested and certified according to EN 12676. according to the guard-rail substructure.
significant contribution to the safety of the car In addition the wind channel test has been suc-
driver. The particular criteria for using Anti-glare cessfully carried out at a wind speed of 160 The systems don’t have any sharp edges in the
screen systems are frequent accidents during km/h (44,44m/s). Both within the UV-test impact area that might lead to damages or
darkness, heavy traffic at night and unfavora- according to EN 12676 and an additional injuries. The fastening of the systems is such
ble topographical conditions where separate colour fastness test our anti-glare screens had designed that by any impact of a vehicle no
directions are indicated by central strips on the outstanding results. vane parts will be ejected.
road. Our anti-glare screen systems are also
used increasingly on ICE high-speed railway In the CEN – Comité Européen de Normalisa- Climbing through in case of an accident
tracks running parallel to each other, where the tion in Paris – as an active member and official The anti-glare screen system can be climbed
Beilharz Anti-glare screen systems have been representative of German industry we are sig- through easily at any point by rescue teams
optimally proven. nificantly involved in the European safety stand- with stretchers.
ards. Our international expertise in the area of
traffic safety gains recognition for example by Deformation resistance/flexibility
the launch of the anti-glare screen systems in The vanes are inherently stable and flexible at
the USA. the same time. In case of forces up to 90°, the
vanes bounce back immediately into their
initial position, because they are pre-stressed in
the clamping area.
Road Equipment
Performance Pre-assembled delivery
• Oval-shaped, completely closed hollow- for time-saving installation
body vanes made of green, dyed Beilharz Anti-glare screen systems are usually
throughout low-pressure polyethylene delivered in pre-assembled 4m clusters. For
(PE-HD-HM) long transport distances, e.g. abroad, we
• High-precision manufacturing deliver our systems partly pre-assembled. In
• A high material density and the absolutely this case the vanes and vane holding devices
smooth surface require no maintenance – are already firmly connected and aligned verti-
self-cleaning effect cally. Finally, on construction site these units
• Substructures for all common types of must be clamped only with a screw onto the
guard-rails and concrete barriers square tube.
• Dimensioning regarding the protection
and visibility performance depending on
installation location and purpose
Service life
• Resistant to UV radiation, exhaust fumes,
de-icing salts and other environmental
influences
• Temperature-resistant from
minus 30°C to plus 60°C
• Dimensionally stable, impact-resistant
and shatterproof
• Long-lasting safety
For this purpose the anti-glare vanes are produced in white and
equipped with a direction-pointing reflection foil. By the use of the mark-
ing system the road user is pointed specifically and in a large-scale to
the risk situation as well he is guided safely through the traffic.
Substructure Single or Double Single Safety Single Safety Double Safety Concrete Wall 5) Holding devices for
Spaced Safety Barrier IPE-post 2) Barrier SIGMA- Barrier 4) additional substructures
Barrier 1) post 3) available 6)
Road Equipment
Vane height 300 up to 1,200 mm
special design
Vane angle standard 90°/vertical to the road axis/vane distance changeable at any time
1) 2) 3) 4) 5) 6)
Special designs for box section, Vario-Guard, Mini-Guard and other types upon request. Important note: if converting from one safety barrier type to
another, within Beilharz systems only replace the square tube holding devices and not the square tubes themselves.
For each protective device a suitable Anti-glare screen or Curve marking system
• Main components: square tube holding • Plastic vanes: the plastic vanes are • Screws and washers: all connecting
device, square tube, vane holding made of highly molecular low-pressure components are hot-galvanized and can
device, plastic vanes polyethylene (PE-HD-HM) and are be supplied in V 2 A or V 4 A design
• Square tube holding device: the most manufactured as an oval-shaped hollow upon request.
