This document provides specifications for an XGLO horizontal multimode fiber optic cable. It lists the maximum insertion loss, bandwidth, and transmission distances at 850nm and 1300nm wavelengths. Bandwidth is measured at the factory but does not require field testing. Transmission distances are specified for Gigabit and 10 Gigabit Ethernet protocols. A minimum return loss of 25dB is indicative that the insertion loss is within listed limits.
This document provides specifications for an XGLO horizontal multimode fiber optic cable. It lists the maximum insertion loss, bandwidth, and transmission distances at 850nm and 1300nm wavelengths. Bandwidth is measured at the factory but does not require field testing. Transmission distances are specified for Gigabit and 10 Gigabit Ethernet protocols. A minimum return loss of 25dB is indicative that the insertion loss is within listed limits.
This document provides specifications for an XGLO horizontal multimode fiber optic cable. It lists the maximum insertion loss, bandwidth, and transmission distances at 850nm and 1300nm wavelengths. Bandwidth is measured at the factory but does not require field testing. Transmission distances are specified for Gigabit and 10 Gigabit Ethernet protocols. A minimum return loss of 25dB is indicative that the insertion loss is within listed limits.
50/125m Parameter (850nm/1300nm) Max. Insertion Loss (dB) 1.6/1.4 Laser - 2000/- Bandwidth (MHzkm) 1 OFL - 1500/500 Gigabit Transmission Distance (m) 2 900/600 3 10 Gigabit Transmission Distance (m) 300/300 Min. Return Loss (dB) 4 25 1 Bandwidth is an important performance parameter, but because it is intrinsic to the fiber and cannot be adversely affected by installation practices, it does not require testing in the field. Note that measurements for bandwidth have been performed at the factory in accordance with the procedures and overfilled launch conditions as specified within EIA/TIA-455-51 and IEC/ISO 793-1-C2A. 2 The protocol pertinent to the transmission distances as noted is Gigabit Ethernet per IEEE 802.3z. 3 The protocol pertinent to the transmission distances as noted is 10 Gigabit Ethernet per IEEE 802.3ae. 4 If the insertion loss is within the limits as noted in the above chart, it is indicative that the Return Loss performance of the link will be within the limits as indicated.