Professional Documents
Culture Documents
Im582136800-Netsure-502-Full-System - (Dragged) 2
Im582136800-Netsure-502-Full-System - (Dragged) 2
There are optional AC cord brackets available that allow the AC cords to be supported. Below are the steps for
attaching the brackets and tying the AC cords to the brackets. Skip to Step #3 if your power system comes
with the brackets already attached.
Procedure
1. Locate the position to mount the bracket on the back side of the relay rack. The bracket should be 1RU
below the power shelf. See Figure 12.
Figure 12: AC Cord Bracket Location.
Vertiv | NetSure -48 VDC Power Systems Installation Instructions (Section 6025) | Rev. X 23