Professional Documents
Culture Documents
Photodarlington Optocouplers (No Base Connection) : Description
Photodarlington Optocouplers (No Base Connection) : Description
MOC8030
MOC8050
DESCRIPTION PACKAGE DIMENSIONS
The MOC8030 and MOC8050 are photodarlington-type optically
coupled optocouplers. The devices have a gallium arsenide infrared
emitting diode coupled with a silicon darlington phototransistor.
PIN 1
ID.
0.270 (6.86)
0.240 (6.10)
FEATURES
• High BVCEO
-Minimum 80 V 6
SEATING PLANE
• High current transfer ratio 0.350 (8.89)
-300% (MOC8030) 0.330 (8.38)
ANODE 1 6 N/C
0.016 (0.40)
APPLICATIONS 0.022 (0.56)
0.008 (0.20)
0.300 (7.62)
0° to 15° TYP
• Appliances, measuring instruments CATHODE 2 5 COLLECTOR
0.016 (0.41)
MOC8030
MOC8050
TRANSFER CHARACTERISTICS
DC Characteristic Test Conditions Symbol Min Typ** Max Units
Current Transfer Ratio, MOC8030 (IF = 10 mA, VCE = 1.5 V) 300
CTR %
Collector-Emitter MOC8050 (IF = 10 mA, VCE = 1.5 V) 500
TRANSFER CHARACTERISTICS
Characteristic Test Conditions Symbol Min Typ** Max Units
SWITCHING TIMES
ton 3.5 µs
Turn-on Time
(VCC= 10 V, RL = 1001, IF = 5 mA)
Turn-off Time toff 95 µs
ISOLATION CHARACTERISTICS
Characteristic Test Conditions Symbol Min Typ** Max Units
(II-O 61 µA, 1 min.) 7500 Vac(pk)
Input-Output Isolation Voltage VISO
(II-O 61 µA, 1 min.) 5300 Vac(rms)
Isolation Resistance (VI-O = 500 VDC) RISO 1011 1
Isolation Capacitance (f = 1 MHz) CISO 0.5 pf
Note
** Typical values at TA = 25°C
MOC8030
MOC8050
10
TA = 0˚C, 25˚C
TA = 70˚C
TA = 100˚C
TA = -55˚C
NORMALIZED TO:
NORMALIZED TO:
CTR @ IF = 10 mA
CTR @ IF = 10 mA
TA = 25˚C
TA = 25˚C
VCE = 10 V
VCE = 5 V
0.1 0.1
0.1 1 10 100 -80 -60 -40 -20 0 20 40 60 80 100 120
IF - LED INPUT CURRENT (mA) TA - AMBIENT TEMPERATURE (˚C)
Fig. 1 Output Current vs. Input Current Fig. 2 Current Transfer Ratio vs. Ambient Temperature
16 10000
ICEO - COLLECTOR-EMITTER DARK CURRENT (nA)
NORMALIZED TO:
NORMALIZED TO:
IC - COLLECTOR CURRENT (NORMALIZED)
IF = 1 mA
TA = 25˚C
14 VCE = 5 V VCE = 10 V
1000
12
IF = 10 mA
100
10
IF = 5 mA
8
10
6
1
4 IF = 2 mA
2 0.1
IF = 1 mA
0
0.01
0 1 2 3 4 5 6 7 8 9 10 0 20 40 60 80 100
Fig. 3 Collector Current vs. Collector-Emitter Voltage Fig. 4 Dark Current vs. Ambient Temperature
1000 1000
RL = 1 k1
VCC = 10 V
100
RL = 1 k1
RL = 100 1 100
TOFF - TIME (µs)
TON - TIME (µs)
10 RL = 10 1
RL = 100 1
10
RL = 10 1
1
VCC = 10 V
1
0.1
0.1 1 10 100 0.1 1 10 100
Fig. 5 Turn-On Time vs. Input Current Fig. 6 Turn-Off Time vs. Input Current
MOC8030
MOC8050
ORDERING INFORMATION
Order
Option Entry Description
Identifier
S .S Surface Mount Lead Bend
SD .SD Surface Mount; Tape and reel
W .W 0.4” Lead Spacing
300 .300 VDE 0884
300W .300W VDE 0884, 0.4” Lead Spacing
3S .3S VDE 0884, Surface Mount
3SD .3SD VDE 0884, Surface Mount, Tape & Reel
12.0 ± 0.1
4.85 ± 0.20
4.0 ± 0.1 Ø1.55 ± 0.05
0.30 ± 0.05 4.0 ± 0.1
1.75 ± 0.10
7.5 ± 0.1
0.070 (1.78)
0.060 (1.52)
MOC8030 2
6
V XX YY K
3 4 5
Definitions
1 Fairchild logo
2 Device number
VDE mark (Note: Only appears on parts ordered with VDE
3
option – See order entry table)
4 Two digit year code, e.g., ‘03’
5 Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
300
215°C, 10–30 s
250
Temperature (°C)
225 C peak
200
150
100 Time above 183°C, 60–150 sec • Peak reflow temperature: 225°C (package surface temperature)
• Time of temperature higher than 183°C for 60–150 seconds
50 Ramp up = 3C/sec • One time soldering reflow is recommended
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
Time (Minute)
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™ FAST ISOPLANAR™ Power247™ Stealth™
ActiveArray™ FASTr™ LittleFET™ PowerEdge™ SuperFET™
Bottomless™ FPS™ MICROCOUPLER™ PowerSaver™ SuperSOT™-3
CoolFET™ FRFET™ MicroFET™ PowerTrench SuperSOT™-6
CROSSVOLT™ GlobalOptoisolator™ MicroPak™ QFET SuperSOT™-8
DOME™ GTO™ MICROWIRE™ QS™ SyncFET™
EcoSPARK™ HiSeC™ MSX™ QT Optoelectronics™ TinyLogic
E2CMOS™ I2C™ MSXPro™ Quiet Series™ TINYOPTO™
EnSigna™ i-Lo™ OCX™ RapidConfigure™ TruTranslation™
FACT™ ImpliedDisconnect™ OCXPro™ RapidConnect™ UHC™
FACT Quiet Series™ OPTOLOGIC µSerDes™ UltraFET
Across the board. Around the world.™ OPTOPLANAR™ SILENT SWITCHER VCX™
The Power Franchise PACMAN™ SMART START™
Programmable Active Droop™ POP™ SPM™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Rev. I13
This datasheet has been download from:
www.datasheetcatalog.com