Plot No 234,1 1th Main 3rd.
M.E.FORGE TECH
Cross ,3rd Phase
Peenya Industrial Area
Bangalore-560 058
TEST CERTIFICATE
‘TC No:479dated :20,07.2020
Inv No:_dated :20.07.2020
(Customer :M/s B FOURESS (P) Limited Type of forging: Ring Rolling
Plot No.7,KIADB Industrial Area [Component —:Clamping Ring Forging
Hosakote-562114 BFVO81613100 D775/1D658x26
P.O Refi538/MMY/64801/30.06.2020 7
|W.O:No:81479 Reduction Ratio 4:1 laty 02 Nos
[Raw Material De 3. Test Cetificate No, :8259
|1.Make :JCAPL 4, Specification : ASTM A473 Gr410 QPSI8 CIA
J2. Size _:Sqr200 mm 5, Heat No/Batch No._:C8259/4604
‘Chemical Analysis in Percentage.
€ Ma Si S P Ni cr Mo
[AS per spec Min, - Z = ~ = 11.50 [=
JAS per specMax. |" 0.15 | 1.00 | 1.00 | 0030 | 0.040 0.75 [13.50 | =
[Obtained 0.10 [0.490 [0.430 | 0018 0.016 [0.110 _[ 12.250
HEAT TREATMENT
Process ‘Temperature Deg Soak timers Cooling media
Normalising 980 400 Air
Mechanical Properties at Room Temperature
[yS_ [TS [%Blong [%Red [Hardness in BAN
[Nimm2_[N/mm2 GL =4d fin Area | . Min, 220
275 [485 [30 Max 240
Obtained
rest value 693.34 | 7302 [25.94 229,229,220BHN
NDT - Ultrasonic Testing
[Condition of Surface
[Testing standard
|Acceptance level
Inference : Found satisfactory,
Identification Details MEFT/ SS 410// Sizes Marked on all Components
[We hereby certify that the items mentioned above has been tested and inspected in our presence and are Tound to be ia
accordance with the drawings and satisfy the requirements of the specifications,M.E.FORGE TECH
Plot No 234,11th Main 3rd Cross ,3rd Phase
Peenya Industrial Area
Bangalore-560 058
ULTRASONIC INSPECTION REPORT
Range of CRT
Technique
[Scanning
Procedure
Reference Block
Settings
Approved By
IREPORT No: —_479UT/DE: 18.07.2020
Tested Date: 17.07.2020
Customer: _: M/s B Fouress(P) Limited
P ONO 1 538/MM/64801 DT 30.06.2020
Name of part: : Clamping Ring
BBFV0816131000 076/1D658X26-2 Nos
[Material Specification ASTM A473 Grai0 - QP 516 CLB
[Surface Condtion Proof Machined Annealed
Equipment Einstein | TFT
Transducer size &Fregency : Dia 10mm,20mm - 2 MHz Normal
:0-200mm
Pulse Echo
Manual Couplant Used ‘Ol,
: ASME SEC 5 SA-388
llw BLOCK ‘Acceptance Std ‘As per 3mm FBH
8446 dB
Observed and Remarks: No recordable indications Observed
Identification : MEFT/SS410/ Sizes on the component
ACCEPTEDME. FORGE TECrE
Plot No 234,1 1th Main 3rd Cross ,3rd PhasePeenya Industrial Area Bangalore-560 058
MAGNETIC PARTICLE EXAMINATION REPORT
IREPORTREPORT No: ATSUTIDE: 18.07.2020
Tested Date: 17.07.2020
CustomelCustomer _:_: Mls B Fouress(P) Limited
IP. ONO _|P ONO 538/MM/64801 DT 30.06.2020
Name of| Name of part: Clamping Ring
BFV0816131000 D775/ID658X26-2 Nos
Material Specification: ASTM A473 Gr410 QP518
Requirement MPI
Equipment Used Magna Flux Yoke Type
Type of Current DC/AC.
Type of Magnetization ‘Non Fluorescent Black Powder - Kerosene Base.