varied square tube holding devices are body which is closed at the top. The • Special Designs: Individual heights of the
fixed onto the corresponding substructure vanes are green, dyed throughout vanes from 300 up to 1,200mm can be
(usually on safety barriers). The square (special colours available) with an supplied at any time. If an order is placed
tube holding device can even adjust absolutely smooth surface. The plastic for an anti-glare screen system higher than
longitudinal differences of the substructure. vanes are fixed onto the vane holding 1,200mm, then several square tubes can
• Square tube: the hot-galvanized square device with four screws. These vanes are be mounted with the vanes arranged over
tube 45 x 45 x 2 mm and 3,960 mm spread out at the bottom. This prevents each other towards top and bottom.
long, is clamped onto the square tube from sickle-shaped distortion of the vanes • Rotatable designs (up to an angle of
holding device with only two screws. when sunlight only affects one side of the 180°) are available. Movable vane
• Vane holding device: the vane holding vane. holding devices with inclined vanes can
device is the connecting piece between • Vane Intervals: the intervals between all also be supplied in any desired angle.
the square tube and the plastic vane. This vanes with a fixed angle can be adjusted • Rotable designs (up to an angle of 180°)
holding device is clamped onto the at any time. For example, the vane are available. Movable vane holding
square tube with a screw and it can also interval in curves can be shortened and devices with inclined vanes can also be
be displaced longitudinally. extended on straight road sections. supplied at any desired angle.
Road Equipment
Installation dimension 1,000 x 500 mm
Material thickness 10 -– 11 mm
Weight 8 – 9 kg
Way of assembling overlapping joint, through which the individual Material features
• AL 1 A: Mounting on existing mesh fence, plates can be screwed together as required. • Recycled/Mixed plastic from polyolefin
without running surface, without • Colour black or dark green
backfilling possibility All guidance walls come standard with hori- • No PVC-additives or other metallic residues
• AL 1 A L: Mounting on existing mesh zontal slots for attaching the running surface. • Temperature-resistant & dimensionally
fence, with running surface, without If the running surface is not in use then the stable at -30° up to +40° C
backfilling possibility plate must be entrenched 15 cm deeply into • UV-resistant
• AL 1 B: Mounting on open field with steel the soil to prevent the amphibians from slipping • Hydrophobic – thus frost and
or plastic posts, without running surface, through these slots. If it is not possible, due to de-icing salt resistant
without backfilling possibility the ground condition, to dig the plates 15 cm • Bite-resistant against rodents
• AL 1 BL: Mounting on open field with deep into the soil, the guidance wall can be and small game
steel or plastic posts, with running adjusted by using standard tools or project-re- • Metal posts from galvanized steel
surface, without backfilling possibility lated it can be produced without any slots. • Plastic posts in U-shape UV-resistant
• AL 1C: Mounting on open field with The running surface with a width of approx.
reinforced steel posts, without running 350 mm is just hung up into the guidance wall Your benefits at a glance
surface, with backfilling possibility and fixed with 2 screws. The running surface • Guidance wall by 1-form insurmountable
• AL 1 CL: Mounting on open field with overlaps at the joints, too. The running surface • Permanent form-locked connection
reinforced steel posts, with running drops under an angle of approx. 4° outwards between guidance wall and running
surface, with backfilling possibility and the outer end of the running surface is en- surface
trenched approx. 50 mm. By the application • No passage possible due to large
*Angle hinge mounting for angles from 20° of the angle hinge the guidance walls can be overlapping joints
up to 340° for all types possible bent in any angle between 20° and 340°. • Anti-theft protection by imprinted
Therefore only one single additional part is customer branding
Mounting required for installation. Neither heavy-duty • Quick and easy installation
Mounting the amphibian guidance wall, each equipment nor road closures are necessary for • Adaptable to any terrain profile
single plate is overlapping about 80mm at the the mounting of the guidance walls. With suit- • Adaptation with standard tools possible
joints. The fixation of the guidance walls with able ground conditions up to 400 m of guid- • No road closures or heavy-duty
each other and to the steel or plastic posts (if ance walls can be installed by 2 people per equipment necessary
mounted on open field) is carried out by using working day. • Due to changes in migratory behavior
cable ties (standard polypropylene, by request of the amphibians the guidance wall can
of V2A steel) or screws. The guidance walls be demounted and re-erected
have small openings through which the cable • By request available with perforation, so
ties can be inserted and tightened from the accumulating water can drain. The
rear. In addition the individual guidance walls amphibians are reliably held back.
