Professional Documents
Culture Documents
7 Troubleshooting Guide: 7.1. No Power or No Display
7 Troubleshooting Guide: 7.1. No Power or No Display
7 Troubleshooting Guide: 7.1. No Power or No Display
Check DC-DC Converter Check Regulator IC Check Regulator IC Check Connector (CN2500)
OK IC (IC1003) Measured OK (IC1005) OK (IC1004) OK Measured 5/3.3/12/V OK If No Display on
6V at C1051 Measured 3.3V at Pin 2 Measured 1.6V at Pin 3 at Pin 1-4 FL Panel
[refer to check point 4 ] [refer to check point 5 ] [refer to check point 6 ] [refer to check point 7 ]
NG NG NG NG NG
Change IC1003 Change IC1005 Change IC1004 Check Main PCB Check Panel PCB
NG NG
option 1
Do the Cold Start
AC Plug-out. Press and Hold Check Main PCB
Power Button then
AC Plug-IN, wait to display "-------"
then will OFF the Set, back to start.
NG
option 2
Check Main PCB /
Bluetooth P.C.B (IC700) /
+5V regulator IC (IC7001)
NG NG
Check and Ensure that
Check Main PCB Panel Connector is
Properly Insert
NG
NG
Change IC1005
21
7.5. USB Device Cannot Detect
Press Power Button Press [ USB/CD] on the Set or Press Play
Plug-in USB Device to USB port
of Unit or Remote Control Remote Control to OK with Red LED indicated
OK FL Display OK No Problem
to Turn ON the Unit Select USB A or B, Display "Music Name or Title" Found
(e.g. USB B) FL Display "USB B"
"USB A/B" and "NO DEVICE"
NG NG
USBB_5V at CN2503 pin #7
(USBA_5V at pin # 6) Check Main PCB
[refer to check point 8 ]
NG
C D Pla y
Press Power Button
OK Press Play OK OK No Problem
of Unit or Remote Control CD Mode Output Sound
FL Display " Track & Count" Found
to Turn ON the Unit
NG NG
U SB Pla y
Press Power Button
OK Insert USB Thumdrive OK OK No Problem
of Unit or Remote Control USB Mode FL Display " USB A/B" Output Sound
to Turn ON the Unit Press "Play" Found
NG NG
NG NG
T une r M ode
Press Power Button
of Unit or Remote Control
OK OK OK No Problem
FM/AM Mode Search for Tuner Signal Output Sound
to Turn ON the Unit Found
NG NG
Check the Antenna
Check DSP IC (IC6500)
Wire Connection and
& Power Amp IC (IC6000)
Tuner IC (IC52)
NG NG
Check Main PCB,
NAND ROM IC, Check DSP IC (IC6500)
IC2007 & Power Amp IC (IC6000)
22
7.7. Check Point
SMPS Module
3 3
1
Sec. Cap. C6
Fuse (F1) Pri. Cap (C2) (13V or 33/39V)
(0 ohm) (300V or more)
Main PCB
IC1005_Pin 2
3.3V
C1051
(6V)
6 IC1004_Pin 3
1.6V
CN2500_Pin 1- 3 7
5V/3.3V/12V
8
CN2503
Pin #6 (USB-A)
/Pin #7 (USB-B)
5V
23