Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

CHEMICAL INJECTION SKID

FOR OIL AND GAS INDUSTRY

BY
ViENERG Resources Pvt Ltd
MAIN FEATURES AND SPECIFICATIONS

Chemical injection Skid are designed to inject accurate


amount of various chemicals into process flow lines at a
required pressure continuously or at irregular intervals
SKID STRUCTURE

A Skid is basically a steel flat structure built to carry tank,


pump, motor, valves, instruments and related auxillaries.
The base structure of a skid is integerated with drip pan to
collect the drained chemicals.
CHEMICAL STORAGE TANK

The chemicals are stored in skid mounted single or


multi-compartment tanks. Storage tanks are
constructed in horizontal cylindrical or vertical
cylindrical with flat dished bottom and top. Tanks are
provided to store the chemicals , injected in the
process lines. The external effects such as heat, cold,
pressure, and vaccum may impact the tank ability to
hold and maintain the viability of both the chemicals
and container
DOSING PUMP

The Heart of any chemical injection skid is Dosing


Pumps. It is the source of a skid for generating
pressure and flow
VALVES AND INSTRUMENTATION
 For Safe operation each chemical injection skid is
provided with set of valves and instrumentation
depend on their different applications. Normally
each skid is provided with Pressure transmitters,
flow meters, level gauge,pressure gauge etc..

 Level Gauge indicates level of the chemical inside


the tank. Level transmitter for continuous
monitoring the level of chemical is too low or high,
to avoid the damage of pump..
 Calibration pot is installed in the suction line to
calibrate the chemical injection flow rate. Suction
Pressure gauge helps to detect the low pressure.
Discharge pressure gauge and pressure relief valve
helps to protect the piping line from over
pressurization.

 Pressure transmitter helps to identify pump


performance and also system integrity.Check
Valves help to protect the chemical injection skid
from any back flow. Flow Meters help to measure
the flow rate of chemical injection
ELECTRICAL

All signals are terminated in the mounted junction


boxes. All controls like pump running local / remote
indication, local on / off push button of the motor,
remote on/off push button of the motor, emergency
stop of the complete process system and any other
controls can be implemented from the local control
panel.
APPLICATIONS

 Corrosion inhibitor chemical injection skids are used


to inject appropriate corrosion inhibitor chemicals
into the system at regular interval,to minimize
corrosion of high valued equipment and helps for
extended life. It is used to inject chemicals in major
equipments such as Heater Treater and Desalter.

 A Scale Inhibitor Injection Skid to minimize formation


of scale in Heaters / Desalters. Scaling will reduce
performance efficiency of equipment and plant
production.
 A Demulsifier Injection skid to Breaks down oil
emulsions to aid oil/water separation. In heavy
crudes it is very difficult to separate oil and water.
This skid is used to inject the chemicals for de-
emulsification which inturn enhance the separation
of oil and water.

 Antifoam chemical injection skids are used to inject


antifoam chemicals into the test separators to
minimize foaming formation and maintains clean
flow of liquids and improves separation efficiency ,
Foaming will cause erratic readings which will
reduce system performance and ultimately affect
the production
THANKS FOR VIEWING

FOR MORE INFORMATION ,ABOUT THE PRODUCTS


OF OIL AND GAS INDUSTRY VISIT OUR WEBSITE

WWW.VIENERG.COM

You might also like