Notification
1. Please use the built-in SV 2A power, other power sources could result in equipment.
damage.
2. The network cable over 100 meters will affect the video data transmission, an
intermediate switch is needed to install if possible.
3. When using the wifi,the transmission distance can reach 100 meters in the open
area, While such as walls or obstacles, the signal cannot exceed two walls,
4, This product does not have lightning protection fuetion, when needed lightning
protection,
should be required to install the lightning protection equipment.
5. Device working environment should be at temperature:0
°C humidity:20%---80% with no frozen.
Zoom Outdoor Dome Camera illustration installation steps:
1, Open the packing box, and take the camera out of the box.
2. Check the accessories: Bracket?,Power adaptor?, Wi-Fi Antenna?, CD?,
Drier?,Network cable?, Zoom Outdoor Dome Camera TF Card Installation
Procedure Manual?
3. Make sure the wall position you have installed to let the Wi-Fi able to properly
connect to your router. You can use the phone to search Wi-Fi in advance to test
whether the signal good or not.»
4. Make sure the screw holes position A1, A2, A3, A4 on the wall according to
the dimensions as below (below picture size 1:1) :Al AQ
46,5 50,5
5. Put wall plugs into the wall after the first step:
AEN Gaited
TRAYS
6. Take out the IP camera from box, keep the lens upward, both hands hold the
rectangular box set, and then unload the frame set.7. There are four screw holes after the frame set unloading.
8. Then let the 4 screw holes on IP camera base aim at the wall plug on the wall
and let them in. It is finished to press the rectangular frame set.Watching Instructions
1. After installation, turning on the 5 V/2A power by connecting the
corresponding power plug and connecting the network cable.
TP CAMERA
Pevar sdaptor2. Self-check the lens, turn up and down, long green light and yellow lights
flashing.
3. Three watching way: IE browsing, Control Software browsing, IOS and
Android Mobile Phone browsing.
@ IE Browsing: Browsing on the PC comes with CD data, open the search
tool.
Pe toot 3.5 oe
The search tool will display the current LAN machine IP (sometimes it will show an
unmatched subnet mask selection. Clicking on the button to modify the unmatched IP
would be OK.)
[encecenenneven]
Double-click on the machinedfi IP and it will popup a login interface, enter default user ?
‘admin?and an empty password to enter the page, download and install the plug-ins,
select the Livestream mode (for IE). You can enter to see the video and operate the
‘camera.
® Control Software browsing: Browsing on the PC comes with CD data, open the
installed document#¥eviceClient and install it as per tips. It will appear this icon on.your desk when finish
Open the icon to run the program. ( It needs
compatibility running under Windows7, right click on the icon to select ‘Fompatibility
Troubleshooting? select Recommended Settings?and then start the program).
Enter the software interface, click device list to open search interface and you can search
the LAN ( Local Area Network) IP. It will pop up device information dialog box after
double-click IP. Select H.264 main code stream on the code flow options and then close
the dialog box and return to the software interface. The added machine will be showed on
the device list and then drag it to the blogs you can watch the current camera video.
@® 10S and Android Mobile Phone browsing download website:
htto:/itunes.apple.com/en/app/ipeamp2p/id5552738847mt:
Or search 7IPCamP2P7?in app store. Copy directly from Android Software CD-ROM to
mobile phone and install. Connect your mobile WIFI with current camera wireless router.
Enter the software click }8ldd new camera? input device ID or search LAN camera or scan
the two-dimensional code of current camera LAN, click jidinish?to return the camera list.
And then select the added camera to view and operate the interface.