Professional Documents
Culture Documents
API-571-Study-Guide Done
API-571-Study-Guide Done
API-571-Study-Guide Done
1. A brittle fracture:
a) is caused by stress cycles.
b) is always the result of thermal stresses.
c) grow very rapidly with minimum deformation prior to failure.
d) grows slowly and is dependent on time and stress.
3. ASME Section VIII had few limitations concerning brittle fracture prior to:
a) 1955.
b) 1962.
c) 1973.
d) 1987.
5. Which of the following is not a critical factor that contributes to a brittle fracture?
a) The material’s fracture toughness
b) Maximum operating temperature
c) Stress concentration at a flaw
d) Magnitude of the residual stresses
5. Which of the following is not a primary initiating point for thermal fatigue?
a) Notches
b) Rounded pits
c) Nozzle-to-shell welds
d) Weld toes
4. Which of the following does not increases the likelihood of atmospheric corrosion?
a) Bird poop
b) Increasing annual rainfalls
c) Locations where moisture is trapped
d) Increasing operating pressures
e) Increasing amounts of airborne contaminates
6) Atmospheric corrosion:
a) can cause either uniform or localized wall loss.
b) always causes localized wall loss.
c) always causes uniform wall loss.
d) is best detected using profile RT.
3. Fatigue will not occur in carbon steel if stresses are below the:
a) transition limit.
b) endurance limit.
c) hardening limit.
d) speed limit.
8. Mechanical fatigue can cause cracks that initiate from the surface and often form a:
a) clam shell appearance.
b) snail shell appearance.
c) turtle shell appearance.
d) Shell Oil shell appearance.
e) taco shell appearance.
Sulfidation (4.4.2)
1. Which of the following is not a major factor associated with corrosion by sulfidation?
a) Alloy composition
b) Operating pressure
c) Operating temperature
d) Sulfur content
5. What method is most used to assure boiler feed water corrosion is not occurring?
a) Spot UT readings at turbulent areas
b) Profile RT at turbulent areas
c) Profile RT at stagnant areas
d) Laboratory analysis of boiler feedwater
Answer Key