are equipped with 3 drilling holes at the front
The Beilharz amphibian protection fence has and environmentally friendly polyethylene syn-
been developed to maintain and strengthen na- thetic fabric. The amphibian protection fence
ture’s ecological balance. Its design was kept is easily and quickly built up in every terrain,
simple and restrained on purpose to ensure the either directly on a mesh or veterinary fence
amphibian protection fence does not interfere or on open field with a tensioning rope and
with nature and is hardly to notice once it has metal posts.
been set up. The amphibian protection fence
essentially consists of an absolutely rot-resistant
Assembly With chain links to existing fence Hot-dip galvanized metal posts at a distance of 2 m –
5 m, longitudinal tensioning rope, pegs and chain links
to hinge the fence. Experience has shown that the amphi-
Road Equipment
bian protection fence is best dug into the soil approx.
10 cm instead of simply attaching it to the ground by
nails at short intervals, because the amphibians try to
dig their way under the amphibian protection fence.
Transparency No transparency
Color Usually green, by request other colours are available. The dyeing is free of AZO-colouring (colouring ban list)
and free of heavy metals such as lead, cadmium and formaldehyde.
Tensile strength Warp approx. 323 N (DIN 53875)/weft approx. 426 N (DIN 53875)
Reinforcement at the top Polypropylene button strip dtex.1.100 multifilament, high strength; distance button holes approx. 10cm
Consistency The fabric is water-repellent and resistant to salt water, frost, acids and alkalis
High demands are made in our today’s society to parking recycling overlays. On the stable concrete bases of high
lot equipment. As a specialized company for road equip- quality exposed concrete, the coatings are firmly anchored.
ment Beilharz also offers high quality products for parking Selected materials and careful workmanship guarantee a
lots. The benches are supplied with massive wooden coat- long endurance.
ings from German Douglas or plastic recycling overlays
with steel reinforcement. The tables are supplied with ei-
ther a solid slab of granite, wooden coatings or plastic
Type Dimensionen
ca. 615 ca. 615
BM 200 H – Bench without backrest 2,000 x 420 x 795 mm
640 800
420 420
770
770
470
470
TM 200 H – Table with 3 wooden strips 2,000 x 640 x 1,155 mm
Road Equipment
325
325
385
340
TM 200 S – Table with granite slab 6 cm 2,000 x 800 x 1,110 mm
Type Dimensionen
640 ca. 615 800 ca. 615
770
770
470
470
TM 200 K – Table with 3 plastic strips 2,000 x 640 x 1,155 mm
305
305
365
340
TM 200 S – Table with granite slab 6 cm 2,000 x 800 x 1,110 mm
Type Dimensionen
540
BS 200 H – Bench without backrest 2,000 x 420 x 865 mm
420
770
470
395
585
Type Dimensionen
540
BS 200 K – Bench without backrest 2,000 x 420 x 865 mm
420
565
40 Snow fences
Beilharz snow fences: safety, stability and mobility first
The weave of Beilharz snow fences consists of a UV- and weather-resistant polyethylene fabric.
The mesh geometry ensures an optimal deposition with only a 50 % wind resistance. In connec-
tion with the highly stable supporting construction and the integrated posts a maximum of safety
is attained. On top and at the bottom integrated longitudinal tensioning ropes prevent the snow
fence from sagging. Additional advantages are the rapid installation and removal as well as the
space-saving storage.
1 2 3
4
1 Delivery in handy rolls: rapid installation
and removal, efficient storage
Winter Equipment
the ground but by a patented rope tensioning
system. If it is necessary to re-tighten the ropes,
it can be done without any problems and with-
out any time-consuming search for the pegs in
deep snow.
Snow fences 41
1 2 3
Installation
1 1 Every 4 to 6 m a base plate is hammered
in. We recommend using the standard winder
therefore.