Pole Spacing 4.6"
IMagnetisation Technique :Yoke
Methode of Exam :Continuous &Wet Method
Procedure ‘ASTM E709
Acceptance Std ‘ASTM E125
| TEST RESULT
|Under the above conditions of testing, No Relevant indication observed. AcceptedME. FORGE THECE
Plot No 234,1 1th Main 3rd Cross ,3rd PhasePeenya Industrial Area Bangalore-560 058
DYE PENETRENT PARTICLE EXAMINATION REPORT
REPORT No: —479UT/Dt: 18.07.2020
Tested Date: 17.07.2020
Customer _—:_: Mls B Fouress(P) Limited
P ONO 538/MM/64801 DT 30.06.2020
Name of part Clamping Ring
BFV0816131000 D775/ID658X26-2 Nos
Material Specification: ASTM A473 Gr410 QP518
Requirement D.P.Testing
Chemical Used ‘Orion, 115PR,115P,115D,
Make The Oriental Chemicals
IMethode of Exam ‘Manual
Procedure "ASME SECS SE165,
Acceptance Std :OP-518
TEST RESULT
Under the above conditions of testing, No Relevant indication observed. Accepted
Gstepy
Bea
CUT,MPT,LPT
nNwe
Quantum Analytics
#927143, 9h Mein, Sr Frese,
Poona instil Aa,
Bangolore-560 058,
Ph: 080.4113 6901
; EmaD: enaury@quertanoneivics.coin
Quantum Analytics Weoste wovqvankimonaies. cin
TEST REPORT
arnne -10531020000003692F
ME FORGE TECH.,
Plot No. 234, 11" Main, 3 Cross, 31 Phase, Report No. ben RE/2020/07/ 0428
Peenya Indl Area, Bangalore - 560058. Sample Booked Date + 10/07/2020
Analysis Start Date : 11/07/2020
Analysis Completed Date 11/07/2020
Date of Report 11/07/2020
Page No lofi
Sample particulars : Instrument Used UTM
Description : Material: A473 Gr.410, Drg Make FIE
No, BKV-08-16-13/5351605,
Heat No. /Batch No.
8259/4604
Job Order No: QA/20G0231 ‘Model/Serlal No UN ~ 20/6/79-253
DC No MBFT/QA/2020/0 Capacity 20 Tons
DATE 10.07.2020
st j i? LIMITS ASPER |
NO. | TEST PARAMETER _ eS | ASTMA473-01-2009 TEST METHOD.
1 _| Carbon as C “ 7
2__| Silicon as Si
3__| Manganese as Mn 0.49
Is 9879 - 1998
4 _| Phosphorus as P 0.016 dl any
5 | Sulphuras 0.018
6 | Chromium as Cr 12.25 115-135
7__| Nickel as Ni on 0.75 Max
Remarks: The sample meet the chemical requirement as per ASTM A473-01-2009, Grade. 410
ication with respect to above tested parameter
“Bnd of the Report***
auhioi eatery
will be sloted for @ period of one
Note : 1. The results sted above pertain only fo the tested samples and applicable parameters. 2, Samples wil be stored for a period o
month Unless oferwise speciied. 3. Ths repo! Is not be reproduced either whely or in part and cannot be used on evidence in the
‘court of law and should of be used in any advertising media without prior written persmission. 4, Sampling
19 not done by us, unless specified.
(QF033/Ro/ Dt 01.03.2020,Quantum Analytics
# 92/143, 9h Mein, ic Phase,
Poona Industial Area,
‘Bangalore-560 058,
Ph: 080.4113 6901
EmallD : enquty@auantananaiic. col cheat ty,
Quantum Analytics ‘Website wwquanturanaiyies coin CoMiesta ne
e and address of the customer "710631020000003693F
ME FORGE TECH. TEST REPORT
Plot No. 234, 11 Mairt, 3 Cross, 3" Phase, Report No. BE /2020/07 /0529
Peenya Indl Area, Bangalore ~ 560058. Sample Booked Date Tojor}acao.
