Professional Documents
Culture Documents
All Metal Hose, Medium Pressure, FJ Sereis (MS-02-322-E) R2
All Metal Hose, Medium Pressure, FJ Sereis (MS-02-322-E) R2
com
A ll-Metal Hose
Medium-Pre ssure
FJ Se r ie s
■ 316L stainless steel core with 304 stainless steel overbraid
■ For vacuum and positive pressure service up to 1600 psig (110 bar)
■ End connections welded in accordance with ASME Boiler and Pressure Vessel Code Section IX
■ Wide variety of fractional and metric end connections from 1/4 to 2 in. and 6 to 38 mm
Features
Technical Data
Working DO NOT SUBJECT
Minimum METAL FLEXIBLE HOSE
Hose Pressure at Minimum
Bend Radius➀
Nominal Series Temperature –325 to 300°F Burst at TO SYSTEM PRESSURE
in. (cm)
Hose Size and Size Range (–200 to 148°C)➁ 70°F (20°C) SURGES, SHOCK, OR
in. (mm) Designator Static Dynamic °F (°C) psig (bar) psig (bar)
PULSATIONS GREATER
1/4 (6.4) FJ4 0.75 (1.90) 4.33 (11.0) 1600 (110) 6400 (440) THAN 50 % OF THE
3/8 (9.5) FJ6 0.87 (2.21) 5.91 (15.0) 1470 (101) 5880 (405) WORKING PRESSURE
1/2 (12.7) FJ8 1.04 (2.64) 6.50 (16.5) 1110 (76.4) 4440 (305) RATING.
3/4 (19.0) FJ12 1.61 (4.09) 8.86 (22.5) –325 to 800 860 (59.2) 3440 (237)
1 (25.4) FJ16 1.89 (4.80) 10.2 (26.0) (–200 to 426) 680 (46.8) 2720 (187)
1 1/4 (31.8) FJ20 2.16 (5.49) 11.8 (30.0) 680 (46.8) 2720 (187)
1 1/2 (38.1) FJ24 2.33 (5.92) 13.4 (34.0) 520 (35.8) 2080 (143)
2 (50.8) FJ32 3.10 (7.87) 15.4 (39.1) 450 (31.0) 1800 (124)
➀ Measured to center line of bend.
➁ Working pressure ratings based on ISO 10380.
Custom Assemblies
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Hose Series and Size See following tables. Must be in whole number
See following tables. increments.
Examples: SS-FJ4TA4SL4-28F
SS-FJ4TA4SL4-100CM-F