Working Pressure➀ Ordering ID OD at 70˚F (20˚C) Tubing with Swagelok HC Connector Number in in psig bar Standard Wall LT-2-4 1/8 1/4 40 2.7 LT-3-5 3/16 5/16 30 2.0 LT-4-6 1/4 3/8 25 1.7 LT-6-8 3/8 1/2 15 1.0 LT-8-10 1/2 5/8 10 0.68 Thick Wall Vacuum LT-4-10V 1/4 5/8 used in vacuum service over LT-6-14V 3/8 7/8 entire temperature range ➀ Pressure Ratings based on tubing used with a hose connector and secured by a clamp or a Swagelok tube fitting/insert
Factors used to determine vinyl tubing
Tubing with metal Insert for use in Swagelok tube fitting pressure ratings at elevated temperatures To determine allowable pressure at elevated temperatures, Features find the working pressure from the ordering ■ Handles a wide variety of laboratory chemicals Information/Pressure Ratings table. Temperature ■ Soft and flexible for easy routing, bending, and installation Multiply this by appropriate Factor ˚F ˚C ■ Clear—lets user view system fluid Factor shown. 80 26 0.96 ■ Thick-wall tubing can be used in vacuum service over entire Example: LT-4-6 Tubing at 120°F 100 37 0.80 temperature range A. Working pressure is 25 psig 120 48 0.60 B. Factor for 120°F is 0.60 140 60 0.40 160 71 0.21 The allowable working 165 73 0.16 pressure is 15 psig at 120°F.
Additional information on Swagelok hose connectors and hose
clamps can be found in Hose/Quick-Connects subsection. Swagelok tube fittings and Inserts can be found in the Fittings subsection. Caution: Avoid kinking and periodically check tubing for damage.
Safe Product Selection
When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.