The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels which require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes, tested according to IS 1161 and IS 4923 for chemical, tensile, yield, elongation, flattening and bend properties. Item 3 are hardware items like bolts, nuts and washers tested as per IS 1367-3 and IS 1367-6 including chemical, tensile, yield, elongation, proof, hardness and SST tests.
The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels which require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes, tested according to IS 1161 and IS 4923 for chemical, tensile, yield, elongation, flattening and bend properties. Item 3 are hardware items like bolts, nuts and washers tested as per IS 1367-3 and IS 1367-6 including chemical, tensile, yield, elongation, proof, hardness and SST tests.
The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels which require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes, tested according to IS 1161 and IS 4923 for chemical, tensile, yield, elongation, flattening and bend properties. Item 3 are hardware items like bolts, nuts and washers tested as per IS 1367-3 and IS 1367-6 including chemical, tensile, yield, elongation, proof, hardness and SST tests.
The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels which require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes, tested according to IS 1161 and IS 4923 for chemical, tensile, yield, elongation, flattening and bend properties. Item 3 are hardware items like bolts, nuts and washers tested as per IS 1367-3 and IS 1367-6 including chemical, tensile, yield, elongation, proof, hardness and SST tests.