Professional Documents
Culture Documents
Testing Manual For UPS Power Battery Back
Testing Manual For UPS Power Battery Back
1.) Connect the Battery source of the UPS (Note: you cannot test the device without the connection
of the Battery, it is for the safety purposes of the device )
Note: remember when you are done with the testing; make sure to disconnect again the
battery connector to prevent the discharging on the battery of the device.
2.) Test each output of the device with multitester Voltage output na walang supply and nakapatay
yung device
3.) Test each output of the device with multitester AC Output na may supply and naka on ang
device
4.) Test each output of the device with multitester AC Output na walang suppy and naka on ang
device