Professional Documents
Culture Documents
Bosch Gas-15-L - Manual
Bosch Gas-15-L - Manual
English | 9
10 | English
f The vacuum cleaner contains materials that f Remove the dust bag and empty the con-
are hazardous to one’s health. Have the tainer before wet vacuuming.
emptying and maintenance, incl. the dispos- f The vacuum cleaner has a blower function.
al of dust-collection containers, carried out Do not blow the outgoing air randomly in
only by specialists. Appropriate protective enclosed areas. Use the blower function on-
equipment is required. Do not operate the ly with the a clean hose. Dusts can be haz-
vacuum cleaner without the complete filter ardous to one’s health.
system. Otherwise there is danger to your
f After vacuuming, remove the folded filter to
own health.
prevent the forming of mould and allow it to
f Before restarting, check the proper condi- dry thoroughly; especially before using it
tion of the vacuum hose. When doing this, for dry vacuuming.
leave the vacuum hose mounted to the vac-
f Operate the vacuum cleaner only with the
uum cleaner to avoid dust from coming out.
folded filter mounted.
Otherwise, you could possible inhale dust.
f A socket outlet with earthing contact is in-
f Do not use the vacuum cleaner as a seat.
tegrated in the vacuum cleaner. An external
The vacuum cleaner could become damaged.
power tool can be connected there. The
f Use the mains cable and the vacuum hose vacuum cleaner is automatically put into op-
carefully. Other persons could be harmed. eration via the power tool. Observe the
f Do not clean the vacuum cleaner with a wa- maximal allowable load of the connected
ter jet pointed directly at it. The penetration power tool.
of water into the vacuum cleaner lid increas- f The vacuum cleaner may not be used as a
es the risk of an electric shock. water pump. The vacuum cleaner is intended
Products sold in GB only: Your product is fitted for vacuuming air and water mixtures.
with an BS 1363/A approved electric plug with f Wipe out the container from time to time
internal fuse (ASTA approved to BS 1362). with a commercially available, non-scouring
If the plug is not suitable for your socket outlets, cleaning agent, and allow it to dry.
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the Symbols
same fuse rating as the original plug. The following symbols are important for reading
The severed plug must be disposed of to avoid a and understanding the operating instructions.
possible shock hazard and should never be in- Please take note of the symbols and their mean-
serted into a mains socket elsewhere. ing. The correct interpretation of the symbols
Products sold in AUS and NZ only: Use a resid- will help you to use the vacuum cleaner in a bet-
ual current device (RCD) with a rated residual ter and safer manner.
current of 30 mA or less.
Symbol Meaning
Additional Safety and Working GAS 15 L:
Instructions All-Purpose Vacuum Cleaner
English | 11
Reaction direction
Switching On
Delivery Scope
All-Purpose Vacuum Cleaner (see figure 1)
Switching Off A complete overview of accessories can be
found in our accessories program.
Remote automatic switching
12 | English
Intended Use The values given are valid for a nominal voltage
[U] of 230 V. For different voltages and models
The machine is intended for collection, vacuum- for specific countries, these values can vary.
ing, conveying and separation of non-flammable
Please observe the article number on the type
dry dusts that correspond with the general ex-
plate of your vacuum cleaner. The trade names
position limit value of > 1 mg/m3, such as dusts
of the individual vacuum cleaners may vary.
of mineral materials with aluminium hydroxide,
graphite dusts, aluminium dusts, paper dusts,
soot dusts, powder paint dusts, polyurethane Declaration of Conformity
dusts, GFRP dusts based on epoxy resin (see
We declare under our sole responsibility that
manufacturer’s data sheet on safety), CFP dusts
the product described under “Technical data” is
based on epoxy resin (see manufacturer’s data
in conformity with the following standards or
sheet on safety), varnish dusts without carcino-
standardization documents: EN 60335 and the
genic components, wood dusts and non-flam-
directives 2006/42/EC, 2004/108/EC including
mable liquids and water-air mixtures. The vacu-
their amendments.
um cleaner is dust-technically checked and
corresponds with dust category L. Technical file at:
Robert Bosch GmbH, PT/ESC,
The vacuum cleaner has a blower function, e. g.
D-70745 Leinfelden-Echterdingen
for drying surfaces.
The vacuum cleaner has a socket outlet with re- Dr. Egbert Schneider Dr. Eckerhard Strötgen
mote automatic switching for connection of a Senior Vice President Head of Product
power tool with extraction function. Engineering Certification
English | 13
14 | English