Analysis Start Date : 10/07/2020
Analysis Completed Date |: 10/07/2020
Date of Report 11/07/2020
Page No loft
Sample particulars : Instrument Used um
Material: A473 Gr.410, Dg Make FIE
Description
No. BKV-08-16-13/5351605,
Heat No. /Batch No.
8259/4604
Job Order No : QA/20G0232 Model/Serial No UTN ~ 20/6/79-253
DC No MEFT/QA/2020/0 Capacity 20 Tons
DATE 10.07.2020 Instrument Calibrated on 26.05.2020
Instrument Next Due Date : 27.05.2021
a LIMITS AS PER
No. TEST PARAMETERS RESULTS: ASTM _A473-01-2009 TEST METHOD
fe ____ Grade. 410 H
i Diameter mm 12.56 sit
2 | Initial Area, mm? . 123.949), beet
3 | Initial Gauge Length, mm so lipase
4 | Final Gauge Length, mm 62.97 a
7 IS 1608 ~ 2005
5. | Yield Load, KN 85.940 = Mert
6 | Yield Strength, N/mm? 693.348 275 Min
+ Ultimate Tensile Load, KN 90.510
8 Ultimate Tensile Strength, N/mm? 730.218 485 Min
9 % Elongation 25.940 20 Min
Remarks: The sample meet the mechanical requirement as per ASTM A473-01-2009, Grade. 410
specification with respect to above tested parameter
wesley
‘End of the Report***
EWG
Note : 1. The results sted above pertain only to the tested samples and applicable parameters. 2. Samples wil be stored for a period of one
thonth unless otherwise speciiied. 3. This report ig not be reproduced ether wholly or in part and cannot be ued on
‘Court of low ond should ot be used in any advertising media without prior witlen persmission. 4. Sampling not done by us. unless specified:
evidence in the
‘GFOSS/RO / Dt. 01.03.2020,Quantum Analytics
# 92/143, Min ed Ph
: enya Industial eo,
‘Bangalore 540 058.
Ph 080 4113 6901
moO: enquly@quortumanivics 01" Aenean
Quantum Analytics Website: wirnquartumanaivics.coin "Tears
TEST REPORT
Name and address of the customer Seas 17¢631020000003694F
‘ME FORGE TECH.,
Plot No. 234, 11% Main, 3 Cross, 31Phase, Report No. 2_-RE/2020/07/0590.
Peenya Indl Area, Bangalore - 560058. Sample Booked Date 20/07/2020
Analysis Start Date : 10/07/2020
Analysis Completed Date: 10/07/2020
Date of Report : 11/07/2020
Page No : Loft
Sample particulars : Instrument Used 2 UlM
Description: Material: A473 Gr.410, Drg_ Make : IE
No. BKV-08-16-13/5351605,
Heat No. /Batch No.
8259/4604
Job Order No QA/20G0233 Model/Serial No : UTN-20/6/79-253
DC No MEFT/QA/2020/0 Capacity : : 20 Tons
DATE : 10.07.2020 Instrument Calibrated on: 26.05.2020
Instrument Next Due Date : 27.05.2021
a LIMITS AS PER
: TEST TRIALS | RESULTS | ASTM A473-01-2009 | TEST METHOD
io.
q Grade, 410
b 229 i
Hardness (HBW) Ball
1 Dia 10mm, Load @ 2 229 220 - 240 IS 1500 (P1) 2013
3000 kg -
Average 229
Remarks: The sample meet the hardness requirement as per ASTM A473-01.2009, Grade. 410
specification with respect to above tested parameter
+#End of the Report***
resbeeny nbroseb¥SRbtory
- 1 will be sored for a petiod of one
Hole: 1 Te resus sted above pertsin ony fo the tested samples and applicable parameter. 2: Sompies
wore nes otherwise spectied. 3. Tis repod is nol be reproduced eer whol ot In part cnd cannot Be ‘used on evidence In the
or ing media ‘writen perimision. 4, Sampling not done by us, unless specified.
Court of law and should of be used in any advertising media without prior writen Bs by us nl pected.