Professional Documents
Culture Documents
04-Fire Fighting Valves and Hydrants SVMC
04-Fire Fighting Valves and Hydrants SVMC
AVK SVVM
MCC
AV K Va l v e s & H y d r a n t s
for Fire Fighting
2
AV K B u i l d s L o n g L i f e a n d G o o d E c o n o m y
into your Fire Fighting Systems
AVK SVMC
Product development
In co-operation with the end user, new products are field tested
before the final market launch, thus achieving the best result in
the individual markets.
3
Brave firemen risk their lives to extinguish fires. They rely fully
on their equipment to function perfectly when needed. Therefore
it is crucial that the products installed are highly reliable, are easy
to maintain and last a lifetime. AVK is a leading suppliers of
high quality hydrants and valves for fire fighting and sprinkler
systems. Our unique design and wide product range is based
on the needs of customers worldwide. We offer a wide range of
high quality valves and hydrants which, along with a series of
accessories, build the optimum solution.
Gate Valves
Series Number
21/60 45/5C 45/00
Description AVK Resilient Seat Wedge AVK OS&Y Rising Stem, AVK Non-Rising Stem Post
Gate Valve, PN10/16/ANSI Resilient Gate Valve, PN16 Indicator Seat Wedge
/ ANSI Gate Valve, PN16 / ANSI
Application For use with water and For use with water and For use with water and
neutral liquids. neutral liquids. neutral liquids.
Main Features • Stem cap as standard. • Fully rubber coated • Fully rubber coated
• Ductile iron wedge, fully wedge. wedge.
vulcanised with EPDM. • Full bore. • UL Listed, FM Approved.
• • Low torque operation. • Full bore.
• Fully corrosion resistant • UL-Listed, FM-approved. • Low torque operation.
construction.
• Fusion bonded epoxy
coated.
• Body bonnet bolts
sealed with hot melt.
• Bosses for sampling.
• Full bore
Main Options • Handwheel. • Low zinc bronze stem • Bonnet Bolts Option
• Electric actuation. material. a): Stainless Steel
• Bevel or spur • CTC. - A4 - Grade 316 sealed
gearboxes. with hot melt
• Drilling to ISO 7005-2 • Gland Bolts Option
(EN 1092-2:1997,DIN a): Stainless Steel
2501). - A4 - Grade 316
• Alternate flange • CTC.
drillings.
• CTC.
Max Working Pressure 16 Bar (1.6 mpa) 16 Bar (1.6 mpa) 16 Bar (1.6 mpa)
27/00 29 24/90 34
AVK Dry barrel fire hydrant AVK Underground Fire AVK Wet Barrel Fire Hydrant AVK Indicator Post/Wall Post
Hydrant, PN16 For Gate Valves
For use with water and For use with water and For use with water and For use with water and
neutral liquids. neutral liquids. neutral liquids. neutral liquids.
• UV-resisitant coating • Fully maintainable. • Excellent outlet flow • Fusion bonded epoxy
• UL/FM approved • Ductile iron • Corrosion resistance coating.
• Excellent outlet flow construction. FBE coating • Easily readable open/
• Corrosion resistance • 2½” London round • UL / FM close marking.
FBE coating thread gunmetal outlet. • Special coating options • Easy to install.
• Bronze and SS 316 • Exceeds flow • UV resistant coating • Designed to fit post
internals requirements. indicator gate valves.
• NST threaded • Corrosion resistant • UV Resistant coating
outlets 4"-4 1/2" & 5" construction.
Stortz • Universal drilled inlet
• Special coating options flange.
• Inlet sizes 4"& 6" with • Inlet is of a proprietary
duck foot bend inlet type.
flanges to PN 16 RF and • Auto-frost drain valve as
ANSI FF standard.
• Draining stopper.
• Low weight design.
Serviceable under • Fixed or loose stopper. • Bolting materials
pressure • PN 25 version. NST threaded / outlets a) Stainless steel
• 360 degree nozzle • Outlet options: 2-2 1/2" and 1 - 4 or 4 - A2 - Grade 304.
section rotation Gunmetal or stainless 1/2" and 5" Stortz b) Stainless steel
• UL/FM approved steel to BS 750 round • Inlet sizes 4" & 6" with - A4 - Grade 316.
