May 2018 Technical Data Sheet: Octyl/Decyl Trimellitate TMC - C

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

OCTYL/DECYL TRIMELLITATE

TM C8 – C10
Especificaciones Valores
Density 20 ºC g/cm 3 0,968 – 0,978
Technical Data Viscosity 20 ºC p. 1,20 – 1,35
Sheet
May 2018
Viscosity Index
Acid value mg KOH/g
100
≤ 0.3
Volatile matter 100°C, 3h ± 0,36%
Gardner colour ≤2
Flash Point ºC 224
Pour Point ºC - 46
Electric resistively Ω.cm 1014
Empiric formula C31H37O5
Solubility in water mg./L Insoluble
Substitution factor DOP 1.12
Aspect Liquid

Molecular Weight 529


CAS number 3319-31-1 / 27178-16-1
EINECS number 222-020-0 / 248-299-9

Description

TMC8 – C10 is a primary monomeric plasticizer of TMC8 – C10 due to its viscosity, can reach very
high molecular weight. based on alcohols with C8 good results at low temperatures
and C10 chains.
REACH
TMC8 – C10 due to its boiling point it has the
properties of low volatility and non-migration. It is Preparation exempted of registered substances.
resistant to agents in aqueous medium, but is
quite sensitive to oils and hydrocarbons, Application
recommending for this case blending with a
TMC8 – C10 is used in a wide range of
polymeric plasticizer.
applications in the plastic transformer industry:
due to its dielectric resistivity characteristics in
TMC8 – C10 TMC8 - C10 is a plasticizer that has a
cable insulation. It is a good plasticizer for acrylic
high boiling point and a very low freezing point, for
emulsions and inks.
this reason it withstands a wide range of
temperatures, which produces a high resistance to
In the lubricants industry, additive for oils and
ageing.
hydraulic fluids. Good properties at low
temperatures. Thermic stability and oxidation to
TMC8 – C10 is very stable to the action of chemical
heat. Hydrolytic resistance, which implies the
and external agents, not producing yellowing due
reduction of properties and degradation of
to light.
lubricants and the possibility of corrosion if used
in metals.
TMC8 – C10 has high dielectric resistance, so it is
very useful for use in electrical wires.
Dosage
TMC8 – C10 is often a good complementary for It is advised between 30 - 50 % on the resin.
polymeric plasticizers.
Packaging
TMC8 – C10 can withstand temperatures up to Containers 1.000 kg and drums 200 kg.
105°C.

Circunvalación, 27 www.traquisa.es Tf: 34 937 290 414/474/354


08210-Barbera del Valles traquisa@traquisa.es Fax: 34 937 192 321

You might also like