Professional Documents
Culture Documents
Lab Report 5
Lab Report 5
CMS 240783
CAPT ALI TARIQ
OD-88(B)
LAB REPORT 5
PRC-II
INSTR
LEC SARMAD
MCE
LAB REPORT 5
1. SCOPE:-
Determine modulus of elasticity of concrete cylinder using ASTM C469
2. METHODLOGY:-
Fol method should be followed:-
a. Prior to performing test, use companion specimen to determine the compressive strength of
the concrete cylinder.
b. After attaching compressometer to the specimen, load the specimen at least twice to 40% of
the cylinders compressive strength to seat the gauges.
c. ASTM test speed: Screw machine=0.05in/min , Hydraulic= 35+/- 5 psi/sec.
3. PROCEDURE:-
a. Place the sample in test frame.
b. Use reference circles on the platen to center the specimen.
c. Determine the initial and stabilized secant modulus.
d. Start E modulus software and input sample data and set measuring channels
e. Connect cable to compressometer
f. Check cycles and step to loading cycles
g. Plot Stress/Strain Graph
4. APPARTUS:-
a. 60,000 lbs. Baldwin UTM
b. ADMET Gauge Buster
c. Compressometer
d. Concrete Cylinders
5. CALCULATIONS:-
(Ultimate Load=36.5 Mpa x40/100=14.6)
a. Initial Tangent Modulus =15/400x10-6=37.5 GPa
b. Secant Modulus= 14.6/(430x10-6)=33.9 GPa
c. Chord Modulus= 14.6-2.5/(430x10-6)-(50x10-6)=31.8 GPa
6. GRAPH:-
Graph 14
40
35
30
25
Stress, MPa
20
15
10
0
0 500 1000 1500 2000 2500
Strain (micro)