• Traffic breakable flange thread or Instantaneous. breakable flanges to • Post Indicator lengths
• Pumper nozzle 4" BS ANSI FF to various bury depths.
336 • Pumper nozzle 4" BS
• 8" duck foot ANSI 336
Series Number
27/46 06/35 45/4X
Description AVK dry barrel AVK resilient seat wedge AVK resilient seat wedge
fire hydrant gate valve with gate valve
Pin Indicator
Application For use with water and For use with water and For use with water and
neutral liquids neutral liquids neutral liquids
Product Picture
7
AV K D r y B a r r e l F i r e H y d r a n t s a r e
Designed for High Performance
Series 27
Post Indicators
P o s t I n d i c a t o r Va l v e s
The basic valve construction is, like valves for water supply,
characterized by a fully rubber coated wedge, full and straight
bore and low torque operation.
The series 27/00 dry barrel hydrant has two drain outlets located
just above the water main level. The main valve disc is designed
with the purpose of flushing the drain channels for soil and
other impurities during opening. These impurities could lead to
damage of the main valve disk. After turning the operation key 2
to 3 times the drain will stop flushing and the barrel will be filled
with water, which will flow directly into the hoses and pumper
hose or whatever is connected. Furthermore when the hydrant is
closed after service the barrel will drain the water through the
drain holes in the base. Therefore it is important to make sure
that the base is surrounded by gravel allowing the hydrant to
drain and flush without washing off the soil. If not, this could
result in undermining of the pavement.
Only after 1/8 turns on the stem the water starts to flow, and
after 12 turns the full flow capacity can be held against the fire.
The hydrant is not for use where the temperature may come
below 0°C, due to the risk of frost bursting.
Pipework installed above Sprinkler pipework installed visible - Sprinkler pipework installed visible - Pipeworks installed above
suspended ceiling - upright sprinklers with riser upright sprinklers with riser suspended ceiling -
pendent sprinklers pendent dry sprinklers
LER-A LER-A
NK NK
LA
LA
SPRI
SPRI
RM
RM
Escutcheon
Test line
for pump
Automatic feed
mechanism Water pressure vessel
Manifold
Town main
Over-
flow Control cabinet
drain
Town
Suction pipe main
Pump suction tank Fire pump Compressor unit Jockey pump Feeding tank
The basic valve construction is, like valves for water supply,
characterized by a fully rubber coated wedge, full and straight
bore and 3 independant stem seals.
The basic valve design is, like valves for water supply,
characterized by a fully rubber coated wedge, full and straight
bore.
With this design no iron parts are exposed to the medium and
the excellent rubber vulcanisation prevents creeping corrosion
underneath the rubber. The rubber is vulcanized onto the wedge
by AVK GUMMI A/S, one of Europe's leading manufacturers of
high technology moulded rubber components.
Standard stem sealing system Standard stem sealing system
for water applications to DIN for water applications to
The high quality of AVK rubber is characterized by: standard. AWWA standard.
• NBR wiper ring • NBR wiper ring
• Smell and taste response characteristics highly suitable for
• polyamid bearing with 4 O-rings • polyamid bearing with 2 O-rings,
the food industry • EPDM rubber manchette exchangeable under pressure
with the valve fully opened.
• Very low deformation ensuring optimum sealing • O-ring protects the antifriction
washers
• High impact resistance preventing corrosion
Optional stem material:
• Low friction ensuring low closing torques • Low zinc bronze
Accessories
f o r H y d r a n t s a n d Va l v e s
Series 08
AVK street cover for
Gate Valves
DN 80-600
FF231107
The designs, materials and specifications shown are subject to change without notice due to our continuing
programme of product development.
AVK SVMC
430220GE
JEDDAH
P.O. Box 10830 Jeddah 21443
Tel: (02) 6371 570 • Fax: (02) 635 4750
e-mail: sales@avksvmc.com • www.avksvmc.com
RIYADH AL-KHOBAR
P.O. Box 56941 Riyadh 11564 P.O. Box 2780 Al-Khobar 31952
Tel.: (01) 4783 853 / 4771 551 • Fax: (01) 4763 176 Tel./Fax: (03) 8824 640
www.avksvmc.com e-mail: avk@zajil.net
www.avksvmc.com