Professional Documents
Culture Documents
6-A, B) Impact Test On Aggregate, Crushing Test On Aggregate
6-A, B) Impact Test On Aggregate, Crushing Test On Aggregate
AIM:
APPARATUS REQUIRED:
1. IS Sieve (12.5 mm, 10 mm, 2.36 mm)
2. Tamping rod
3. Test sample
4. Hammer of weight 14 kg.
FORMULA:
Impact value = (W2 / W1) x 100
where,
W1 = Weight of the dry sample in g
W2 = Weight of fraction passing through IS 2.36 mm sieve in g.
PROCEDURE:
Aggregate passing through IS 12.5 mm sieve and retained in IS 10 mm sieve was
taken as the sample.
The test sample was filled in a mould in 3 layers by giving 25 blows for each.
layer using tamping rod and leveled.
The dry weight of the sample was noted as W1.
The whole sample was filled in a cylindrical steel cup.
The hammer was allowed to fall freely from a height of 38 cm on the aggregate.
The sample was subjected to 15 blows and it was sieved using IS 2.36 mm sieve.
The fraction passing through sieve was weighed and noted as W2.
The impact of the aggregates was calculated using the formula (W2 / W1) x 100.
48
OBSERVATION:
Empty weight of the mould =
Empty weight of the mould + aggregate a) =
b) =
Weight of dry sample, W1 a) =
b) =
Weight of fraction
Weight of the dry passing through IS Impact value
S.No. sample, W1 (W2 /W1) x 100
2.36 mm sieve,
W2
Unit g g %
1.
2.
MODEL CALCULATIONS:
Weight of the dry sample, W 1 =
Weight of fraction passing through IS 2.36 mm sieve, W 2 =
Aggregate Impact value (W 2 / W 1 ) x 100 =
Average Impact value =
RESULT:
49
EX. NO.
CRUSHING TEST ON AGGREGATE
DATE:
AIM:
To find the crushing strength value for the given sample of aggregate.
APPARATUS REQUIRED:
1. IS Sieve(12.5mm,10mm,2.36mm).
2. Tamping rod.
3. Test sample.
4. Hammer of weight 40 tonnes.
FORMULA:
Crushing Strength =
Where,
W1 = Weight of dry sample in g.
W2 = Weight of fraction passing through IS 2.36mm sieve in g.
PROCEDURE:
Aggregate passing through IS 12.5mm sieve and retained in IS 10mm sieve was taken
as the sample.
The test sample was filled in a mould in 3 layers by giving 25 blows for each layer
using tamping rod and leveled.
The dry weight of the sample was noted as W1.
The sample was transferred to a cylinder with base plate and was carefully leveled.
The plunger was inserted horizontally on the surface.
The apparatus was placed in the UTM and a total load of 40 tonnes was applied.
The fraction passing through IS 2.36 sieve was weighed and noted as W2.
50
The crushing strength value was calculated using the formula .
OBSERVATION:
Empty weight of the mould =
Weight of fraction
Weight of the dry passing through Crushing Strength
S.No.
sample,W1 IS 2.36mm sieve,
W2
Unit g g %
1.
MODEL CALCULATIONS:
Weight of dry sample,W1 =
Weight of fraction passing through IS 2.36mm sieve,W2 =
Crushing Strength = =
RESULT:
51
52