Product Specifications Product Specifications: RRZZ RRZZ - 65B 65B - R4 R4

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Product Specifications

CommScope—Proprietary and Confidential. Preliminary specifications are for illustrative purposes


only and will be updated prior to publication.
RRZZ
RRZZ--65B
65B--R4
8-port sector antenna, 4x 694–960 and 4x 1427–2690 MHz, 65° HPBW, 4x RET
l All Internal RET actuators are connected in “Cascaded SRET” configuration

l Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

Electrical Specifications
694– 790– 890– 1427– 1695– 1920– 2300– 2500–
Frequency Band, MHz
790 890 960 1518 1920 2180 2500 2690
Gain, dBi 14.4 14.7 15.1 15.9 17.1 17.5 18.1 17.8
Beamwidth, Horizontal,
67 65 61 66 60 62 59 64
degrees
Beamwidth, Vertical, degrees 11.9 10.6 9.7 8.5 7.2 6.4 5.4 5.1
Beam Tilt, degrees 2–14 2–14 2–14 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 16 21 15 15 16 18
Front-to-Back Ratio at 180°, dB 31 34 36 31 39 37 33 30
Isolation, dB 28 28 28 28 28 28 28 28
Isolation, Intersystem, dB 28 28 28 27 28 28 28 28
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port,
350 350 350 300 300 300 250 250
maximum, watts
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45°
Impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm

Electrical Specifications, BASTA*


Frequency Band, 1427– 1695– 1920– 2300– 2500–
694–790 790–890 890–960
MHz 1518 1920 2180 2500 2690
Gain by all Beam
14.0 14.5 14.8 15.6 16.6 17.0 17.6 17.3
Tilts, average, dBi
Gain by all Beam Tilts
±0.5 ±0.5 ±0.6 ±0.5 ±0.7 ±0.5 ±0.6 ±0.7
Tolerance, dB
2 ° | 14.0 2 ° | 14.6 2 ° | 15.0 2 ° | 15.5 2 ° | 16.6 2 ° | 16.9 2 ° | 17.5 2 ° | 16.9
Gain by Beam Tilt,
8 ° | 14.1 8 ° | 14.6 8 ° | 15.0 7 ° | 15.5 7 ° | 16.8 7 ° | 17.2 7 ° | 17.9 7 ° | 17.5
average, dBi
14 ° | 13.8 14 ° | 14.1 14 ° | 14.2 12 ° | 15.4 12 ° | 16.3 12 ° | 16.7 12 ° | 17.3 12 ° | 17.5

Beamwidth,
Horizontal Tolerance, ±3.8 ±3.8 ±4.9 ±3.7 ±5 ±3.1 ±7.9 ±8
degrees
Beamwidth, Vertical
±0.9 ±0.8 ±0.7 ±0.3 ±0.7 ±0.6 ±0.4 ±0.2
Tolerance, degrees
USLS, beampeak to
20° above 16 18 16 15 15 14 14 14
beampeak, dB
Front-to-Back Total
Power at 180° ± 19 20 21 25 31 28 28 26
30°, dB
CPR at Boresight, dB 21 19 23 17 18 19 19 20
CPR at Sector, dB 9 6 8 9 8 7 8 5

* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA,
download the whitepaper Time to Raise the Bar on BSAs.

Array Layout

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 20, page 1 of 3
2017 September 20, 2017
Product Specifications
RRZZ
RRZZ--65B
65B--R4

General Specifications
Operating Frequency Band 1427 – 2690 MHz | 694 – 960 MHz
Antenna Type Sector
Band Multiband
Performance Note Outdoor usage
Total Input Power, maximum 900 W @ 50 °C

Mechanical Specifications
RF Connector Quantity, total 8
RF Connector Quantity, low band 4
RF Connector Quantity, high band 4
RF Connector Interface 4.3-10 Female
Grounding Type RF connector inner conductor and body grounded to reflector and
mounting bracket
Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Location Bottom
Wind Loading, frontal 1135.0 N @ 150 km/h
255.2 lbf @ 150 km/h
Wind Loading, lateral 210.0 N @ 150 km/h
47.2 lbf @ 150 km/h
Wind Loading, rear 1117.0 N @ 150 km/h
251.1 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 150 mph

Dimensions
Length 1828.0 mm | 72.0 in
Width 498.0 mm | 19.6 in
Depth 197.0 mm | 7.8 in
Net Weight, without mounting kit 38.4 kg | 84.7 lb

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 20, page 2 of 3
2017 September 20, 2017
Product Specifications
RRZZ
RRZZ--65B
65B--R4

Remote Electrical Tilt (RET) Information


Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, idle state, maximum 1W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)
RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male

Packed Dimensions
Length 2017.0 mm | 79.4 in
Width 608.0 mm | 23.9 in
Depth 352.0 mm | 13.9 in
Shipping Weight 52.0 kg | 114.6 lb

Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

Included Products
BSAMNT-4 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains
one scissor top bracket set and one bottom bracket set.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 20, page 3 of 3
2017 September 20, 2017

You might also like