6 7
Removal
6 Loosen the bracing ropes and lift off.
42 Snow fences
TYPES OF SNOW FENCES
Coil length 24 m 24 m 24 m 24 m 24 m 24 m
Your benefits at a glance • As the pegs can be completely ham- • Anti-abrasion strips prevent the snow
• Supporting posts integrated into mered in while installing, there is no fence mat from wearing on the galva-
the weave. bending moment on them. Despite being nized posts.
Winter Equipment
• Weave fastened to the supporting posts small and handy, they fit firmly – even on • The 4 accessories for installation and
for the entire height of the weave with ploughed fields. removal are not absolutely essential;
mat holding sheets. • Rope deflectors avoid abrasion of the however they speed up the process quite
• The cross tensioning is only carried out on galvanized surface of the supporting considerably.
one side. The other side is properly posts and protect the bracing ropes.
tensioned automatically. • On top and bottom integrated longitudi-
• Rope tensioning systems on the bracing nal tensioning ropes prevent the snow
ropes make the installation and removal fence from sagging.
and any potential re-tightening far easier. • The prevalent wind direction is unimpor-
tant while installing the fence.
OPTION
This variant is constructed identically to our proven snow fence systems – the only difference is
that the pegs are reinforced which allows an automatic driving by impacts. Of course existing
systems can be subsequently amplified. For this purpose, additional weld spots must be attached
to the existing pegs. An exact description of this process is available by request.
Snow fences 43
SNOW POLES
Out of plastic or wood
Snow poles and marking bars made by Beilharz make an continous guideline the Beilharz snow poles can be inserted
important contribution for the safety on snowy roads and as a single system directly into the ground or combined with
reduced sight by fog or precipitation. The snow pole is pri- the delineator.
marily being used where the road course cannot be marked
by the delineators due to high snow cover. To ensure a
44 Snow poles
1 2
Quality
Snow poles manufactured by Beilharz are
made of especially developed extremely UV-
and cold-resistant special plastic. The special
characteristic of this snow pole, which is made
in one piece, is the very high deformation re-
sistance with concurrent impact strength. Thus
strains of 50 newton metres for a period of
3 minutes are possible without remaining dis-
tortion. This means the snow pole made out of
3
special plastic is also way more stable than the Standard length:
other on the market available snow poles with Our snow poles made out of plastic are
an integrated cross profile. These characteris- available in the following length: 1.00 m/
tics lift off the Beilharz snow pole from other 1.25 m/1.50 m/2.00 m and 2.50 m. Of
commercial snow pole systems made out of course we produce every special length by
plastic. request.
In addition the snow poles can remain installed 1 Snow pole made out of plastic with /
year-round due to their water resistance as well without special foil.
as their UV- and ozone resistance; thus they
can also be used in summer as marking bars. 2 Snow poles made out of wood are coloured
Due to the material characteristics a rotting of black/orange-yellow – starts on top with black
the snow poles is impossible, any maintenance painted colour.
or revision is not necessary. Of course, after its
use the used material can be recycled together 3 During light irradiation the special foil ap-
with our delineators to 100 %. pears in white-silver.
Winter Equipment
TYPES OF SNOW POLES
– Snow pole continuous orange with black reflex foil (30 cm) and
impact resistant cover cap on top
– Optimal reflexion of the light by circulating reflex foil
– Diameter 50 mm
– Thickness approx. 3 mm
Within this variant a special reflex foil is being used, which appears black at daylight. Through
light irradiation at night the foil reflects the light of the vehicle and appears in silver-white. By
these special characteristics the snow pole is well visible both at day and night and therefore
an optimal guidance function for the road users and clearing services is ensured.
Snow poles 45
Configuration options
The before mentioned variants are both available without any tip, with a skew tip or with a completely closed cone tip.
All three options are also suited for the admission into a delineator. In addition you can equip the snow pole with a cover
cap to prevent from dirt or impacts.
TYPES
– Max. diameter 50 mm
– Easy hammering into the ground
– Cone tip re-usable
– No accumulating of dirt in the snow pole
Skewed tip
For quick inserting of snow poles. The ground sleeve is being mounted directly into the ground
or in a concrete foundation e.g. at traffic refuges or parking areas.
