Professional Documents
Culture Documents
CADAM2D - Geometry Report: Geometry Lift Joint Material Properties
CADAM2D - Geometry Report: Geometry Lift Joint Material Properties
E
UPSTREAM
D I
H C
B
A
L1
Uplift pressures: Uplift pressures are considered as an external load (linearisation of effective stresses)
Dam-reservoir-foundation system
Period of vibration= 0.18904897 sec
Damping= 0.09070051 of critical
Cracking options
Tensile strength
cracking considered for all combinations: No Usual Flood Seismic Post-seismic
Crack initiation= ft / 3.000 ft / 3.000 ft / 3.000 ft / 3.000
Numerical options Crack propagation= ft /10.000 ft /10.000 ft /10.000 ft /10.000
Convergence method: Bi-section Seismic magnification= 1.500
Accuracy= Medium (1E-6) Uplift pressures
Static analysis: Full uplift pressures applied to the crack section
Dynamic analysis: Uplift pressures remain unchanged
Post-seismic analysis: Full uplift pressures applied to the crack section
D/S closed crack: Restore uncracked uplift condition
Drain effectiveness: No drain effectiveness under any cracking condition