The document describes an industrial screened modular connector that meets or exceeds category 6 compliance standards. It has a rugged housing suitable for harsh environments, bayonet style mating with redundant gaskets for an IP66/IP67 seal. It supports up to 250MHz, allows mass termination of all cable pairs, and meets various international standards for transfer impedance and shield effectiveness. The connector provides backwards compatibility, supports common wiring standards, and allows over 200 terminations without signal degradation.
The document describes an industrial screened modular connector that meets or exceeds category 6 compliance standards. It has a rugged housing suitable for harsh environments, bayonet style mating with redundant gaskets for an IP66/IP67 seal. It supports up to 250MHz, allows mass termination of all cable pairs, and meets various international standards for transfer impedance and shield effectiveness. The connector provides backwards compatibility, supports common wiring standards, and allows over 200 terminations without signal degradation.
The document describes an industrial screened modular connector that meets or exceeds category 6 compliance standards. It has a rugged housing suitable for harsh environments, bayonet style mating with redundant gaskets for an IP66/IP67 seal. It supports up to 250MHz, allows mass termination of all cable pairs, and meets various international standards for transfer impedance and shield effectiveness. The connector provides backwards compatibility, supports common wiring standards, and allows over 200 terminations without signal degradation.
Be independently verified for category 6 compliance
Be available in both metal and chemical-resistant, industrial-grade thermoplastic housings for protection in harsh and punishing environments Have bayonet style mating with redundant gaskets to ensure proper plug depth and provide an IP66/IP67 rated seal Have an expanded operating temperature range of -25°C (-13°F) to 85°C (185°F) Utilizes technology with optimized pair balance design and linear crosstalk response to address applications up to 250 MHz. Allow for all 4-pairs of the cable to be mass terminated utilizing a pair of parallel jaw pliers. Exceeds ISO/IEC 11801 2nd edition and EN5O173 2nd edition requirements for transfer impedance and shield effectiveness. Allow termination with a single conductor impact tool Be backwards compatible to allow lower performing categories of cables or connecting hardware to operate to their full capacity Support industry standards for T568A or T568B wiring options on each individual outlet Allow for a minimum of 200 terminations without signal degradation below standards compliance limits Have protective dust caps to protect any unused outlets or seal an outlet during wash down periods when the outlet and plugs may be disconnected. Must be certified by Underwriters Laboratories to United States Standards and C22.2 Canadian Telecommunications Standards Meet the following performance specifications:
Margin over category 6 @ 250MHz
Parameters Worst Case Typical Insertion Loss (dB) 0.12 0.14 NEXT* (dB) 0.84 4.37 FEXT* (dB) 2.1 5.1 Return Loss (dB) 6.9 8.3 * Tested in both Differential and Common modes Siemon Screened Industrial MAX 6 Modules Recommended