Fluke Corporation
Everett, Washington 98206
USA
Certificate of Calibration
‘The Fluke Corporation, NQA ISO 9001 :2008 ISO Certification No 10100, certifies that the
instrument identified herein was calibrated in accordance with applicable Fluke calibration
procedures. Their calibrations processes are IS0-9001 controlled and are designed to verify
the instrument was within its published specifications at the time of calibration,
This calibration is traceable to the SI through recognized national measurement institutes,
ratiometric techniques, consensus standards, or natural physical constants. The calibration
has been completed in accordance with the Fluke Quality System document QSD 111.0. This
certificate applies to only the item identified and shall not be reproduced other than in full,
‘without the specific written approval by Fluke Corporation. The user is obliged to have the
object recalibrated at appropriate intervals.
In the attached measurement results, measurement error may be expressed with units,
(measurement error equals measured result subtracted from the reference value) or as a
proportion of the measurement error to the reference value expressed as percent.
Quality Assurance Manager
Fluke Corporation
For customer uso only
Please fil in appropriate dates as indicated:
Date Instrument Received: NA [“* ] 202.0
Date Catibration Due: Wo (7% 207)
ow geno 72018
Fluke Corporation Jephone ‘i Bal
PORKEER "42834716100 wEHESTIC pw ake oeProduction Verification Test Data
Model: 1664FC SN: 4975038 Date: 12/05/2020
Function Applied Stimulus
Response Low Limit High Limit Units
VAC 0.4: V @ 60 Hz 04
VAC 230 V @ 50 Hz 229.5
VAC 495 V @ 50 Hz 493.7
RLO 20 Ohm range at 19.65 Ohm 19.67
RLO 200 Ohm range at 196.5 Ohm 196.1
RLO 2000 Ohm range at 1965 Ohm 1954
RLO Test current 250 mA at 2 Ohm 0.26
RISO Test voltage 500 V 520
RISO Insulation resistance 0.50 MOhm 0.50
RISO Insulation resistance 225 MOhm 225
RISO Test current 1 mA at 500 kOhm (nominal) 0.00102
RISO _ Test voltage 1000 V 1037
RISO Insulation resistance 0.1 MOhm On
RISO Insulation resistance 1.0 MOhm 10
RISO Insulation resistance 195.0 MOhm 194.9
RISO Insulation resistance 900 MOhm 899
RISO Test current 1 mA at | MOhm (nominal) 0.00102
Zl Line-Neutral 0.50 Ohm at 230 V/5S0Hz 0.50
ZI Line-Neutral 18.00 Ohm at 230 V / 50 Hz 18.03
Zl Line-Neutral 180.0 Ohni’at 110 V / 60 Hz 179.4
Zi Line-PE 1800 Ohm at 240V/50Hz 1837
RCD deltaT Tripping speed test at 30 mA. 296
RCD deltaT Tripping speed current at 30 mA 0.032
RCD deltaT Tripping speed test at 1000 mA 297
RCD deltaT Tripping speed current at 1000 mA. 1.079
RCD Idelta 10 mA RCD trip current at 750 ms, PASS
RE Compliance voltage 25 V 2
RE Frequency 128
RE 200 Ohm range at 0.5 Ohm 07
RE 2000 Ohm range at 1800 Ohm 1798
Phase Seq. Correct sequence "1-2-3 PASS
Phase Seq. Incorrect sequence "3-2-1" PASS
0.1
227.9
490.8
19.33
193.3
1933
0.20
500
0.47
202.5
0.00100
1000
0.0
07
191.8
810
0.00100
0.45
17.60
176.4
1692
291
0.030
291
1.000
20
124
0.0
1727
07
232.1
499.2
19.97
199.7
1997
0.30
550
0.53
247.5
0.00110
1100
04
13
198.2
990
0.00110
0.55
18.40
183.6
1908
299
0.033
299
1.100
30
132
1.0
1873
v)
wv)
wv)
(Ohm)
(Ohm)
(Ohm)
(A)
Ww)
(MOhm)
(MOhm)
(A)
(v)
(MOhm)
(MOhm)
(MOhm)
(MOhm)
(a)
(Ohm)
(Ohm)
(Ohm)
(Ohm)
(ms)
(A)
(ms)
(a)
™)
(Hz)
(Ohm)
(Ohm)