Professional Documents
Culture Documents
IP Quick Start Guide
IP Quick Start Guide
1 Install the WattBox and connect to the 2 Install the WattBox Configuration 3 Update the WattBox to the Latest
Network Utility Firmware
WB-600-IPVCE-12
ALWAYS ON 1 ALWAYS ON 3 CONTROLLED 1 CONTROLLED 3 CONTROLLED 5 CONTROLLED 7 TM
WB-600-IPVCE-12
NETWORK
GROUND
LUG
INTERNET
IN IN AUTO REBOOT
PROTECTED
GROUNDED
ON OFF
Router
1 2 abc 3 def 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv
CALL MODE/ MENU/ESC BACK PTZ
PAGE
HDD
9 wxyz 10 0 11 * 12 # 13 14 15 16
NET
ENTER
/
REC
ID WPS-300-DVR-9CH
ALARM RESET
Select a WattBox from the device list Select a WattBox IP address from the list
Select Use Following Static IP Address Select the appropriate Time Zone and click apply next to
Time Zone
Enter an available Static IP Address The correct date and time will be autotmatically set, no
The default browser will open with a login screen other settings require changing for basic setup.
Enter the Subnet Mask
Default Username: admin
Enter the Default Gateway Default Password: none (Leave Blank)
(IP Address used to access the router)
Outlet Setup including names, control, and delay settings Documents and Software on www.SnapAV.com or CD
Rom
Website and IP Addresses to trigger Auto Reboot of WattBox IP Hardware Owner's Manuals
outlets
WattBox Web Interface User’s Manual
User accounts for access to control the WattBox by the
customer
WattBox Utility
Outlet On and Off schedules
Latest Frimware for WattBox IP Products
(Web Only)
System Status Email Notifications
WB-600-IPVCE-12
NETWORK
GROUND
LUG
INTERNET
IN IN AUTO REBOOT
PROTECTED
GROUNDED
ON OFF
TM
© 2012 WattBox™ 121004-1822