Professional Documents
Culture Documents
AITIS Company Profile
AITIS Company Profile
Al Tamimi Industrial
مؤسسة عبدﷲ إبراهيم التميمي للخدمات الصناعية
Services Establishment
أعمال فحص واختبار
Testing & Inspection Works
Contacts:
Gopikrishnan.T
Business Development Engineer
Mobile: +966 500 566 806
Email: gopikrishnan@tamimiservices.com
Abdallah I. Al Tamimi Industrial
مؤسسة عبدﷲ إبراهيم التميمي للخدمات الصناعية
Services Establishment
أعمال فحص واختبار
Testing & Inspection Works
Services:
Abdallah I. Al Tamimi Industrial Services Establishment (AITIS) has qualified and certified teams for all
NDT methods capable to perform almost all NDT & inspection techniques both at large and small scales
and with highly distinguished level of quality.
AITIS offers the services of all conventional NDT techniques as well as Advanced NDT using the latest
models of instruments and materials and following the latest versions of the ASME codes and consequent
procedures.
AITIS has worked for many reputable companies all around the Kingdom; Major NDT jobs are completed
in the field of Power Stations, Refineries & Petrochemicals, Steel Plants, Storage Tanks, Pipe Mills, and
Cross Country Pipe Line.
Conventional NDT:
Radiographic Testing – RT
Ultrasonic Testing – UT
Magnetic Particle Testing – MT
Liquid Penetrate Testing – PT
Visual Testing – VT
Abdallah I. Al Tamimi Industrial
مؤسسة عبدﷲ إبراهيم التميمي للخدمات الصناعية
Services Establishment
أعمال فحص واختبار
Testing & Inspection Works
Advanced NDT:
Eddy Current Testing – ET
Remote Field Eddy Current Testing – RFET
Guided Wave or Long Range Ultrasonic Testing – LRUT
Internal Rotary Inspection System – IRIS
Low Frequency Electromagnetic testing (LFET)- Tank Floor Inspection
Vibration Analysis Testing – VA
Weld Inspection- Balance Field Eddy current testing (BFET)
Boiler Water wall tube Inspection by LFET
IRIS is an ultrasonic based system for inspecting ferrous and nonferrous tubes from the inside. It is applied
on almost any material. With the IRIS, accurate thickness measurements can be taken at any location along
the tube, so small changes in thickness are measurable and the exact location of pitting and corrosion can
be determined.
Vibration Analysis
Advanced vibration analyzer can quickly and accurately identify developing faults in rotating machinery,
allows maintenance personal to monitor more machines in less time, and focus their efforts on developing
faults instead of chasing the next breakdown.
Balance Field Electromagnetic Technique (BFET) to detect surface and sub-surface cracking in welds and
base metal. With maximum scanning speeds of one foot per second, this technique is much faster than
conventional NDT techniques such as dye penetration and magnetic particle testing.
This can virtually be used anywhere that cracking is an issue, including the scanning of both ferrous and
nonferrous metals. It can be used on pressure vessels, general vessels, windmill towers, storage tank floors
and shells, and bridges. It has many weld applications, including tube-to-header weld and dissimilar metal
weld inspections. It also works on a variety of different types of welds, including butt-welds, lap-welds,
and T-welds. For butt welds, no couplant is needed, it offers four inches (101mm) of coverage per pass
and inspects both sides of the weld with one pass.
Abdallah I. Al Tamimi Industrial
مؤسسة عبدﷲ إبراهيم التميمي للخدمات الصناعية
Services Establishment
أعمال فحص واختبار
Testing & Inspection Works
Waterwalls, Super Heaters and Reheaters: To inspect waterwalls, super heaters and reheaters, we use
the TS-2000 Tube Scanning system based on the Low Frequency Electromagnetic Technique (LFET).
From the OD, LFET technology scans approximately 120 degrees of the tube circumference with a single
pass of the scanner. Any flaw indications (or areas that we cannot scan due to tube bends, welds, viewports,
etc.) are proved-up using A-Scan ultrasonics.
Abdallah I. Al Tamimi Industrial
مؤسسة عبدﷲ إبراهيم التميمي للخدمات الصناعية
Services Establishment
أعمال فحص واختبار
Testing & Inspection Works
Special Services:
Heat treatment Services (Post Weld Heat Treatment & Pre Heat Treatment)
Holiday Testing
Failure Analysis
API Services
Abdallah I. Al Tamimi Industrial Services Establishment (AITIS) Policy is to guarantee a high quality of
training and success to our candidates in continual education. In today's changing world, we change
accordingly adopting to new system of training methodology while maintaining our reputation of reliability
and systematic approach in present competitive world.
AITIS launched unique courses / seminars to impart knowledge of "Manufacturing, International standards
and codes, Welding Technology and NDT" by using renowned and proven methodology.
AITIS has faculty with hands on experience in training program to deliver quality and effective skills
training.
The Vision of the AITIS is to provide services to Engineers, Industries & the Society with high quality of
training, certification & consultancy in quality systems.
ASNT Level-III Refresher Course in UT, VT, PT, MT, RT & ET.