MECHANICAL MAINTENANCE

EXAM
Name: ……………………………………………………………….. Date:………………………. SCORE:
Read the instructions carefully.
1. Complete the gaps according to the definitions given. It´s about Turning Hand Tools. (3 marks)

a. An …………………………………. has jaws so it can be fitted to a head bolt or nut from the side.
b. A ……………………………………… has an open-end wrench on one end and a box-end wrench on the
other end.
c. A ………………………………………. May have 6 points, the exact shape of the nut or it may have 12
points.

2. Write the name of the HANDLES according to the pictures. (3 marks)

A. …………………………………. B. ……………………..………… C. …………………………………..

3. Complete the gaps with the words given in the box. (4 marks)

Universal Joint Extension Hinge Handle Adapter

a. An ………………………………….. resembles on extension but its purpose is to let a person use one
square drive socket with a handle that has a different size square drive.
b. An ………………………………… is put between the socket and the handle when it is difficult to reach a
nut or bolt.
c. A …………………………………… is jointed so that it can be used at any angle.
d. A ……………………………………is constructed so it will turn freely and apply force at all angles.

4. Draw an open-end wrench and write the main parts on it: jaws and handle. (4 marks)

Lic. Yula Ugas Bardales

5. Complete the following statements. Write the missing words or phrases in the spaces
provided.

T-bar long fraction speed box-end inch

short Ratchet medium

a. The small bar on the …………………………..handle may be moved from one side to the other.
b. The socket wrench is similar to a ……………………………. Wrench.
c. Extensions usually come in three sizes: ………………………………….. , ……………………………… and
………………………… .
d. The ………………………….. handle is useful when the nut or bolt must be turned a large number of
times.
e. The ………………………….. handle is probably used more often than the others.
f. Socket wrench sizes are stated in …………………………….. of an ………………………. .

Lic. Yula Ugas Bardales