– 430 mm overall length
– Bore diameter approx. 54 mm fitting for pole diameter up to 52 mm
– Automatic lid clip coloured in red
For quick inserting of snow poles. The ground sleeve is being mounted directly into the ground
or in a concrete foundation e.g. at traffic refuges or parking areas.
– Hot-dip galvanized
– 300 mm overall length
– Bore diameter approx. 52 mm fitting for pole diameter up to 52 mm
– Optional available with cover cap
– Optional available with fixing screw for snow pole
For quick inserting of snow poles. The stand-bracket is being mounted by hammering directly
into the ground.
– Round steel hot-dip galvanized Ø 15 mm
– 2 x round pipe with inner diameter 51 mm
– 1,200 mm overall length
46 Snow poles
Delineator with triangular snow pole
The blow-molded, one-piece delineator has already a firmly integrated triangular snow pole
which is made of extremely rugged special plastic. The snow pole is simply being pulled out
when needed and automatically locks in place. By activating the unlock key the snow pole can
be simply and quickly sunk inside the delineator.
Easy extraction
Winter Equipment
sinking protection/
pull-out protection
(detend spring)
The function at a glance • By pushing the unlock key the snow pole
• To extract the triangular snow pole just can be sunk into the delineator.
pull it out of the delineator. The snow pole • Within the security variant (additional
automatically locks into place and is detent spring) the extracting or sinking of
therefore both pull-out- and theft-protected. the snow pole is only possible by using a
• The delineator-integrated guiding fixture special key.
for the snow pole is equipped with an
integrated unlock key. The guiding fixture
has a 6-point-alignment as well as several
reinforcing struts for an even higher
stability.
Snow poles 47
ROAD WORKS AND TRAFFIC RESECUREMENT
Beacons, guidance and safety barriers rail according to TL- Absperrschran-
ken 97, base plates, warning lights and mobile fence bases
The traffic volume increases on all roads and with it the number of construction sites. Each construc-
tion site runs risk of an accident, especially if it is not being secured professional. Here we have
responded quickly by launching a complete range of reliable and efficient quality products for road
works and traffic resecurement. Flexibility stands in the foreground. Even inconveniently located
construction sites are professional secured. For example by safety barriers, by warning lights or traf-
fic-routing beacons. Quick installation and removal as well as a space-saving storage of the products
are further attributes of this effective program.
2 4
4 The Reversible beacon with arrow pointing
foil changes its directional routing by turning
around.
TYPES
– Spout above 40 x 40 mm
– Spout below 60 x 60 mm
– Foil-setting by customer request
The beacons consist of UV- and ozone-resistant HD-PE plastic and are produced as a
blow-molded hollow body by default in the colour white.
– Spout above 40 x 40 mm
– Spout below twist-lock
– Foil-setting by customer request
After easy twisting into the base plate, the beacons sit stable and secure. The beacons
consist of UV- and ozone-resistant HD-PE plastic and are produced as a blow-molded
hollow body by default in the colour white.
After easy twisting into the base plate, the beacons sit stable and secure. The beacons
consist of UV- and ozone-resistant HD-PE plastic and are produced as a blow-molded
hollow body by default in the colour white.
The beacon body consists of UV- and ozone-resistant HD-PE plastic and is produced as
a blow-molded hollow body by default in the colour white.
– Height 750 mm
– Cone body blow-molded out of HD-PE plastic with large recessed grip, colour orange
– Cone base made of 100 % recycled plastic with stacking and anti-slip knobs
– Foil-setting by customer request
– According to TL-Absperrschranken
– Foil length 2.00 m
– Overall length 2.20 m
– Weight 12 kg
– Foil-setting RA1 or RA2
The safety barriers are made of UV- and ozone-resistant HD-PE plastic as
a blow-molded hollow body by default in colour grey.
Base plates with individual colouring and individual branding are available by request. They
fulfill the K1 criteria of TL-Aufstellvorrichtungen 97. By increase of the amount of base plates in
the sign stand, the weight classes K2 – K6 can be achieved.