Professional Documents
Culture Documents
Developing Partnerships Worldwide: Shared Values
Developing Partnerships Worldwide: Shared Values
SHARED VALUES
SHARED VISION
ASSURED QUALITY | MARKET LEADER | HIGH ASPIRATIONS
SAFER BUILDINGS | SAVING LIVES
2
1.0
WHO WE ARE ®
3
1.1
OUR TEAM
4
2.0
WHAT WE DO ®
We work very closely with our Partners and ensure that they are
well-trained and fully supported so that they can consistently
maintain an unrivalled performance to their customers.
SERVICES
Site Surveys, Inspections and Certification
5
3.0
OUR PRODUCTS
6
3.1
PRODUCT APPLICATIONS ®
7
3.1
APPLICATIONS
Under everyday operating conditions, the smoke ventilation system works as normal by supplying or
extracting air from designated areas.
In a fire condition, however, the dampers on the standard system close and automatic dampers on the emergency system open to
allow the system to function as either a smoke extract or pressurisation system. The ductwork must be fire resisting to satisfy the
compartmentation of the building.
8
4.0
PROJECTS ®
CASWELL FIRESAFE®
HAS BEEN INSTALLED IN
OVER 500 BUILDINGS.
HERE IS A SELECTION
OF OUR PROJECTS. INTERNATIONAL AIRPORT U-BORA TOWERS
- ABU DHABI, UAE - DUBAI, UAE
9
4.0
PROJECTS
EIRCOM HQ
GALAXY MEGA RESORT THE LOUVRE
- HUDSON SQUARE,
- MACAU, PRC - ABU DHABI, UAE DUBLIN, EIRE
10
5.0
INTERNATIONAL PARTNERS ®
11
6.0
BECOMING A PARTNER
WE ARE ACTIVELY
SEEKING NEW PARTNERS
IN REGIONS AROUND THE
GLOBE THAT ARE NOT
CURRENTLY COVERED
BY EXISTING LICENSING
AGREEMENTS.
6.1
WHY FIRESAFE?
We believe the following make a compelling case for • Comprehensive training to ensure our Partners
selecting us as your partner of choice: thoroughly understand CASWELL FIRESAFE® products
and the range of applications for which they are suited
• Market-leading CASWELL FIRESAFE® product • Working closely with our Partners to assist them in
• Peerless customer support securing necessary Local Authority approvals
• Dedicated staff with in-depth technical knowledge • Regular, scheduled compliance visits to verify that our
and solutions expertise Partners are manufacturing, installing and certifying
• International experience systems to the correct standards
• Face-to-face in-house training at our Partners’
manufacturing facilities
• Where required, we organise and undertake whatever
additional testing is needed to meet ever-changing
Standards and Codes of Practice
12
6.1
WHY FIRESAFE?
®
PRODUCT
CASWELL FIRESAFE® is a range of non-coated fire resisting
ductwork products. It is a market leader in establishing this
distinct product category on the international stage and
is fully tested and certified to the most stringent regional,
country and ISO standards. It offers excellent value, especially
when compared with alternative methods of providing fire
resisting ductwork.
• Faster manufacturing turnaround as there is no need for GALAXY MEGA RESORT, MACAU
etch priming, spray coating or application of factory
applied coverings
• Cleaner finish is less prone to damage and therefore
repairs are not needed
• Only standard ductwork manufacturing facilities are ALL VALUABLE BENEFITS
required and there is no need for specialist paint set up
• Environmentally benign as no hazardous substances WHICH BRINGS CUSTOMERS
are used in manufacturing our systems
• Faster to install and easier to handle BACK TIME AFTER TIME.
• Lower manufacturing and installation costs
than coated / clad systems means contractors can be
confident that Plan of Work deadlines will be met, so
avoiding potential penalties
13
6.1
WHY FIRESAFE?
OUR STAFF
We are proud to have some of the most experienced
and technically competent staff in our industry.
PROJECTS
CASWELL FIRESAFE® was first installed
internationally in Hong Kong in 2003.
PARTNERS
BUSINESS IS YOU”
This network has been enhanced by the addition of
a new Partner in 2017, which will extend reach into
Malaysia, the Philippines and Singapore.
- Nisha Vinod
CASWELL FIRESAFE® is a premium product and
Head of Fire Rated Ductwork has helped to transform the businesses of our
at Seagull HVAC LLC (Dubai) International Partners.
14
6.2
WHAT DO WE EXPECT OF OUR PARTNERS? ®
15
6.3
MANUFACTURING LICENSE AGREEMENT (MLA)
6.3.1
LICENSED PARTNER OBLIGATIONS
• Promote, develop and expand the sales of the • Ensure all Firesafe quality procedures are
licenced product - CASWELL FIRESAFE®- followed including factory inspections, site
within the agreed territories inspections, maintaining quality inspection
• Manufacture, and if applicable install, records and certificates of conformity / letters
CASWELL FIRESAFE® in accordance with of non-conformity
the Firesafe Manufacture & Installation • Ensure the CASWELL FIRESAFE® corporate
Manual (CQC/1) branding for the licence product is met and
• Apply for all local approvals to supply the maintained
licenced product within the agreed territories
6.3.2
OUR OBLIGATIONS
• Provide the licence with the Firesafe • Carry out two compliance visits each
Manufacture and Installation Manuals year to ensure the licencee is complying
• Keep the licencee informed of any with Firesafe specifications and standards
changes in respect to applicable test • Provide training and online / phone
standards, regulations and legislation technical support
relevant to the licenced product
16
®
6.3.3
FINANCIAL AGREEMENT
6.3.4
APPROVALS AND COMPLIANCE
• The Licenced Product must have valid test and assessment reports
• The Licenced Product must be approved by the Authority having
jurisdiction in the territory in which it is to be sold
• The Quality system as provided by FFRDL to the Licenced
Partner must be adhered to all times
• All required inspections and compliance visits are to be undertaken
and the Licenced Partner is to co-operate with the applicable
authorities
• Certification and Non-Conformance Procedures to be followed
• Payments to be made in accordance with the terms of Agreement
• Reporting structure as detailed in the MLA must be strictly applied
17
6.3.5
OWNERSHIP & SUB-CONTRACTING
• The MLA sets out any provisions for the sub-contracting of the
Licenced Product which would be for the manufacture and, if
applicable, the installation
• The MLA will clarify the role of each of the parties and
sub-contractors
• The responsibilities and obligations on each party will be defined
• Any modifications or additions to the Licenced Product will be
controlled by, and ultimately owned by, FFRDL regardless of the
source of the idea or proposal
6.3.6
THE LEGAL PARTS
18
7.0
NOTES ®
19
ED IN BR
N I T
IG
AI
S
DE
N
®
M
E
ID
AN
UF W
AC LD
TU RED WOR