Professional Documents
Culture Documents
Axis - Error - Apportionment - Estimator - XLS: Based On Linear Sum of Errors
Axis - Error - Apportionment - Estimator - XLS: Based On Linear Sum of Errors
Axis - Error - Apportionment - Estimator - XLS: Based On Linear Sum of Errors
xls
To apportion errors between types and axes. By Alex Slocum, last modified AHS 2014.04.09
Enter numbers in BOLD, Results in RED
Number of axes, N 3
Total allowable error, dtot (micron 100 what the customer wants from their machine
Apportion of error within each axis (amount allocated t
Y, Z directions) to be determined by sensitive dire
Bearings (fb) Structure (fs)
Factor Apportion of Apportion of
Source of error (f) error (dtot/f) error per axis 1 0.1
Based on linear sum of errors
Geometric, fg 1.00 50 17 11 1
Thermal, ft 0.50 25 8 6 1
Load-induced (deflection), fl 0.50 25 8 6 1
Process, fp 0.00 0 0 0 0
Based on root square sum of errors
Geometric, fg 1.00 82 47 45 5
Thermal, ft 0.50 41 24 23 2
Load-induced (deflection), fl 0.50 41 24 23 2
Process, fp 0.00 0 0 0 0
Average (expected case) of linear and RSS
Geometric, fg 1.00 66 32 28 3
Thermal, ft 0.50 33 16 14 1
Load-induced (deflection), fl 0.50 33 16 14 1
Process, fp 0.00 0 0 0 0
ls
modified AHS 2014.04.09
D
0.2 0.2 0
2 2 0
1 1 0
1 1 0
0 0 0
9 9 0
5 5 0
5 5 0
0 0 0
e) of linear and RSS
6 6 0
3 3 0
3 3 0
0 0 0
characteristic length 0.2
cte 2.00E-05
delta T 5
error amount (microns) 2.00E+01