Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    03.FLS WHT 5701

    Uploaded by

    Jigar Jain
    This technical drawing shows the dimensions of a cylindrical part with cutouts and holes. It has a diameter of 425mm on the top and bottom faces with a height of 195mm. There are two cutouts of 130mm diameter and 45 degree angles located symmetrically. Four holes of 16mm diameter are placed evenly around the outer edge and one central hole of 70mm diameter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    You might also like

    03.FLS WHT 5701

    Uploaded by

    Jigar Jain
    27 views1 page
    This technical drawing shows the dimensions of a cylindrical part with cutouts and holes. It has a diameter of 425mm on the top and bottom faces with a height of 195mm. There are two cutouts of 130mm diameter and 45 degree angles located symmetrically. Four holes of 16mm diameter are placed evenly around the outer edge and one central hole of 70mm diameter.

    Original Description:

    Original Title

    03.FLS-WHT-5701

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This technical drawing shows the dimensions of a cylindrical part with cutouts and holes. It has a diameter of 425mm on the top and bottom faces with a height of 195mm. There are two cutouts of 130mm diameter and 45 degree angles located symmetrically. Four holes of 16mm diameter are placed evenly around the outer edge and one central hole of 70mm diameter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    27 views1 page

    03.FLS WHT 5701

    Uploaded by

    Jigar Jain
    This technical drawing shows the dimensions of a cylindrical part with cutouts and holes. It has a diameter of 425mm on the top and bottom faces with a height of 195mm. There are two cutouts of 130mm diameter and 45 degree angles located symmetrically. Four holes of 16mm diameter are placed evenly around the outer edge and one central hole of 70mm diameter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    FLS-WHT-5701

    555 555
    EQ EQ

    16

    130

    425
    Ø45

    425
    25

    BOTTOM VIEW
    TOP VIEW

    425
    25
    195

    170

    Ø70

    SIDE VIEW

    ALL DIMENSIONS ARE IN MM.


    (TOLERANCE ± 5 MM)

    You might also like